GT-1205A - Planet 1-Port Gigabit Ethernet + 2-Port Gigabit SFP Switch Media Converter

Part Number: GT-1205A Categories Ethernet over Fibre, Media Converters

Log in or Register for current pricing

Equipped with one 10/100/1000BASE-T port and dual SFP slots to support conversion between 10/100/1000BASE-T and 100/1000BASE-X network. The dual SFP slots make the Ethernet signals connect easily and efficiently by adding single-mode or multi-mode media modules or the combination of both types. With an emphasis on high reliability and flexibility, it can extend media transmission up to a distance of 550m or 2km (multi-mode fiber) and 10km or longer 20/40/80/120 kilometers (single-mode fiber or WDM fiber), depending on the optional 100/1000BASE-SX/LX SFP modules.

Key Features
Specifications
Applications

Standard

Complies with IEEE 802.3 10BASE-T
Complies with IEEE 802.3u 100BASE-TX
Complies with IEEE 802.3ab 1000BASE-T
Complies with IEEE 802.3z 1000BASE-SX/LX
IEEE 802.3x Full-duplex Flow-Control, Back-Pressure in Half-duplex eliminate packets loss

Interface

Dual 1000BASE-SX/LX SFP fiber-optic slots
One 10/100/1000BASE-T Copper, auto MDI/MDIX function
Auto-Negotiation for 10/100/1000BASE-T; Half-duplex or Full-duplex for 10Mbps and 100Mbps, Full-duplex for 1000Mbps
Supports maximum frame size up to 10K jumbo packet size
IEEE 802.1Q Tag VLAN Transparent, Multicast pass-through

Redundancy

Link status auto-detecting and redundant on Dual ports with the same connector type
Allows only the Primary-Port or the Backup-Port active at a time
– When the Primary-Port link fail occurs, the traffic swaps to Backup-Port automatically- Once the Primary-Port link regains, the traffic swaps from the Backup-Port to the Primary-Port
Hardware fiber port redundant

Mechanical

External 5V/2.5A DC power supply
LED indicators for easy network diagnose
DIP switch for 3-port operation with Gigabit switch mode or redundant mode
Compact in size, easy installation
Co-works with PLANET 10”/19” Media Converter Chassis (MC-700/MC-1500/MC-1500R/MC-1500R48)
Wall mounting and DIN-Rail installation supported

Hardware Specifications
Hardware Version	3
Ports	Copper: One 10/100/1000BASE-T port Fiber: Two 1000BASE-X SFP slots
Cable	Twisted-pair 10BASE-T: 2-pair UTP Cat3,4,5, up to 100 meters 100BASE-TX: 2-pair UTP Cat5, 5e up to 100 meters 1000BASE-T: 4-pair UTP Cat5e,6 up to 100 metersFiber-Optic Cable 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220 and 550 meters 9/125μm single-mode cable with distance of 10/15/20/30/40/50/60/70/120km or longer (may vary on SFP module)
LED Display	System: One Power LED (Green) Fiber Port: Two LNK/ACT LED (Green) TP Port: One Speed LED (Green) , One LNK/ACT LED (Orange)
Switch Processing Scheme	Store and Forward
Fabric	6Gbps
Throughput (packet per second)	4.4Mpps
Maximum Packet Size	10K Bytes
Flow Control	Back pressure for half-duplex. IEEE 802.3x pause frame for full-duplex
Power Requirements	5V DC, 2A max.
Power Consumption	4 watts/13.6BTU per hour max.
Dimensions (W x D x H)	94 x 70 x 26 mm
Weight	180g (device only)
Standard Conformance
EMI Safety	FCC Class B, CE
Operating environment	0 ~ 50 degrees C
Storage environment	-10 ~ 70 degrees C
Operating Humidity	5 ~ 95%, Relative Humidity, non-condensing
Storage Humidity	5 ~ 95%, relative humidity (non-condensing)
Standard Compliance	IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-SX/LX IEEE 802.3x Flow Control