Home>Media Converters>Ethernet over 2 Wire>VC-231 – Planet Ethernet Over VDSL2 (Twisted Pair) Converter 10/100
VC-231 – Planet Ethernet Over VDSL2 (Twisted Pair) Converter 10/100
Part Number:
VC-231
Categories Ethernet Extenders, Ethernet over 2 Wire, Media Converters
PLANET VC-231 is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers the fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-231 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections.
- Key Features
- Specifications
- Applications
- Cost-Effective VDSL2 Profile 17a/30a CO / CPE bridge solution
- One box design, CO / CPE selectable via DIP Switch
- Defines symmetric band plan for the transmission of upstream and downstream signals
- Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX and IEEE 802.3x, Flow control Ethernet standards
- DMT (Discrete Multi-Tone) line coding
- Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
- One RJ-11 connector for VDSL port with VDSL connection, additional Splitter for POST connection
- Voice and data communication can be shared simultaneously based on the existing telephone wire
- One 10/100Mbps RJ-45 port, Auto-Negotiation and Auto-MDI/MDI-X
- Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag transparent
- VDSL2 stand-alone transceiver for simple bridge modem application
- Advantage of minimum installation time (Simply as Plug-and-Play)
- Selectable target profile and target SNR margin
- Supports extensive LED indicators for network diagnosis
- Co-work with PLANET MC family Media Chassis (MC-700 / MC-1500/ MC-1500R / MC-1500R48)
- Compact in size, easy installation
Hardware Specifications | |
---|---|
Ports | 10/100Base-TX: 1 RJ-45, Auto-Negotiation and Auto-MDI/MDI-X VDSL: 1 RJ-11, female Phone Jack PHONE: Additional Splitter for POST connection |
DIP Switch & Functionality | 4 position DIP switch CO / CPE mode select Selectable fast and interleaved mode Selectable target 17a / 30a profiles Selectable target SNR mode |
Encoding | VDSL-DMT – ITU-T G.993.1 VDSL – ITU-T G.997.1 – ITU-T G.993.2 VDSL2 (Profile 17a/30a Support) |
LED Indicators | One Power 3 for RJ-11/VDSL2 2 for per RJ-45 10/100Base-TX port |
Cabling | Ethernet 10Base-T: 2-pair UTP Cat.3,4,5 up to 100m (328ft)100Base-TX: 2-pair UTP Cat.5, up to 100m (328ft) VDSL Twisted-pair telephone wires (AWG24 or better) up to 1.4km |
Performance* (Downstream / Upstream) | 17a profile 300m -> 86/65Mbps 400m -> 86/52Mbps 600m -> 81/36Mbps 800m -> 72/19Mbps 1000m -> 60/9Mbps 1200m -> 59/6Mbps 1400m -> 50/2Mbps30a profile 300m -> 100/100Mbps 400m -> 90/90Mbps 600m -> 61/40Mbps 800m -> 54/8Mbps |
Power Requirements | 5V DC, 2A |
Power Consumption | 6.6 Watts / 22 BTU |
Dimensions (W x D x H) | 97 x 70 x 26 mm |
Weight | 199g |
Environment | |
Operating | Temperature: 0 ~ 50 degrees C Relative Humidity: 10 ~ 90% (non-condensing) |
Storage | Temperature: -10 ~ 70 degrees C Relative Humidity: 10 ~ 90% (non-condensing) |
Switch Specifications | |
Switch Processing Scheme | Store-and-Forward |
Address Table | 1K entries |
Flow Control | Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex |
Switch fabric | 0.2Gbps |
Throughput (packet per second) | 0.14Mpps |
Network cables | 10/100Base-TX: 2-Pair UTP Cat. 3,4, 5 (100meters, max.) EIA / TIA-568 100-ohm STP (100meters, max.) |
Standard Conformance | |
Regulation Compliance | FCC Part 15 Class A, CE |
Standards Compliance | IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX ITU-T – G.993.1 (VDSL) – G.997.1 – G.993.2 VDSL2 (Profile 17a/30a) |
* The actual data rate will vary on the quality of the copper wire and environment factors. |
Ordering Information | |
---|---|
VC-231 | Ethernet over VDSL2 Converter (1 x RJ45, 1 x VDSL2/RJ11,17a/30a) |