Back

E10500D – Video Ground Loop Isolator (BNC (F) to BNC (M) 100 mm Tail)

73 in stock (can be backordered)

Part Number:E10500D

Log in or Register for current pricing

In installations where hum bars and interference caused by multiple ground paths affect the picture quality use of EQL Teleconnect’s high performance ground loop isolators will in most cases fix the problem. Where hum bars and general interference problems,suspected to be from grounding issues,are noted a lot of time could be saved by firstly installing a ground loop isolator between the coax feed connecting the camera to see if this problem is generated from multi-path grounding and if it is the ground loop isolator will fix the problem.

  • BNC Male with 100mm Mini Coax to BNC Female.
  • Eliminates Hum Bars caused by ground loops and interference.
  • Transient Voltage Protection
  • Exceptional performance, High Reliability and Durability
  • Housed in a fire retardant wall mountable Case
  • Impedance 75 Ohms
  • High quality and performance
  • Passive device (no power supply required)
  • Stable over working temperature between 0 oC to +55 oC
E10500D - Video Ground Loop Isolator (BNC (F) to BNC (M) 100 mm Tail)
Bandwidth: 0 to 10 MHz (-3 dB)
Insertion Loss: < 0.5 dB
Impedance: 75 ohm Nominal
Maximum Signal Voltage: 1.1 Vp-p
Cable Length: 100 mm
Isolation Voltage: 750 Volts DC
Insulation Resistance: >100M ohm
Transient Voltage Suppression: 12 Volts rms
Temperature Range: 0 to 55 oC operating, 22 to 80oC Storage, 95% Relative Humidity
Casing: Black Fire Retardant Plastic ABS UL 94V-0
Click here to open the datasheets