VF-402-KIT – Planet 4 Channel Video Over Fibre Kit

Available on backorder

Part Number:VF-402-KIT

Log in or Register for current pricing

To deploy AHD/CVI/TVI/CVBS analog camera in a remote place efficiently and provide high video quality and reliable signal, PLANET has developed the video over fiber media converter kit, VF-402-KIT, which is ideal for extending the distance and signal conversion by transmitting the video and data over fiber-optic cable. Adopting intelligent encoding/decoding technology and compact in size, the VF-402-KIT media converter enables the video to be delivered in high quality up to 20km in distance.

  • Compliant with hybrid video (AHD/TVI/CVI/CVBS)
  • 20km long-distance data transmission
  • Fiber optic transmission of four video signals on one fiber with RS485 data signals which may be one way with the video or optional duplex
  • Status indication for power supply, optical signal and video
  • High-speed synchronous digital transmission technology
  • Effective against electromagnetic interference, radio frequency interference, 6KV high-level lightning protection design
  • Guarantees safe transmission under poor electromagnetic environment
  • Maximum tolerable link loss for single mode single fiber is 0.35dB/km
  • Video bandwidth of 60MHz, SNR>67dB
  • Wide temperature range from -20 to 70 degrees C
VF-402-KIT - Planet 4 Channel Video Over Fibre Kit
Video Characteristics
Video Channel 4-channel bi-direction
Video Connector BNC
Supported Video Type 1080p: AHD/TVI/CVI
480p: CVBS
Video Input/Output Impedance 75ohm/unbalanced interface
Video Input/Output Voltage 1.0 Vpp / typical peak-to-peak value
Video Bandwidth 25 to 60MHz
Video Digital Bit Width 8/10 bit
Differential Gain (DG) < 2% (typical value)
Differential Phase (DP) < 2° (typical value)
SNR-weighted Scheme > 67dB (typical value)
Data Interface
Data Channel 4 channels
Physical Protocol RS485
Operation Mode Simplex
Data Connector 4 Pin terminal block with screw clamps
Data Rate DC-150Kbps
Data Distance RS485: 0-20km
BPS 0-115.2Kbps
Bit Error Rate (BER) < 10-9
Optical Interface
Optical Connector FC
Fiber Type Single-mode, single fiber
Distance 20km for single mode
Optical Wavelength VF-402-T
TX: 1310nm
RX: 1550nm

TX: 1550nm
RX: 1310nm

Transmitter Coupled Power Max.: 0dBm
Min.: -8dBm
Receive Sensitivity -22dBm
Link Budget From 15dB to 20dB at 1310nm or 1550nm
Cable 9/125μm single-mode cable
Hardware Specifications
LED Indicators


Each channel

Link (fiber optic)

Dimensions (W x D x H) 157 × 116.5 × 48 mm
Weight 580g
Power Requirement 5V DC, 2A
Chassis Current Consumption 1.10 amp for 4-channel video and 1-channel data
Mechanical Metal
Standards Conformance
Regulatory Compliance FCC, CE
Operating Temperature: -20 ~ 70 degrees C
Relative Humidity: 0 ~ 95% (non-condensing)
Storage Temperature: -40 ~ 85 degrees C
Relative Humidity: 0 ~ 95% (non-condensing)
Standard Accessories
Packet Contents VF-402-T x 1
VF-402-R x 1
User’s manual x 1
5V/2A power adapter x 2
Ordering Information


4-Channel Video over Fiber Bundled Kit (VF-402-T + VF-402-R)
Click here to open the datasheets