LRP-422CST – Planet Industrial 4-port Coax + 2-port 10/100/1000T + 2-port 100/1000X SFP Long Reach PoE over Coaxial Managed Switch
The LRP-422CST provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit Switching engine along with 4 BNC ports with Long Reach PoE Injector function, 2 Gigabit copper ports and 2 extra 100/1000BASE-X SFP fiber slots. Each of the BNC ports provides 36 watts of power with a total power budget of up to 150 watts.
- Key Features
- Specifications
- Applications
Physical Port
- 4 100Mbps BNC female ports with Long Reach PoE Injector function
- 2 10/100/1000BASE-T Gigabit RJ45 copper ports
- 2 100/1000BASE-X mini-GBIC/SFP slots
- RJ45 console interface for switch basic management and setup
Long Reach Power over Ethernet
- Supports PoE power up to 36 watts for each PoE port
- Remote power feeding up to 1 kilometer with 5C2V/RG6 75Ω coaxial cable
- Long Reach PoE Management
– Total Long Reach PoE power budget control
– Long Reach PoE port power feeding priority
– Per Long Reach PoE port power limitation
– Long Reach PD alive check- Long Reach PoE schedule
Industrial Case/Installation
- IP30 aluminum case protection
- DIN-rail and wall-mount design
- Redundant Power Design
– 48 to 56V DC, redundant power with polarity reverse protect function - Supports EFT protection for 6000V DC power and 6000V DC Ethernet ESD protection
- -20 to 75 degrees C operating temperature
Hardware Specifications | |||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ethernet Interfaces | ■ Copper • 2 x 10/100/1000BASE-T RJ45 • Auto-negotiation/Auto-MDI/MDI-X■ Fiber Optic • 2 x 100/1000BASE-X SFP slot • Supports 100/1000Mbps dual mode and DDM■ Jumbo Frame • 10Kbytes with GE1 to GE4 | ||||||||||||||||||||||||||||||
Long Reach PoE Interfaces | ■ Connectivity • 4 x BNC female connectors • Long Reach PoE over coaxial PSE (Power Source Equipment) – BNC center pole : DC+/Hi – BNC shield : DC -/Lo■ Power Output • Per port 48~56V DC, 36 watts (max.)■ Total Power Budget • 150 watts (max.)■ Cabling • Coaxial cable: 75 ohm • RG-6/U cable (Recommended)■ Maximum Distance • Max. 200m with PoE+ output (1,640ft.) • Max. 400m with PoE output (2,624ft.) • Max. 1200m without PoE output (3,937ft.)■ Long Reach Ethernet Standard • IEEE 1901■ Modulation Type • Wavelet-OFDM■ Security • 128-bit AES encryption ■ Frequency Band ■ Performance
* The actual data rate and PoE output vary on the quality of the copper wire and environmental factors.The performance result above is based on the testing via the RG-6/U coaxial cable. ** TX: The LRP-422CST to the LRP-101CE ■ Multiple Nodes * The actual extender nodes vary on the quality of the copper wire and environmental factors. ■ LRP Compatibility | ||||||||||||||||||||||||||||||
Console | 1 x RS232-to-RJ45 serial port (115200, 8, N, 1) | ||||||||||||||||||||||||||||||
Switch Architecture | Store-and-Forward | ||||||||||||||||||||||||||||||
Switch Fabric | 8.8Gbps/non-blocking | ||||||||||||||||||||||||||||||
Address Table | 8K entries | ||||||||||||||||||||||||||||||
Shared Data Buffer | 4.1 megabits | ||||||||||||||||||||||||||||||
Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex | ||||||||||||||||||||||||||||||
Reset Button | < 5 sec: System reboot > 5 sec: Factory default | ||||||||||||||||||||||||||||||
EST Protection | 6KV DC | ||||||||||||||||||||||||||||||
ESD Protection | 6KV DC | ||||||||||||||||||||||||||||||
Enclosure | IP30 aluminum case | ||||||||||||||||||||||||||||||
Installation | DIN-rail kit and wall-mount kit | ||||||||||||||||||||||||||||||
Connector | Removable 6-pin terminal block for power input Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 | ||||||||||||||||||||||||||||||
Alarm | One relay output for power failure. Alarm Relay current carry ability: 1A @ 24V AC | ||||||||||||||||||||||||||||||
LED | System: Power 1 (Green) Power 2 (Green) Fault Alarm (Red) Per LRP Port: LNK/ACT (Green) PoE In-use (Orange) Per Gigabit Port: LNK/ACT (Green) 1000(Orange) | ||||||||||||||||||||||||||||||
Dimensions (W x D x H) | 72 x 107 x 152 mm | ||||||||||||||||||||||||||||||
Weight | 1,150g | ||||||||||||||||||||||||||||||
Power Requirements | 48 to 56V DC | ||||||||||||||||||||||||||||||
Power Consumption | 9.5 watts/32.42 BTU (System on) 165 watts/563.0 BTU (Full loading) | ||||||||||||||||||||||||||||||
Layer 2 Functions | |||||||||||||||||||||||||||||||
Port Mirroring | TX/RX/both Many-to-1 monitor | ||||||||||||||||||||||||||||||
VLAN | 802.1Q tagged-based VLAN Up to 256 VLAN groups, out of 4094 VLAN IDs 802.1ad Q-in-Q tunneling Voice VLAN Protocol VLAN Private VLAN (Protected port) GVRP | ||||||||||||||||||||||||||||||
Link Aggregation | IEEE 802.3ad LACP and static trunk Supports 4 trunk groups with 4 ports for each group | ||||||||||||||||||||||||||||||
Spanning Tree Protocol | STP/RSTP/MSTP | ||||||||||||||||||||||||||||||
IGMP Snooping | IGMP (v2/v3) Snooping IGMP Querier Up to 256 multicast groups | ||||||||||||||||||||||||||||||
MLD Snooping | MLD (v1/v2) Snooping, up to 256 multicast groups | ||||||||||||||||||||||||||||||
Access Control List | IPv4/IPv6 IP-based ACL / MAC-based ACL | ||||||||||||||||||||||||||||||
QoS | 8 mapping IDs to 8 level priority queues – Port number – 802.1p priority – 802.1Q VLAN tag – DSCP field in IP packet Traffic classification based, strict priority and WRR | ||||||||||||||||||||||||||||||
Security | IEEE 802.1X port-based authentication Built-in RADIUS client to co-operate with RADIUS server RADIUS/TACACS+ user access authentication IP-MAC port binding MAC filter Static MAC address DHCP Snooping and DHCP Option82 STP BPDU guard, BPDU filtering and BPDU forwarding DoS attack prevention ARP inspection IP source guard | ||||||||||||||||||||||||||||||
Management Functions | |||||||||||||||||||||||||||||||
Basic Management Interfaces | Web browser/Telnet/SNMP v1, v2c Firmware upgrade by HTTP/TFTP protocol through Ethernet network Remote/Local Syslog System log LLDP protocol SNTP | ||||||||||||||||||||||||||||||
Secure Management Interfaces | SSH, SSL, SNMP v3 | ||||||||||||||||||||||||||||||
SNMP MIBs | RFC 1213 MIB-II RFC 1215 Generic Traps RFC 1493 Bridge MIB RFC 2674 Bridge MIB Extensions RFC 2737 Entity MIB (Version 2) RFC 2819 RMON (1, 2, 3, 9) RFC 2863 Interface Group MIB RFC 3635 Ethernet-like MIB | ||||||||||||||||||||||||||||||
Standards Conformance | |||||||||||||||||||||||||||||||
Regulation Compliance | FCC Part 15 Class A, CE | ||||||||||||||||||||||||||||||
Standards Compliance | IEEE 1901 Broadband Power Line IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 RFC 3810 MLD v2 | ||||||||||||||||||||||||||||||
Environment | |||||||||||||||||||||||||||||||
Operating | Temperature: -20 ~ 75 degrees C Relative Humidity: 5 ~ 95% (non-condensing) | ||||||||||||||||||||||||||||||
Storage | Temperature: -40 ~ 85 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |