LRP-101CE – Planet 1-Port Long Reach PoE over Coaxial Extender
The LRP-101CE, a PLANET Long Reach PoE solution, is a single-port 802.3at PoE+ Extender that is installed at a remote location connecting to an PoE IP camera or PoE wireless AP. The LRP-101CE has to work with PLANET single-port Long Reach PoE Injector or Multiple-channel Long Reach PoE Switch to be able to simultaneously transmit both data and power to a PD over a distance of up to 1,000m (3,280ft) over coaxial cable.
- Key Features
- Specifications
- Applications
Physical Port
- 1 x 10/100BASE-TX RJ45 copper interface, supporting IEEE 802.3af/at PoE PSE
- 1 x BNC connector, supporting 44~56V DC power input and Ethernet data transmission
Power over Ethernet
- Supports Power over Ethernet PSE, PoE Injector
- Eliminates power cabling with PoE over Coaxial
- Power and Ethernet data transmission over coaxial up to 1km
- Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet PSE on RJ45 port
- Supports PoE power up to 25 watts (depending on Power Source and Coaxial Distance)
- Auto detects remote powered device (PD)
Industrial Case / Installation
- Supports extensive LED indicators for network diagnostics
- Metal case protection
- Compact size, DIN-rail and wall-mount design
- Power Input: PoC (Power over Coaxial) power input
- Supports 4KV DC Ethernet ESD protection
- -20 to 70 degrees C operating temperature
Hardware Specifications | |||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ethernet Interface | ■ Copper: • 10/100BASE-TX RJ45 • auto-negotiation/ auto-MDI/MDI-X■ Power over Ethernet Standard: IEEE 802.3at/af PoE PSE (Power Source Equipment)■ PoE Output: 56V DC, 600mA max.■ PoE Budget: Up to 25 watts■ PoE Mode: End-span, RJ45 Pin 1/2(+), 3/6(-)■ Data Rate: 100/100Mbps ■ Cabling: Cat5e or above ■ Maximum Distance: 100 meters ■ Maximum Frame Size: 1522bytes | ||||||||||||||||||||||||||
Long Reach PoE Interface | ■ Connectivity: • 1 x BNC female • Long Reach PoE over coaxial PD (Powered Device)■ Power Input: 37~56V DC*■ Power Pin Assignment: • BNC center pole : DC+ / Hi • BNC shield : DC – / Lo■ Cabling: • Coaxial cable: 75 ohm • RG-6/U cable, less than 12Ω/1,000ft. • RG-59/U cable, less than 30Ω/1,000ft.■ Maximum Distance: • Max. 200m with PoE+ output (656ft.) • Max. 600m with PoE output (1,968ft.) • Max. 1,200m without PoE output (3,937ft.)■ Long Reach Ethernet Standard: IEEE 1901 ■ Modulation Type: Wavelet-OFDM ■ Security: 128-bit AES encryption ■ Frequency Band: 2 ~ 28 MHz ■ Encryption: AES 128-bit ■ Performance**
■ Multiple Nodes: Supports up to 4 LRP extenders within 1km ■ LRP Compatibility: | ||||||||||||||||||||||||||
LED Indicators | 4 x LEDs ■ PWR ■ LRP LNK ■ PoE-in-use ■ LNK/ACT | ||||||||||||||||||||||||||
ESD Protection | 4KV DC | ||||||||||||||||||||||||||
Enclosure | Metal case | ||||||||||||||||||||||||||
Installation | Wall mount or DIN rail with optional kit | ||||||||||||||||||||||||||
Dimensions (W x D x H) | 94 x 70 x 26 mm | ||||||||||||||||||||||||||
Weight | 375g | ||||||||||||||||||||||||||
Power Requirements | BNC Power over Coaxial Input: 44~56V DC | ||||||||||||||||||||||||||
Standards Conformance | |||||||||||||||||||||||||||
Standards Compliance | IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af Power over Ethernet (802.3at Type 1) IEEE 802.3at Power over Ethernet Plus(802.3at Type 2) | ||||||||||||||||||||||||||
Regulation Compliance | FCC Part 15 Class A, CE | ||||||||||||||||||||||||||
Environment | |||||||||||||||||||||||||||
Temperature | Operating: -20~70 degrees C Storage: -40~75 degrees C | ||||||||||||||||||||||||||
Humidity | Operating: 5~95% (Non-condensing) Storage: 5~95% (Non-condensing) |