IGS-500T – Planet 5-Port Gigabit Industrial Ethernet Switch
Part Number:
IGS-500T
Categories Industrial, Network Switches, Network Switches, Switches
The IGS-500T is suitable for industrial use and features 5, 1000Mbps auto-negotiation ports, encased in an IP30-rated compact housing and a wide-ranging redundant power system (12~48V DC or 24V AC). The IGS-500T is able to operate in any harsh environment with operating temperatures ranging from -40 to 75 degrees C.
- Key Features
- Specifications
- Applications
Physical Port
- 5-port 10/100/1000BASE-T RJ45 with auto-MDI/MDI-X function
Layer 2 Features
- Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T Ethernet standard
- Supports auto-negotiation and 10/100Mbps half/full duplex and 1000Mbps full duplex
- Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
- High-performance Store and Forward architecture, broadcast storm control and runt/CRC filtering eliminate erroneous packets to optimize the network bandwidth
- Backplane (switching fabric): 10Gbps
- Integrated address look-up engine, supporting 4K absolute MAC addresses
- 9K jumbo packet size
- Automatic address learning and address aging
- CSMA/CD Protocol
Industrial Case and Installation
- IP30 metal case
- DIN rail and wall-mount design
- 12 to 48V DC, redundant power with polarity reverse protect function and connective, removable terminal block for master and slave power; 24V AC power support
- Supports 6000 VDC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
- Free fall, shock-proof and vibration-proof for industries
Hardware Specifications | |
---|---|
Copper Ports | 5 x 10/100/1000BASET RJ45 TP auto-MDI/MDI-X, auto negotiation |
Connector | Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 |
Alarm | Provides one relay output for power failure Alarm relay current carry ability: 1A@DC 24V |
LED | 3 x LED for system and power: ■ Green: DC Power 1 ■ Green: DC Power 2 ■ Red: Power Fault 2 x LED for each copper port ■ Green: 1000Mbps LNK/ACT ■ Orange: 10/100Mbps LNK/ACT |
ESD Protection | 6KV |
EFT Protection | 6KV |
Power Requirements | 12~48V DC, redundant power with polarity reverse protection function, 24V AC power support |
Power Consumption / Dissipation | 3.6 watts/12.35BTU |
Installation | DIN-rail kit and wall-mount ear |
Enclosure | IP30 metal case |
Dimensions (W x D x H) | 30 x 70 x 104 mm |
Weight | 252g |
Switch Specifications | |
Switch Processing Scheme | Store-and-Forward |
Address Table | 4K entries |
Buffer Memory | 1M bits on-chip buffer memory |
Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
Switch Fabric | 10Gbps |
Throughput (packet per second) | 7.4Mpps@64bytes |
Jumbo Frame | 9K |
Network Cables | 10/100/1000BASE-T Cat. 3, 4, 5, 5e, 6 UTP cable (max. 100 meters) EIA/TIA-568 100-ohm STP (max. 100 meters) |
Standards Conformance | |
Standards Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.1p Class of Service |
Regulatory Compliance | FCC Part 15 Class A, CE |
Stability Testing | IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) |
Environment | |
Temperature | Operating: -40~75 degrees C Storage: -40~75 degrees C |
Humidity | Operating: 5~90%, Storage: 5~90% (non-condensing) |
Ordering Information | |
---|---|
IGS-500T | Compact Industrial 5-Port 10/100/1000T Gigabit Ethernet Switch (-40~75 degrees C operating temperature) |
