Categories

IGS-4215-4P4T2S Planet 4-Port Gigabit Industrial 30W PoE Managed with 4-Port Ethernet + 2-Port SFP Switch

Part Number: IGS-4215-4P4T2S Categories , , , , ,

IP30 Industrial L2/L4 4-Port 10/100/1000T 802.3at PoE + 4-Port 10/100/100T + 2-Port 100/1000X SFP Managed Switch (-40~75 degrees C), dual redundant power input on 48~56VDC terminal block, SNMPv3, 802.1Q VLAN, IGMP Snooping, SSL, SSH, ACL

Physical Port

  • 8-port 10/100/1000BASE-T Gigabit RJ45 copper with 4-port IEEE 802.3at/af PoE Injector (Port-1 to Port-4)
  • 2 100/1000BASE-X mini-GBIC/SFP slots, SFP type auto detection
  • RJ45 console interface for switch basic management and setup

Power over Ethernet

  • Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 4 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE management
    – Total PoE power budget control- Per port PoE function enable/disable- PoE port power feeding priority- Per PoE port power limitation- PD classification detection- PD alive-check- PoE schedule Industrial Case & Installation
  • IP30 aluminum case
  • DIN-rail and wall-mount design
  • Supports -40 to 75 degrees C operating temperature
  • Supports ESD 6KV DC Ethernet protection
  • Redundant power design
    – 48V~56V DC wide power input with reverse polarity protection
  • Provides one relay output for power failure

Switching

  • Hardware based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI/MDI-X
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • 8K MAC address table size
  • 10K jumbo frame
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol
    Provides one relay output for power failure Layer 2 Features
  • Supports VLAN
    – IEEE 802.1Q tagged VLAN
    – Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support
    – Protocol VLAN
    – Voice VLAN
    – Private VLAN (Protected port)
    – Management VLAN- GVRP
  • Supports Spanning Tree Protocol
    – STP (Spanning Tree Protocol)
    – RSTP (Rapid Spanning Tree Protocol)
    – MSTP (Multiple Spanning Tree Protocol)
    – STP BPDU Guard, BPDU Filtering and BPDU Forwarding
  • Supports Link Aggregation
    – IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    – Cisco ether-channel (static trunk)
    – Maximum 4 trunk groups, up to 4 ports per trunk group
  • Provides port mirror (many-to-1)
  • Loop protection to avoid broadcast loops

Quality of Service

  • Ingress/Egress Rate Limit per port bandwidth control
  • Traffic classification
    – IEEE 802.1p CoS- TOS/DSCP/IP precedence of IPv4/IPv6 packets
  • Strict priority and Weighted Round Robin (WRR) CoS policies

Multicast

  • Supports IPv4 IGMP snooping v2, v3
  • Supports IPv6 MLD snooping v1, v2
  • IGMP querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering

Security

  • Storm Control support
    – Broadcast/unknown unicast/unknown multicast
  • Authentication
    – IEEE 802.1X port-based network access authentication
    – Built-in RADIUS client to cooperate with the RADIUS servers
    – DHCP Option 82
    – RADIUS/TACACS+ authentication
  • Access Control List
    – IPv4/IPv6 IP-based ACL
    – IPv4/IPv6 IP-based ACE
    – MAC-based ACL
    – MAC-based ACE
  • MAC Security
    – Static MAC
    – MAC filtering
  • Port security for source MAC address entries filtering
  • DHCP snooping to filter distrusted DHCP messages
  • Dynamic ARP inspection discards ARP packets with invalid MAC address to IP address binding
  • IP source guard prevents IP spoofing attacks
  • DoS attack prevention

Management

  • IPv4 and IPv6 dual stack management
  • Switch Management Interface
    – IPv4/IPv6 Web switch management
    – Console and telnet Command Line Interface
    – SNMP v1, v2c, v3- SSH and SSL secure access
  • User privilege levels control
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • Static and DHCP for IP address assignment
  • System Maintenance
    – Firmware upload/download via HTTP/TFTP
    – Configuration upload/download through HTTP/TFTP
    – Hardware reset button for system reboot or reset to factory default
    – Dual images
  • SNTP Network Time Protocol
  • Cable diagnostics
  • Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
  • SNMP trap for interface Link Up and Link Down notification
  • Event message logging to remote syslog server
  • Four RMON groups (history, statistics, alarms and events)
  • PLANET Smart Discovery Utility
Hardware Specifications
Copper Ports8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots2 1000BASE-SX/LX/BX SFP interfaces (Port-9 and Port-10) Compatible with 100BASE-FX SFP
PoE Injector Port4 ports with 802.3af/802.3at PoE injector function (Port-1 to Port-4)
Console1 x RS232-to-RJ45 serial port (115200,8, N, 1)
Switch ArchitectureStore-and-Forward
Switch Fabric20Gbps/non-blocking
Switch Throughput@64 bytes14.8Mpps @64 bytes
MAC Address Table8K entries
Shared Data Buffer4.1 megabits
Flow ControlIEEE 802.3x pause frame for full-duplex Back pressure for half-duplex
Jumbo Frame10 Kbytes
Reset Button< 5 sec: System reboot > 5 sec: Factory default
LED3 x LED for System and Power: ■ Green: DC Power 1 ■ Green: DC Power 2 ■ Red: Power Fault 2 x LED for PoE Copper Port (Port-1~Port-4): ■ Green: LNK/ACT ■ Orange: PoE-in-use 2 x LED for 10/100/1000T Copper Port (Port-5~Port-8): ■ Green: LNK/ACT ■ Orange: 1000Mbps 2 x LED for per mini-GBIC interface (Port-9 and Port-10) ■ Green: LNK/ACT ■ Orange: 1000Mbps 4 x LED for PoE Power Usage (W) ■ Orange: 30, 60, 90 and 120W
ConnectorRemovable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
AlarmOne relay output for power failure. Alarm relay current carry ability: 1A @ 24V AC
Power Requirements48~56V DC, 3.5A (max.)
Power Consumption/ Dissipation5.04 watts, 17.1BTU (Standby without PoE function) 8.96 watts, 30.5 BTU (Full loading without PoE function) 152.96 watts, 521.8 BTU (Full loading with PoE function)
Dimensions (W x D x H)161 x 107 x 72 mm
Weight1004g
ESD Protection6KV DC
EnclosureIP30 aluminum case
InstallationDIN-rail kit and wall-mount ear
Power over Ethernet
PoE StandardIEEE 802.3af/802.3at Power over Ethernet PSE
PoE Power Supply TypeEnd-span
PoE Power OutputIEEE 802.3af Standard – Per port 48V~56V DC (depending on the power supply), max. 15.4 watts IEEE 802.3at Standard – Per port 50V~56V DC (depending on the power supply), max. 36 watts
Power Pin Assignment1/2(+), 3/6(-)
PoE Power Budget144 watts (depending on power input)
Max. Number of Class 2 PDs4
Max. Number of Class 3 PDs4
Max. Number of Class 4 PDs4
Layer 2 Functions
Port MirroringTX/RX/Both Many-to-1 monitor
VLAN802.1Q tagged-based VLAN Up to 256 VLAN groups, out of 4094 VLAN IDs 802.1ad Q-in-Q tunneling (VLAN stacking) Voice VLAN Protocol VLAN Private VLAN (Protected port) GVRP Management VLAN
Link AggregationIEEE 802.3ad LACP and static trunk Supports 4 groups with 4 ports per trunk
Spanning Tree ProtocolIEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) STP BPDU Guard, BPDU Filtering and BPDU Forwarding
IGMP SnoopingIPv4 IGMP snooping v2, v3 IGMP querier Up to 256 multicast groups
MLD SnoopingIPv6 MLD snooping v2, v3, up to 256 multicast groups
Access Control ListIPv4/IPv6 IP-based ACL/MAC-based ACL IPv4/IPv6 IP-based ACE/MAC-based ACE
QoS8 mapping IDs to 8 level priority queues – Port number – 802.1p priority – DSCP/IP precedence of IPv4/IPv6 packets Traffic classification based, strict priority and WRR Ingress/Egress Rate Limit per port bandwidth control
SecurityIEEE 802.1X port-based authentication Built-in RADIUS client to cooperate with RADIUS server RADIUS/TACACS+ authentication IP-MAC port binding MAC filtering Static MAC address DHCP snooping and DHCP Option82 STP BPDU guard, BPDU filtering and BPDU forwarding DoS attack prevention ARP inspection IP source guard Storm control support – Broadcast/unknown unicast/unknown multicast
Management Functions
Basic Management InterfacesWeb browser, Console,Telnet, SNMP v1, v2c, v3 Firmware upgrade by HTTP/TFTP protocol through Ethernet network Configuration upload/download through HTTP/TFTP Remote/local syslog System log LLDP protocol SNTP PLANET Smart Discovery Utility
Secure Management InterfacesSSH, SSL, SNMP v3
SNMP MIBsRFC 1213 MIB-II RFC 1215 Generic Traps RFC 1493 Bridge MIB RFC 2674 Bridge MIB Extensions RFC 2737 Entity MIB v2 RFC 2819 RMON (1, 2, 3, 9) RFC 2863 Interface Group MIB RFC 3635 Ethernet-like MIB
Standards Conformance
Regulatory ComplianceFCC Part 15 Class A, CE
Stability TestingIEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration)
Standards ComplianceIEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3x Flow Control and Back Pressure IEEE 802.3ad Port Trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN Tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 RFC 3810 MLD v2
Environment
OperatingTemperature: -40 ~ 75 degrees C Relative Humidity: 5 ~ 95% (non-condensing)
StorageTemperature: -40 ~ 85 degrees C Relative Humidity: 5 ~ 95% (non-condensing)