Categories
BSP-115HP-5A – Planet 5-Port Hybrid PoE Solar PoE Switch with 1-Port 1000X SFP
PLANET BSP-115HP-5A Solar PoE Switch is a solar-powered network switch that incorporates environmental, social and governance (ESG) principles. It can be charged by the inexhaustible and natural source of energy, such as solar, wind and hydroelectric power to conserve energy so as to economically power these remote IP cameras and wireless APs. The BSP-115HP-5A is equipped with 5 10/100/1000BASE-T copper ports. Port 1 supports 60-watt PoE and ports 2 to 5 support 802.3at PoE+ injector function. Besides, ports 4 to 5 also provide passive 24V/48V options. Using 24V PoE equipment will improve energy efficiency. When powered by a 24V battery, there is no need to go through the loss of lifting. A total PoE power budget of up to 65 watts and 1 extra 100/1000BASE-X SFP fibre port are especially used for such expansive applications as dams, forests, deserts, national parks, nature/animal protection areas and highways.
| Hardware Specifications | |
|---|---|
| Copper Ports | 5 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
| SFP Port | 1 100/1000BASE-X SFP port |
| Connector | Removable 6-pin terminal block Pin 1/2(+/-) for PV panel Pin 3/4(+/-) for DC Power Pin 5/6(-/+) for battery charging and discharging |
| DIP Switch | Front Panel: Alive Check: All PoE ports enable PD Alive check function. VLAN: Port isolation Extend: Long distance PoE switch. P4: PoE 24V/48V switch P5: PoE 24V/48V switchRear Panel: PWR: Equipment power switch BAT: Battery type switch BV: Battery voltage switch LiFe: Lithium iron phosphate switch |
| Power Requirements | Supports 15-27V solar panel input (open circuit voltage) with 12V battery, maximum solar panel input power of 135W, and maximum circuit 5A. Supports 32-45V solar panel input (open circuit voltage) with 24V battery, maximum solar panel input power of 225W, and maximum circuit 5A. Supports 15~24V DC input with 12V battery. Supports 32~36V DC input with 24V battery |
| Charging Function | Integrated automatic charging and discharging, maximum efficiency 98%, maximum charging current 5A Integrated battery protection function Integrated battery float charging function Supports over-temperature protection function |
| Battery Type | Based on full loading of power consumption: 12V / 24V lead-acid battery, recommended capacity 290AH, maximum charging current 5A 12.6V/25. 2V lithium battery, recommended capacity 290AH, maximum charging current 5A 14.6V/29.2V lithium iron battery, recommended capacity 290AH, maximum charging current 5A Note: Recommended capacity 290AH in fully power 65W usage |
| Power Consumption/ Dissipation | 3.36 watts, 11.5BTU (Standby without PoE function) 75.6 watts, 257.8 BTU (Full loading with PoE function) |
| Dimensions (W x D x H) | 142mm*159mm*34mm |
| Weight | 690g |
| ESD Protection | ±8KV air gap discharge ±4KV contact discharge |
| Temperature Sensor | Temperature Detector -20 ~ 100 degrees C |
| Surge Immunity | 2KV |
| Enclosure | IP30 metal case |
| Installation | Desktop/Wall-mount ear |
| LED Indicators | Front Panel: System: Green: PWR , BAT. out, BAT. in Per 10/100/1000T RJ45 Port: (Port 1~Port 3): Green: LNK/ACT (10/100/1000Mbps) Amber: PoE-in-use Per 10/100/1000T RJ45 Port: (Port 4~Port 5): Green: LNK/ACT (10/100/1000Mbps) Amber: 1000Mbps Green: 24V PoE-in-use Green: 48V PoE-in-use Per SFP Port: (Port 6): Green: LNK/ACT (100/1000Mbps)Rear Panel: System: Green: SYS, PWR, PV in Battery: Green: BAT. out, BAT. in, DC in |
| Switching Specifications | |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 12Gbps/non-blocking |
| Switch Throughput | 8.92Mpps@64 bytes |
| MAC Address Table | 2K entries |
| Shared Data Buffer | 2.5Mb |
| Jumbo Frame | 10K bytes |
| Power over Ethernet | |
| PoE Standard | IEEE 802.3af/802.3at/802.3bt Power over Ethernet PSE |
| PoE Power Supply Type | End-span |
| PoE Power Output | Port 1: 48V DC, max. 60 watts Ports 2 to 3: 48V DC, max. 35 watts Ports 4 to 5: 24V DC, max. 25 watts or 48V DC, max. 35 watts |
| Power Pin Assignment | Port 1: 1/2 (+), 3/6 (-), 4/5(+), 7/8(-) Port 2~5: 1/2 (+), 3/6 (-) Port 4~5 24V: Passive 4/5(+), 7/8(-) |
| PoE Power Budget | Maximum 65W (depending on power input) |
| Standards Conformance | |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Standards Compliance | IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3z Gigabit SX/LX IEEE 802.3x Flow Control and Back Pressure IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt Power over Ethernet Plus Plus IEEE 802.3az Energy-Efficient Ethernet |
| Environment | |
| Operating | Temperature: -20 ~ 65 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
| Storage | Temperature: -40 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
