VF-402-KIT – Planet 4 Channel Video Over Fibre Kit
To deploy AHD/CVI/TVI/CVBS analog camera in a remote place efficiently and provide high video quality and reliable signal, PLANET has developed the video over fiber media converter kit, VF-402-KIT, which is ideal for extending the distance and signal conversion by transmitting the video and data over fiber-optic cable. Adopting intelligent encoding/decoding technology and compact in size, the VF-402-KIT media converter enables the video to be delivered in high quality up to 20km in distance.
- Key Features
- Specifications
- Applications
- Compliant with hybrid video (AHD/TVI/CVI/CVBS)
- 20km long-distance data transmission
- Fiber optic transmission of four video signals on one fiber with RS485 data signals which may be one way with the video or optional duplex
- Status indication for power supply, optical signal and video
- High-speed synchronous digital transmission technology
- Effective against electromagnetic interference, radio frequency interference, 6KV high-level lightning protection design
- Guarantees safe transmission under poor electromagnetic environment
- Maximum tolerable link loss for single mode single fiber is 0.35dB/km
- Video bandwidth of 60MHz, SNR>67dB
- Wide temperature range from -20 to 70 degrees C
| Video Characteristics | |
|---|---|
| Video Channel | 4-channel bi-direction |
| Video Connector | BNC |
| Supported Video Type | 1080p: AHD/TVI/CVI 480p: CVBS |
| Video Input/Output Impedance | 75ohm/unbalanced interface |
| Video Input/Output Voltage | 1.0 Vpp / typical peak-to-peak value |
| Video Bandwidth | 25 to 60MHz |
| Video Digital Bit Width | 8/10 bit |
| Differential Gain (DG) | < 2% (typical value) |
| Differential Phase (DP) | < 2° (typical value) |
| SNR-weighted Scheme | > 67dB (typical value) |
| Data Interface | |
| Data Channel | 4 channels |
| Physical Protocol | RS485 |
| Operation Mode | Simplex |
| Data Connector | 4 Pin terminal block with screw clamps |
| Data Rate | DC-150Kbps |
| Data Distance | RS485: 0-20km |
| BPS | 0-115.2Kbps |
| Bit Error Rate (BER) | < 10-9 |
| Optical Interface | |
| Optical Connector | FC |
| Fiber Type | Single-mode, single fiber |
| Distance | 20km for single mode |
| Optical Wavelength | VF-402-T TX: 1310nm RX: 1550nmVF-402-R TX: 1550nm RX: 1310nm |
| Transmitter Coupled Power | Max.: 0dBm Min.: -8dBm |
| Receive Sensitivity | -22dBm |
| Link Budget | From 15dB to 20dB at 1310nm or 1550nm |
| Cable | 9/125μm single-mode cable |
| Hardware Specifications | |
| LED Indicators | Power Each channel Link (fiber optic) |
| Dimensions (W x D x H) | 157 × 116.5 × 48 mm |
| Weight | 580g |
| Power Requirement | 5V DC, 2A |
| Chassis Current Consumption | 1.10 amp for 4-channel video and 1-channel data |
| Mechanical | Metal |
| Standards Conformance | |
| Regulatory Compliance | FCC, CE |
| Environment | |
| Operating | Temperature: -20 ~ 70 degrees C Relative Humidity: 0 ~ 95% (non-condensing) |
| Storage | Temperature: -40 ~ 85 degrees C Relative Humidity: 0 ~ 95% (non-condensing) |
| Standard Accessories | |
| Packet Contents | VF-402-T x 1 VF-402-R x 1 User’s manual x 1 5V/2A power adapter x 2 |
| Ordering Information | |
|---|---|
VF-402-KIT | 4-Channel Video over Fiber Bundled Kit (VF-402-T + VF-402-R) |








