Categories
IGS-5227-6MT-X – Planet Industrial IP67-rated 6-Port 10/100/1000T M12 Managed Ethernet Switch (X-coded M12)
The IGS-12040MT is a fully-managed Gigabit fiber switch usually designed for the industrial network. It features 8 10/100/1000BASE-T copper ports, 2 100/1000BASE-X SFP ports, 2 100/1000/2500BASE-X SFP ports and redundant power system in an IP30 rugged but compact-sized case that can be installed in any difficult environment without space limitation. It provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions and Layer 3 static routing capability.
Physical Port
- 6-port 10/100/1000BASE-T, waterproof and dustproof M12 X-coded female connectors
Hardware Conformance
- IP67-rated aluminum case
- Redundant power design
– 9 to 48V DC, redundant power with polarity reverse protect function
- – Active-active redundant power failure protection
- – Backup of catastrophic power failure on one supply
- – Fault tolerance and resilience
- DIN-rail and wall-mount design
- Supports 6000V DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
Layer 3 IP Routing Features
- Supports maximum 32 static routes and route summarization
Layer 2 Features
- Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
- High performance of Store-and-Forward architecture, and runt/CRC filtering that eliminates erroneous packets to optimize the network bandwidth
- Storm control support
- Supports VLAN
– Broadcast/Multicast/Unicast
– IEEE 802.1Q tagged VLAN
- – Up to 255 VLANs groups, out of 4095 VLAN IDs
- – Provides Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- – Private VLAN Edge (PVE)
- – Protocol-based VLAN
- – MAC-based VLAN
- – IP subnet-based VLAN
- – Voice VLAN
- Supports Spanning Tree Protocol
– IEEE 802.1D Spanning Tree Protocol (STP)
- – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
- – BPDU Guard
- Supports Link Aggregation
– 802.3ad Link Aggregation Control Protocol (LACP)
- – Cisco ether-channel (static trunk)
- – Maximum 3 trunk groups, with 6 ports for each trunk
- – Up to 12Gbps bandwidth (full duplex mode)
- Provides port mirror (many-to-1)
- Port mirroring monitors the incoming or outgoing traffic on a particular port
- Loop protection to avoid broadcast loops
- Supports ITU-T G.8032 ERPS (Ethernet Ring Protection Switching)
Quality of Service
- Ingress shaper and egress rate limit per port bandwidth control
- 8 priority queues on all switch ports
- Traffic classification
– IEEE 802.1p CoS
- – ToS/DSCP/IP precedence of IPv4/IPv6 packets
- – IP TCP/UDP port number
- – Typical network application
- Strict priority and Weighted Round Robin (WRR) CoS policies
- Traffic-policing policies on the switch port
- DSCP remarking
Multicast
- Supports IGMP snooping v1, v2 and v3
- Supports MLD snooping v1 and v2
- Querier mode support
- IGMP snooping port filtering
- MLD snooping port filtering
- MVR (Multicast VLAN Registration)
Security
- Authentication
– IEEE 802.1x port-based/MAC-based network access authentication
- – IEEE 802.1x authentication with guest VLAN
- – Built-in RADIUS client to cooperate with the RADIUS servers
- – RADIUS/TACACS+ users access authentication
- Access Control List
– IP-based Access Control List (ACL)
- – MAC-based Access Control List (ACL)
- Source MAC/IP address binding
- DHCP Snooping to filter distrusted DHCP messages
- Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
- IP Source Guard prevents IP spoofing attacks
- IP address access management to prevent unauthorized intruder
Management
- IPv4 and IPv6 dual stack management
- Switch Management Interfaces
– Telnet command line interface
- – Web switch management
- – SNMP v1, v2c, and v3 switch management
- – SSH/SSL secure access
- IPv6 address/NTP management
- Built-in Trivial File Transfer Protocol (TFTP) client
- BOOTP and DHCP for IP address assignment
- System Maintenance
– Firmware upload/download via HTTP/TFTP
- – Dual images
- DHCP relay and option 82
- User privilege levels control
- NTP (Network Time Protocol)
- Link Layer Discovery Protocol (LLDP) and LLDP-MED
- Network diagnostic
– Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
- – ICMPv6/ICMPv4 remote ping
- SMTP/Syslog remote alarm
- Four RMON groups (history, statistics, alarms and events)
- SNMP trap for interface link up and link down notification
- System Log
- PLANET Smart Discovery Utility for deployment management
