WI-TEK AP218AX-Lite – Ultra Fast Wi-Fi 6 Wireless Indoor Ceiling Mount Access Point

Part Number: WI-AP218AX-Lite Categories ,

The WI-TEK AP218AX-Lite is a high-performance Wi-Fi 6 AP for indoor large-area Wi-Fi coverage scenarios. The device supports 802.3af PoE and a 12V DC local power supply. It supports MU-MIMO dual-stream technology and offers built-in omnidirectional antennas. Support AP controller and cloud management.

> 1800Mbps Wireless Ceiling Mount Access Point
> 2 Gigabit Ethernet ports
> 574Mbps at 2.4GHz + 1201Mbps at 5GHz
> Support fast roaming technology
> Support Fit/Fat working mode
> Support AP controller and cloud management

Hardware Specifications
Wireless StandardsIEEE 802.11ax/ac wave2/wave1/n/b/g/a
Operating Bands2.4GHz & 5GHz
Antenna2.4GHz:4.6dBi, 5GHz: 4dBi
Spatial Steams2.4GHz: 2×2 MIMO  5GHz: 2×2 MIMO
Signal RateUp to 574Mbps at 2.4GHz

Up to 1201Mbps at 5GHz

Receiver Sensitivity2.4GHz

802.11b:  -85dBm@11M  -92dBm@1M

802.11g:  -72dBm@54M  -90dBm@6M

802.11n HT20: -70dBm@MCS7  -88dBm@MCS0

802.11n HT40: -68dBm@MCS7  -86dBm@MCS0

802.11ax HT20:-60dBm@MCS11  -85dBm@MCS0

802.11ax HT40: -56dBm@MCS11 -85dBm@MCS0


802.11a: -72dBm@54M  -92dBm@6M

802.11n HT20: -70dBm@MCS7  -90dBm@MCS0

802.11n HT40: -68dBm@MCS7  -88dBm@MCS0

802.11ac HT20: -70dBm@MCS7  -90dBm@MCS0

802.11ac HT40: -68dBm@MCS7  -88dBm@MCS0

802.11ac HT80: -58dBm@MCS9  -85dBm@MCS0

802.11ax HT20: -62dBm@MCS11  -88dBm@MCS0

802.11ax HT40: -58dBm@MCS11  -86dBm@MCS0

802.11ax HT80: -55dBm@MCS11  -84dBm@MCS0

Maximum Transmit Power≤22dbm
Interface(2)10/100/1000M Base-T Ethernet ports
Power SupplyDC 12V/1.5A (Not Included)

802.3af PoE Supported

Power Consumption< 15W
InstallationWall/Ceiling mounting
External Buttonsreset button (long press for 8 seconds to restore the factory default configuration)
Dimensions188mm * 188mm * 35mm
EnvironmentOperating Temperature: -40°C~55°C

Storage Temperature: -40°C~70°C

Operating Humidity: 5% ~ 95% (non-condensing)

Storage Humidity: 5% ~ 95% (non-condensing)

Software Features
Operating ModeFit AP, Fat AP
Wireless FunctionsUp to 16 SSIDs
Support SSID hiding, enable/disable wireless radio
Manual and automatic channel assignment
Manual and automatic bandwidth assignment
TxPower control
RoamingSupport Layer 2  roaming
Wireless SecurityCaptive portal authentication

Static blacklist and whitelist

Wireless isolation between clients

SSID to VLAN mapping

Support 802.1X


Internet Connection TypeSupport static IP, DHCP, PPPoE Dial Up
ManagementSupport local management with web

Support centralized management with AC

Support remote management with Wi-Tek cloud platform

Platform Management


Automatic RF adjustment via the platform

Unified configuration via the platform

Unified monitoring via the platform