WGS-5225-8P2S – Planet Industrial 8-Port 30W PoE Flat Type Network Switch with 2 Port SFP

Physical Port

• 8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector
• 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
• Up to 8 IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m
• PoE management features
  – Total PoE power budget control
  – Per port PoE function enable/disable
  – PoE admin-mode control
  – PoE port power feeding priority
  – Per PoE port power limit
  – PD classification detection
• Intelligent PoE features
  – Temperature threshold control
  – PoE usage threshold control
  – PD alive check
  – PoE schedule

Industrial Case and Installation

• • Compact size with fixed wall-mounted, magnetic wall-mounted or DIN-rail design
  • IP30 metal case
  • Supports -40 to 75 degrees C operating temperature
  • Supports ESD 6KV DC Ethernet protection
  • Dual power input design
    – 48V~56V DC wide power input with polarity reverse protect function

– 3-pin terminal block or DC jack connector

Layer 2 Features

• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Storm Control support
  – Broadcast/Multicast/Unicast
• Supports VLAN
  – IEEE 802.1Q tagged VLAN
  – Up to 255 VLANs groups, out of 4094 VLAN IDs
  – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
  – Private VLAN Edge (PVE)
  – Protocol-based VLAN
  – MAC-based VLAN
  – Voice VLAN
• Supports Spanning Tree Protocol
  – IEEE 802.1D Spanning Tree Protocol (STP)
  – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
  – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
  – BPDU Guard
• Supports Link Aggregation
  – 802.3ad Link Aggregation Control Protocol (LACP)
  – Cisco ether-channel (static trunk)
  – Maximum 2 trunk groups with 2 ports per trunk group
  – Up to 2Gbps bandwidth (duplex mode)
• Provides port mirror (1-to-1)
• Port mirroring to monitor the incoming or outgoing traffic on a particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)

Layer 3 IP Routing Features

• Supports maximum 32 static routes and route summarization

Quality of Service

• Ingress Shaper and Egress Rate Limit per port bandwidth control
• 8 priority queues on all switch ports
• Traffic classification
  – IEEE 802.1p CoS
  – IP TOS/DSCP/IP precedence
  – IP TCP/UDP port number
  – Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic-policing on the switch port
• DSCP remarking

Multicast

• Supports IGMP snooping v1, v2 and v3
• Supports MLD snooping v1 and v2
• Querier mode support
• IGMP snooping port filtering
• MLD snooping port filtering
• MVR (Multicast VLAN Registration)

Security

• IEEE 802.1x Port-based/MAC-based network access authentication
• Built-in RADIUS client to cooperate with the RADIUS servers
• TACACS+ login users access authentication
• RADIUS/TACACS+ users access authentication
• IP-based Access Control List (ACL)
• MAC-based Access Control List
• Source MAC/IP address binding
• DHCP snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized intruder

Management

• Switch Management Interfaces
  – Telnet Command Line Interface
  – Web switch management
  – SNMP v1 and v2c switch management
  – SSH/SSL and SNMP v3 secure access
• Four RMON groups (history, statistics, alarms, and events)
• IPv6 IP address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• Firmware upload/download via HTTP/TFTP
• DHCP Relay and DHCP Option 82
• User Privilege levels control
• Network Time Protocol (NTP)
• Link Layer Discovery Protocol (LLDP)
• SFP-DDM (Digital Diagnostic Monitor)
• Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
• Reset button for system reboot or reset to factory default
• PLANET Smart Discovery Utility for deployment management