WGS-4215-16P2S – Planet Industrial 16-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mounted Managed Switch

Physical Port

• 16-Port 10/100/1000BASE-T Gigabit RJ45 copper with IEEE 802.3at PoE+ Injector function
• 2 100/1000BASE-X mini-GBIC/SFP slots

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
• Backward compatible with IEEE 802.3af Power over Ethernet
• Up to 16 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters in standard mode and 250m in extend mode
• PoE management
  – Total PoE power budget control
  – Per port PoE function enable/disable
  – PoE port power feeding priority
  – Per PoE port power limitation
  – PD classification detection
  – PD alive check
  – PoE schedule

Industrial Case and Installation

• Compact size with fixed wall-mounted, magnetic wall-mounted or DIN-rail design
• IP40 metal case protection
• Supports -10 to 60 degrees C operating temperature
• Supports ESD 6KV DC Ethernet protection
• Dual power input design
  – 48V~56V DC wide power input with polarity reverse protect function
  – 3-pin terminal block or DC jack connector

Switching

• Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation and auto MDI/MDI-X
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
• 8K MAC address table size
• 10K jumbo frame
• Automatic address learning and address aging
• Supports CSMA/CD protocol

Layer 2 Features

• Supports VLAN
  – IEEE 802.1Q tagged VLAN
  – Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support
  – Protocol VLAN
  – Voice VLAN
  – Private VLAN (Protected port)
  – Management VLAN
  – GVRP
• Supports Spanning Tree Protocol
  – STP (Spanning Tree Protocol)
  – RSTP (Rapid Spanning Tree Protocol)
  – MSTP (Multiple Spanning Tree Protocol)
  – STP BPDU Guard, BPDU Filtering and BPDU Forwarding
• Supports Link Aggregation
  – IEEE 802.3ad Link Aggregation Control Protocol (LACP)
  – Cisco ether-channel (static trunk)
• Provides port mirror (many-to-1)
• Loop protection to avoid broadcast loops

Quality of Service

• Ingress/Egress Rate Limit per port bandwidth control
• Traffic classification
  – IEEE 802.1p CoS
  – TOS/DSCP/IP precedence of IPv4/IPv6 packets
• Strict priority and Weighted Round Robin (WRR) CoS policies

Multicast

• Supports IPv4 IGMP snooping v2, v3
• Supports IPv6 MLD snooping v1, v2
• IGMP querier mode support
• IGMP snooping port filtering
• MLD snooping port filtering

Security

• Storm Control support
  – Broadcast/Unknown unicast/Unknown multicast
• Authentication
  – IEEE 802.1X port-based network access authentication
  – Built-in RADIUS client to cooperate with the RADIUS servers
  – DHCP Option 82
  – RADIUS/TACACS+ authentication
• Access Control List
  – IPv4/IPv6 IP-based ACL
  – IPv4/IPv6 IP-based ACE
  – MAC-based ACL
  – MAC-based ACE
• MAC Security
  – Static MAC
  – MAC filtering
• Port security for source MAC address entries filtering
• DHCP snooping to filter distrusted DHCP messages
• Dynamic ARP inspection discards ARP packets with invalid MAC address to IP address binding
• IP source guard prevents IP spoofing attacks
• DoS attack prevention
• SSH/SSL

Management

• IPv4 and IPv6 dual stack management
• Switch Management Interface
  – IPv4/IPv6 Web switch management
  – Telnet Command Line Interface
  – SNMP v1, v2c, v3
  – SSH and SSL secure access
• User privilege levels control
• Built-in Trivial File Transfer Protocol (TFTP) client
• Static and DHCP for IP address assignment
• System Maintenance
  – Firmware upload/download via HTTP/TFTP
  – Configuration upload/download through HTTP/TFTP
  – Hardware reset button for system reboot or reset to factory default
• SNTP Network Time Protocol
• Cable diagnostics
• Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
• SNMP trap for interface Link-up and Link-down notification
• Event message logging to remote Syslog server
• Four RMON groups (history, statistics, alarms and events)
• PLANET Smart Discovery Utility