Back

Victron SmartSolar 100/20 MPPT Solar Charge Controller Built in Bluetooth

Part Number:MPPT-100/20

Log in or Register for current pricing

Solar Charger MPPT

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

MPPT: Ultra Fast Maximum Power Point Tracking

By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Remote Monitoring and Control

Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by Bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.

Load output

The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.

Battery Voltage - 12 / 24V Auto SelectRated charge current - 20A
Nominal PV power (12V) - 290W
Nominal PV power (24V) - 580W
Maximum PV short circuit current - 20A
Maximum PV open circuit voltage - 100V
Maximum efficiency - 98>#/li###
Self-consumption - 10mA
Charge voltage 'absorption' - 14.4 / 28.8
Charge voltage 'float' - 13.8 / 27.6
Charge algorithm - Multi-stage adaptive
Temp. compensation - (-16mV / -32mV)
Protection - Battery reverse polarity / Output short circuit / Over temperature
Operating temperature - (-30°C to +60°C), full output rated to +40°C
Humidity - 95% max, non-condensing
Data communication port - VE.Direct

Enclosure

Colour - Blue (RAL 5012)
PV Terminals - 6mm2 / AWG10
Battery terminals - 35mm2 / AWG2
Protection category - IP43 (electronic components), IP22 (connection area)
Weight - 0.65kg
Dimensions (mm) -  100 h x 113 w x 60 d

Standards

Safety - EN/IEC 62109-1

Click here to open the datasheets