SGS-6341-24T4X – Planet Layer 3 24-Port 10/100/1000T + 4-Port 10G SFP+ Stackable Managed Switch

Physical Ports

• 24 10/100/1000BASE-T RJ45 copper ports
• 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
• RJ45 to DB9 console interface for switch basic management and setup
• 1 USB2.0 interface for configuration and firmware storage

Stacking Features

• IP Stacking
  – Connects with stack member via Gigabit TP, SFP and 10G SFP+ interfaces
  – Single IP address management, supporting up to 24 IP units stacked together
• Hardware Stacking
  – Virtualized multiple SGS-6341 series stacked into one logical facility
  – Connects with stack members via assigned 10G SFP+ interfaces
  – Single IP address stack management, supporting up to 4 hardware units stacked together
  – Stacking architecture supports redundant Ring mode

IP Routing Features

• IP routing protocol supports RIPv1/v2, RIPng, OSPFv2/v3, BGP4/4+
• Routing interface provides per VLAN routing mode
• VRRPv1/v3 protocol for redundant routing deployment
• Supports route redistribution
• Supports hardware-based wire-speed VLAN routing

Multicast Routing Features

• Supports PIM-DM (Protocol Independent Multicast – Dense Mode) and PIM-SM (Protocol Independent Multicast – Sparse Mode) and PIM-SSM (Protocol Independent Multicast – Source Specific Multicast)
• Supports DVMRP (Distance Vector Multicast Routing Protocol)
• Supports IGMP v1/v2/v3 and MLD v1/v2

Layer 2 Features

• Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard
• Supports auto-negotiation and half-duplex/full-duplex modes for all 10BASE-T, 100BASE-TX and 1000BASE-T ports
• Auto-MDI/MDI-X detection on each RJ45 port
• Prevents packet loss flow control
  – IEEE 802.3x pause frame flow control in full-duplex mode
  – Back pressure flow control in half-duplex mode
• High performance Store-and-Forward architecture, broadcast storm control, port loopback detection
• 16K MAC address table, automatic source address learning and aging
• Supports VLAN
  – IEEE 802.1Q tag-based VLAN
  – GVRP for dynamic VLAN management
  – Up to 256 VLANs groups, out of 4041 VLAN IDs
  – Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported
  – Private VLAN Edge (PVE) supported
  – GVRP protocol for Management VLAN
  – Protocol-based VLAN
  – MAC-based VLAN
  – IP subnet VLAN
• Supports Link Aggregation
  – Maximum 128 trunk groups, up to 8 ports per trunk group
  – IEEE 802.3ad LACP (Link Aggregation Control Protocol)
  – Cisco ether-channel (static trunk)
• Supports Spanning Tree Protocol
  – STP, IEEE 802.1D (Classic Spanning Tree Protocol)
  – RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
  – MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)
  – Supports BPDU & root guard
• Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to many)
• Provides port mirror (many-to-1)
• Supports G.8032 ERPS (Ethernet Ring Protection Switching)

Quality of Service

• 8 priority queues on all switch ports
• Support for strict priority and WRR (Weighted Round Robin) CoS policies
• Traffic classification
  – IEEE 802.1p CoS/ToS
  – IPv4/IPv6 DSCP
  – Port-based WRR
• Strict priority and WRR CoS policies

Multicast

• Supports IPv4 IGMP snooping v1, v2 and v3; IPv6 MLD v1 and v2 snooping
• Querier mode support
• Supports Multicast VLAN Register (MVR)

Security

• IEEE 802.1x port-based network access authentication
• MAC-based network access authentication
• Built-in RADIUS client to cooperate with the RADIUS servers for IPv4 and IPv6
• TACACS+ login users access authentication
• IP-based Access Control List (ACL)
• MAC-based Access Control List
• Supports DHCP snooping
• Supports ARP inspection
• IP Source Guard prevents IP spoofing attacks
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding

Management

• Management IP for IPv4 and IPv6
• Switch Management Interface
  – Console/Telnet Command Line Interface
  – Web switch management
  – SNMP v1, v2c, and v3 switch management
  – SSH/SSL secure access
• BOOTP and DHCP for IP address assignment
• Firmware upload/download via TFTP or HTTP Protocol for IPv4 and IPv6
• SNTP (Simple Network Time Protocol) for IPv4 and IPv6
• User privilege levels control
• Syslog server for IPv4 and IPv6
• Supports DDM
• Four RMON groups 1, 2, 3, 9 (history, statistics, alarms and events)
• Supports sFlow
• Supports ULDP
• Supports ULPP (Uplink Protection Protocol)
• Supports ULSM (Uplink State Monitor protocol)
• Supports LLDP/LLDP MED
• Supports DHCP Option82, Option37/38
• Supports ping, trace route function for IPv4 and IPv6