Back

POE-E304 – Planet 4 Port 30W PoE Extender Splitter / 1-Port 60W PoE

More filters...

6 in stock (can be backordered)

Part Number:POE-E304
Add to List

$125.00 (ex-GST)

PLANET POE-E304 is a 1-port 95W to 4-port 802.3af/at Gigabit PoE Extender designed especially for point to multipoint PoE applications. The POE-E304 can takes 95-watt PoE power and splits a maximum of 65-watt PoE power budget to four PoE output ports, extending the simultaneous transmission distance of both the Gigabit Ethernet Data and PoE over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to up to 200 meters. The POE-E304 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.

Physical Port

  • 5 10/100/1000BASE-T Gigabit RJ45 ports
    - 1-port data + power input
    - 4-port data + power output

Power over Ethernet

  • 1-port data + power input
    - Complies with IEEE 802.3bt PoE++ PD
    - Supports PoE input power up to 95 watts
  • 4-port data + power output
    - Complies with IEEE 802.3af/IEEE 802.3at PoE+/end-span PSE
    - Up to 4 IEEE 802.3af/802.3at devices powered
    - Supports PoE power up to 32 watts for each PoE port
    - Auto detects powered device (PD)
  • Extends the range of PoE to an additional 100 meters (328ft.)
  • Forwards both Ethernet data and PoE power to remote device

Layer 2 Features

  • Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Integrates address look-up engine, supporting 2K absolute MAC addresses
  • 9K jumbo packet support
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation
  • Automatic address learning and address aging

Case and Installation

  • No external power cable installation required
  • Made of metal, desktop size design
  • Wall-mountable, Plug-and-Play installation
  • 0 ~ 50 degrees C operating temperature
POE-E304 - Planet 4 Port 30W PoE Extender Splitter / 1-Port 60W PoE
Hardware Specifications
Network Connector PoE In Port
1 x 10/100/1000BASE-T Ethernet with IEEE 802.3bt PoE++ “Data + DC” in, auto MDI/MDI-X, auto-negotiation RJ45 connector

PoE Out Port
4 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/802.3at PoE “Data + DC” out, auto MDI/MDI-X, auto-negotiation RJ45 connector
Data Rate 10/100/1000Mbps
Switch Architecture Store-and-Forward
MAC Address Table 2K
Data Buffer 1Mbits
Switch Fabric 10Gbps
Switch Throughput 7.44Mpps @ 64 bytes
Jumbo Frame 9K
Flow Control IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
LED Indicators PoE In Port
10/100/1000 LNK/ACT (green)
PoE Out Port 1 to Port 4
10/100/1000 LNK/ACT (green)
PoE-in-Use (orange)
PWR (orange)
Protection ESD: Contact 4KV, Air 6KV
Surge: 4KV
Enclosure Metal
Installation Desktop/Wall mountable
Dimensions (W x D x H) 168 x 93 x 32 mm
Weight 403g
Power Requirements PoE In: IEEE 802.3bt or 4-pair 802.3at PoE+ compliant with voltage within 50V-56V DC
External DC: 50~56V DC
Power Consumption 0.9 watts/3.1BTU (System on)
74 watts/252.4BTU (Full loading with PoE function)
Network Cable 10BASE-T: 4-pair UTP Cat5 up to 100m (328ft)
100BASE-TX: 4-pair UTP Cat5 up to 100m (328ft)
1000BASE-T: 4-pair UTP Cat5e, 6, up to 100m (328ft)
EIA/TIA-568 100-ohm STP (100m, 328ft)
Power over Ethernet
PoE Standard PoE In Port
IEEE 802.3bt Power over Ethernet Plus Plus end-span and mid-span PD class 4 PD
Per PoE Out Port
IEEE 802.3at Power over Ethernet Plus end-span PSE
IEEE 802.3af Power over Ethernet end-span PSE
PoE Power PoE In Port
50~56V DC, max. 95 watts input
Per PoE Out Port
50~55V DC, max. 32 watts output
Power Pin Assignment PoE In Port
1/2 (-), 3/6 (+); 4/5 (+), 7/8 (-)
Per PoE Out Port
1/2 (-), 3/6 (+), end-span (Type A)
PoE Power Budget 65 watts (max.) @ IEEE 802.3bt PoE++ Type 4 PSE input
32 watts (max.) @ IEEE 802.3at PoE+ input
Standard Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Standard Compliance IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
IEEE 802.3x Flow Control
Environment
Operating Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Ordering Information

POE-E304

 1-Port 802.3bt PoE++ to 4-Port 802.3af/at Gigabit PoE Extender
Click here to open the datasheets

Similar Products