Back

POE-E202 – Planet 2 Port PoE Extender Splitter

20 in stock (can be backordered)

Part Number:POE-E202

PLANET POE-E202 is a 1-port to 2-port 802.3af/at Gigabit PoE Extender designed especially for point to multipoint PoE application. The POE-E202 can supply a maximum of 25-watt PoE power budget for two PoE output ports, extending both the Gigabit Ethernet Data and PoE over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to up to two 200m powered devices at the same time. The POE-E202 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.

Physical Port

  • 3-port 10/100/1000BASE-T Gigabit RJ45 interface
    - 1-port data + power input
    - 2-port data + power output

Power over Ethernet

  • 1-port data + power input
    - Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD
    - Supports PoE input power up to 30.8 watts
  • 2-port data + power output
    - Complies with IEEE 802.3af/IEEE 802.3at Power over Ethernet end-span PSE
    - Up to 2 IEEE 802.3af/802.3at devices powered
    - Supports PoE power up to 25 watts for each PoE port
    - Auto detects powered device (PD)
  • Extends the range of PoE to an additional 100 meters (328ft.)
  • Forwards both Ethernet data and PoE power to remote device

Layer 2 Features

  • Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Integrates address look-up engine, supporting 2K absolute MAC addresses
  • 10K iumbo packet support
  • IEEE 802.1Q VLAN transparency
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol

Case and Installation

  • No external power cable installation required
  • Made of metal, desktop size design
  • Wall-mountable, Plug-and-Play installation
  • 0 ~ 50 degrees C operating temperature
POE-E202 - Planet 2 Port PoE Extender Splitter
Interfaces
PoE IN 1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at PoE “Data + DC power” in
auto MDI/MDI-X, auto-negotiation RJ45 connector
PoE OUT 2 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE “Data + DC power” out
auto MDI/MDI-X, auto-negotiation RJ45 connector
Power over Ethernet
PoE Standard “PoE In” Port
IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD class 4 PD
Per “PoE Out” Port
IEEE 802.3at Power over Ethernet Plus end-span PSE
IEEE 802.3af Power over Ethernet end-span PSE
PoE Power Supply Type End-span (Type A)
PoE Power “PoE In” Port
52~56V DC, max. 30.8 watts
Per “PoE Out” Port
44~55V DC, max. 25 watts
Power Pin Assignment “PoE In” Port
1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-)
Per “PoE Out” Port
1/2 (+), 3/6 (-)
Hardware Specifications
Data Rate 10/100/1000Mbps
MAC Address Table 2K
Data Buffer 2Mbits
Switch Architecture Store-and-Forward
Switch Fabric 6Gbps
Switch Throughput 4.46Mpps @ 64 bytes
Jumbo Frame 10KB
Flow Control IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
LED Indicators “PoE In” Port: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green)
“PoE Out” Port 1: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green)
“PoE Out” Port 2: PoE-in-Use x 1 (Orange), LNK/ACT x 1 (Green)
Protection ESD (Ethernet): 2KV (TBD)
Surge (EFT for power) : 2KV (TBD)
Enclosure Metal
Installation Wall mountable
Dimensions (W x D x H) 140 x 77 x 28 mm
Weight 234g
Power Requirements IEEE 802.3at compliant with voltage within 52V-56V DC
Power Consumption 1.6 watts/5.5BTU (System on with PoE input)
2.2 watts/7.5BTU (Ethernet full loading without PoE function)
36 watts/122.8BTU (Full loading with PoE function)
Network Cable 10BASE-T: 4-pair UTP Cat. 5 up to 100m (328ft)
100BASE-TX: 4-pair UTP Cat. 5 up to 100m (328ft)
1000BASE-T: 4-pair UTP Cat. 5e, 6, up to 100m (328ft)
EIA/TIA-568 100-ohm STP (100m, 328ft)
Standard Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Standard Compliance IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3x Flow Control
Environment
Operating Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Ordering Information

POE-E202

1-port 802.3at PoE+ to 2-port 802.3af/at Gigabit PoE Extender
Click here to open the datasheets