LRP-104CET – Planet Industrial 4-Port 10/100TX PoE + 1-Port Coax Long Reach PoE Extender
The LRP-104CET, a PLANET Long Reach PoE solution, is an industrial-grade Single-port Long Reach PoE to 4-port 802.3af/at PoE Extender delivered in an IP30 rugged strong case. It features long-range data and power transmission over any existing coaxial, UTP, twisted-pair cable or telephone wires for distance up to 1,000m and converts power to standard 802.3af/at PoE over another 100-meter Ethernet cable connected to four remote PoE PDs at the same time.
- Key Features
- Specifications
- Applications
Physical Ports
- LRP interfaces
– 1 BNC female, Long Reach PoE over Coaxial PD
– 1 RJ45 connector, Long Reach PoE over UTP PD - Copper interfaces
– 4 10/100BASE-TX RJ45 ports with IEEE 802.3at PoE Plus PSE
Long Reach Power over Ethernet
- Power and Ethernet data transmission over coaxial up to 1km
- Power and Ethernet data transmission over UTP up to 500m
- Supports Long Reach PoE power up to 25 watts (depending on LRP Injector/Switch and cable distance)
Power over Ethernet
- Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
- Supports PoE power budget up to 120 watts (external DC power input)
- Supports PoE power up to 30 watts for each PoE port (external DC power input)
- Auto detects remote PD
Industrial Design
- IP30 aluminum case
- DIN rail and wall-mount design
- -20 to 70 degrees C operating temperature
- 24~48V DC, redundant power with polarity reverse protect function
Hardware Specifications | ||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ethernet Interface | ■ Copper Ports • Four 10/100BASE-TX RJ45 auto-MDI/MDI-X■ PoE Injector Ports • Four ports with 802.3at/af PoE injector function with Port-1 to Port-4■ Functionality • Four DIP switches to control PoE output on or off with Port-1 to Port-4■ PoE Standards Compliance • IEEE 802.3at Power over Ethernet Plus/PSE■ PoE Type • End-span ■ PoE Power output ■ Cabling ■ Maximum Distance ■ Maximum Frame size | |||||||||||||||||||||||||||||||||
Long Reach PoE Interface | ■ Connectivity • One BNC female Long Reach PoE over Coaxial PD • One RJ45 connector Long Reach PoE over UTP PD■ Power Input • 44~ 56V DC■ Power Pin Assignment • BNC center pole: DC+ • BNC shield: DC- • RJ45 Pins 1, 3, 5, 7: VCC+ • RJ45 Pins 2, 4, 6, 8: VCC-■ Cabling • Coaxial cable: 75 ohm • RG-6/U cable, less than12Ω/1000 ft. • RG-59/U cable, less than 30Ω/1000 ft. • Cat. 3, 4, 5, 5e UTP cable (100 meters, max.) • EIA/TIA-568 100-ohm STP (100 meters, max.)■ Maximum Distance • Coaxial – Max. 200m with PoE+ output (656ft.) – Max. 1000m with PoE output (3,280ft.) • UTP – Max. 500m with PoE+ output (1,640ft.) ■ Long Reach Ethernet Stan dard ■ Modulation Type ■ Security ■ Frequency Band ■ Encryption ■ LRP Compatibility | |||||||||||||||||||||||||||||||||
LED Indicator | 3 x LED for External Power Supply: DC Power 1 (Green) DC Power 2 (Green) Power Fault ( Red ) 4 x LED for PoE Usage: 10W/20W/30W/40W (Green) 2 x LED for Long Reach PoE In: PWR (Green) LNK (Green) 2 x LED for each RJ45 interface (Port-1 and Port-4): 10/100Mbps LNK/ACT (Green) PoE-in-use (Orange) | |||||||||||||||||||||||||||||||||
Installation | DIN rail kit and wall-mount kit | |||||||||||||||||||||||||||||||||
Dimensions (W x D x H) | 56 x 87.8 x 135 mm | |||||||||||||||||||||||||||||||||
Weight | 644g | |||||||||||||||||||||||||||||||||
Power Requirements | 44~56V DC power over coaxial input DC 24~48V, redundant power with polarity reverses protection function | |||||||||||||||||||||||||||||||||
Power Consumption/Dissipation | 130 watts/446BTU (Ethernet with PoE Full Loading) | |||||||||||||||||||||||||||||||||
Alarm | One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC | |||||||||||||||||||||||||||||||||
Enclosure | Aluminum case | |||||||||||||||||||||||||||||||||
Standards Conformance | ||||||||||||||||||||||||||||||||||
Standards Compliance | IEEE 802.3 Ethernet/10BASE-T IEEE 802.3u Fast Ethernet/100BASE-TX IEEE 802.3x Full-Duplex Flow Control IEEE 802.3at Power over Ethernet Plus | |||||||||||||||||||||||||||||||||
Regulatory Compliance | FCC Part 15 Class A, CE | |||||||||||||||||||||||||||||||||
Stability Testing | IEC60068-2-32 (free fall) IEC60068-2-27 (anti-shock) IEC60068-2-6 (anti-vibration) | |||||||||||||||||||||||||||||||||
Environment | ||||||||||||||||||||||||||||||||||
Temperature | Operating: -20~70 degrees C Storage: -25~75 degrees C | |||||||||||||||||||||||||||||||||
Humidity | Operating: 5~95% (non-condensing) Storage: 5~95% (non-condensing) | |||||||||||||||||||||||||||||||||
Performance | ||||||||||||||||||||||||||||||||||
Coaxial Performance |
| |||||||||||||||||||||||||||||||||
UTP Performance |
*As there are various resistance values in the category of RG-59/U or RG-6/U cable, the actual data rate will vary on the quality of the copper wire and environmental factors. **Depending on what the DC/PoE power input and the length of coaxial cable are. |