ISW-621TF – Planet 4-Port + 2-Port SFP Industrial Ethernet Switch with Wide Operating Temperature
PLANET ISW-621TF is an Industrial Ethernet Switch that can operate under temperature environment ranging from -40 up to 75 degrees C and is equipped with 4 10/100 Ethernet and 2 100Base-FX SFP ports. The two SFP interfaces allow transmission to be extended from 2 kilometers (via multi-mode fibre) up to 60 kilometres (via single-mode fiber).
- Key Features
- Specifications
- Applications
Physical Port
– 4-port 10/100Base-TX RJ-45 with auto MDI/MDI-X function
– 2-port 100Base-FX SFP interface
Layer 2 Features
– Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Ethernet standard
– Supports auto negotiation and 10/100Mbps half / full duplex mode for each copper port
– High performance Store and Forward architecture
– Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
– Backplane (Switching Fabric): 1.2Gbps
– Integrated address look-up engine, supporting 2K absolute MAC addresses
– 1Mbit on-chip frame buffer
– Automatic address learning and address aging
– CSMA/CD Protocol
Industrial Case / Installation
– IP30 metal case protection
– DIN rail and wall mount design
– 12 to 48V DC, redundant power with polarity reverse protection and connective removable terminal block for master and slave power
– Supports EFT protection 6KV DC for power line
– Supports 6KV DC Ethernet ESD protection
– -40 to 75 degrees C wide operating temperature
Hardware Specifications | |
---|---|
Copper Interface | Ports 4 x 10/100Base-TX, auto negotiation, auto-MDI/MDI-X Cable 10Base-T: 2-pair UTP Cat. 3, 4, 5 cable (100meters, max.) 100Base-TX: 2-pair UTP Cat. 5, 5e, 6 cable (100meters, max.) |
Optical Interface | Port / Type 2 x 100Base-FX / LC interfaces Cable Multi-mode: 50/125μm / 62.5/125μm fiber Single-mode: 9/125μm fiber |
Dimensions (W x D x H) | 135 x 97 x 32 mm |
Weight | 442g |
Power Requirements | 12~48V DC, Redundant power with polarity reverse protection |
Power Consumption / Dissipation | Max. 16 watts / 54 BTU |
Installation | DIN rail kit / wall mount ear |
Alarm | Provides one relay output for power failure Alarm relay current carry ability: 1A @ DC 24V |
Switch Specifications | |
Switch Processing Scheme | Store-and-Forward |
Address Table | 2K entries |
Buffer | 1Mbit |
Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
Switch Fabric | 1.2Gbps |
Throughput (Packet Per Second) | 0.89Mpps @ 64Bytes |
Standards Conformance | |
Standards Compliance | IEEE 802.3 Ethernet, 10Base-T IEEE 802.3u Fast Ethernet, 100Base-TX, 100Base-FX IEEE 802.3x Flow Control |
Regulation Compliance | FCC Part 15 Class A, CE |
Stability Testing | IEC60068-2-32 (Free fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration) |
Environment | |
Temperature | Operating: -40~75 degrees C Storage: -40~85 degrees C |
Humidity | Operating: 5~90% Storage: 5~90% (non-condensing) |
Ordering Information | |
---|---|
ISW-621TF | 4-Port 10/100Base-TX + 2-Port 100Base-FX SFP Industrial Ethernet Switch (-40 ~ 75 degrees C operating temperature) |