ISW-504PT – Planet 5-Port with 4-Port PoE Industrial Ethernet Switch
Part Number:
ISW-504PT
Categories Industrial, PoE, PoE Switches, PoE Switches, Switches, Switches
Tags 4 Port, Industrial
Brand: Planet
ISW-504PT is a PLANET Industrial, DIN-rail Unmanaged Fast Ethernet PoE+ Switch with 4 10/100BASE-TX PoE+ ports, and 1 additional Fast Ethernet interface for video uplink. The ISW-504PT is designed with 12-48VDC redundant power system with a total power budget of up to 120 watts and operating temperature ranging from -40 to 75 degrees C in a rugged IP40 metal housing.
- Key Features
- Specifications
- Applications
Physical Port
- 5-Port 10/100Mbps RJ-45 with auto MDI/MDI-X function
- 4-Port support 48V DC power to PoE Powered Device (Port-1 to Port-4)
IEEE 802.3af PoE
- Complies with IEEE 802.3af Power over Ethernet End-Span PSE
- Up to 4 IEEE 802.3af devices powered
- Supports PoE Power up to 15.4 Watts for each PoE port
- Auto detect powered device (PD)
- Circuit protection prevent power interference between ports
- Remote power feeding up to 100m
Layer 2 Features
- Supports Auto-Negotiation and 10/100Mbps Half / Full Duplex and Auto MDI/MDI-X
- High performance Store and Forward architecture, runt / CRC filtering eliminates
- erroneous packets to optimize the network bandwidth
- Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame
- flow control (Full-Duplex)
- Automatic address learning and address aging
- Integrated address look-up engine, support 2K absolute MAC addresses
- CSMA / CD Protocol
Industrial Case / Installation
- IP-30 Aluminum metal case protection
- DIN Rail and Wall Mount Design
- Redundant Power Design
- 24V or 48V DC, redundant power with polarity reverse protect function
- Supports EFT protection 6000 VDC for power line
- Supports 6000 VDC Ethernet ESD protection
- -40 to 75 Degree C operation temperature
Hardware Specifications | |
---|---|
Fast Ethernet Copper Ports | Five 10/100BASE-TX RJ45 auto-MDI/MDI-X ports (Port-1 to Port-5) |
PoE Injector Port | Four ports with 802.3af/at PoE+ injector function (Port-1 to Port-4) |
Switch Architecture | Store-and-Forward |
Switch Fabric | 1Gbps/non-blocking |
Switch Throughput@64 bytes | 0.74Mpps @64 bytes |
MAC Address Table | 1K entries |
Flow Control | IEEE 802.3x pause frame for full duplex Back pressure for half duplex |
Jumbo Frame | 1536 Bytes |
DIP Switch (Port-1 to Port-4) | Standard mode: 30-watt PoE transmission distance of 100m at speed of 10/100Mbps VLAN mode: “Port-based VLAN Protection” where ports can be isolated from each other via one DIP switch. Only Port-5 can visit other ports. Extend mode: 25-watt PoE transmission distance of 250m at speed of 10Mbps |
LED Indicators | 3 x LED for System and Power:
2 x LED for PoE Copper Port (Port-1~Port-4):
1 x LED for 10/100TX Copper Port (Port-5):
4 x LED for PoE Usage
|
Connector | Removable 6-pin terminal block
|
Alarm | One relay output for power failure. Alarm relay current carry ability: 1A @ 24V AC |
Power Requirements | 12~48V DC, 7A (max.) |
Power Consumption/ Dissipation | 3.7 watts, 12.6 BTU (Standby without PoE function) at DC 12V power input 70 watts, 238.8 BTU (Full loading with PoE function) at DC 12V power input 4.6 watts, 15.7 BTU (Standby without PoE function) at DC 24V power input 105.1 watts, 358.6 BTU (Full loading with PoE function) at DC 24V power input 4.8 watts, 16.4 BTU (Standby without PoE function) at DC 48V power input 136.8 watts, 466.8 BTU (Full loading with PoE function) at DC 48V power input |
Dimensions (W x D x H) | 50 x 85.1 x 135 mm |
Weight | 596g |
ESD Protection | 5KV DC |
Enclosure | IP40 metal case |
Installation | DIN-rail kit and wall-mount kit |
Power over Ethernet | |
PoE Standard | IEEE 802.3at Power over Ethernet Plus/PSE |
PoE Power Supply Type | End-span |
Power Pin Assignment | 1/2 (+), 3/6 (-) |
PoE Power Output | Per port 54V DC , max. 36 watts |
PoE Power Budget (max.) | 60W @12V DC input 90W @24V DC input 120W @48V DC input |
Max. Number of Class 2 PDs | 4 |
Max. Number of Class 3 PDs | 4 |
Max. Number of Class 4 PDs | 4 |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Stability Testing | IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) |
Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3x Flow Control and Back Pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus |
Environment | |
Operating Temperature | -40 ~ 75 degrees C |
Storage Temperature | -40 ~ 85 degrees C |
Humidity | 5 ~ 95% (non-condensing) |
Ordering Information | |
---|---|
ISW-504PT | Industrial 5-Port 10/100TX Ethernet Switch with 4-Port 802.3at PoE+ |
