Physical Port
- Three 10/100/1000BASE-T Gigabit RJ45 ports
– 1-port data + power input
– 2-port data + power output
Power over Ethernet
- 1-port data + power input
– Complies with IEEE 802.3bt PoE++ Type 4 standard PD
– Compatible with PoH (Power over HDBASE-T) protocol
– Backward compatible with IEEE 802.3at PoE+ end-span or mid-span PD
– Supports PoE input power up to 95 watts - 2-port data + power output
– Complies with IEEE 802.3at Power over Ethernet mid-span PSE
– Up to 2 IEEE 802.3af/802.3at PoE devices powered
– Supports total PoE budget up to 65 watts for 2 PoE output ports
– Auto detects powered device (PD) - Extends the range of PoE to an additional 100 meters (328ft.)
- Forwards both Ethernet data and PoE power to remote device
Layer 2 Features
- Hardware-based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation and auto MDI/MDI-X
- Features Store-and-Forward mode with wire-speed filtering and forwarding rates
- IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
- Integrates address look-up engine, supporting 2K absolute MAC addresses
- 9K jumbo frame support in 1000Mbps duplex mode
- Automatic address learning and address aging
Industrial Case and Installation
- IP67-rated aluminum case
- Wall-mount design
- Supports 6KV DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
- No external power cable required for installation
- Plug and Play installation
