Back

IPOE-171-95W – Planet Industrial Single-Port 10/100/1000Mbps 802.3bt PoE++ Injector (95 Watts, -40~75 degrees C, 12~48V DC)

More filters...

4 in stock (can be backordered)

Part Number:IPOE-171-95W
Add to List

$458.00 (ex-GST)

PLANET IPOE-171-95W is a Single Port, Industrial 802.3bt Power over Ethernet Injector allowing up to 95 watts of power output over Ethernet cables. It is also allows 100M/1G/2.5G/5G Ethernet to handle extremely large amounts of data transmission.

Interface

  • 2 Multi-Gigabit RJ45 interfaces
    - 1-port Data + Power output
    - 1-port Data input
  • 1 terminal block for master and slave power input. (Power Range: 12 ~ 48V DC redundant power)
  • 1 PoE mode (standard/legacy and force) DIP switch

Power over Ethernet

  • Complies with IEEE 802.3at/bt PoE end-span/mid-span PSE
  • Supports PoE power up to 95 watts for PoE port
  • Auto-detection of PoE IEEE 802.3at/bt equipment and devices from being damaged by incorrect installation
  • Monitors the status of the total PoE usage in real time
  • Remote power feeding up to 100m

Hardware

  • IP30 slim type metal case
  • LED indicators for Power LED , PoE-in-Use LED and PoE Usage LED

Industrial Case and Installation

  • Solid wall mount or DIN-rail mount installation
  • Supports 6KV DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
IPOE-171-95W - Planet Industrial Single-Port 10/100/1000Mbps 802.3bt PoE++ Injector (95 Watts, -40~75 degrees C, 12~48V DC)
Hardware Specifications
Interface Input Port
1 x RJ45 STP
Data In

Output Port
1 x RJ45 STP
PoE (Data + Power) Out

Input power terminal block
1
Network Cable Twisted-pair cable up to 100 meters (328ft)
10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6, 6A
100BASE-TX: 4-pair UTP Cat. 5, 5e, 6, 6A
1G/2.5G: 4-pair UTP Cat. 5e, 6, 6A
5G: 4-pair UTP Cat. 6, 6A
LED Indicators System: Power 1 (Green), Power 2 (Green), Fault (Red)
PoE Port: PoE-in-Use x 1 (Amber)
PoE Usage: PoE Usage x 3 (Amber)
Data Rate 10M/100M/1G/2.5G/5Gbps
ESD Protection 6KV DC
Enclosure Metal case
Dimensions (W x D x H) 135 x 87.8 x 32 mm
Weight 470g
Power Requirements DC +/-12 ~ +/-48V, 5A max.
Unit Output Voltage DC 54V
Power Consumption 120 watts max.
No. of devices that can be powered 1
Installation DIN-rail kit or wall-mount ear
Alarm Provides one relay output for power failure
Alarm Relay current carry ability: 1A @ DC 24V
Enclosure IP30 slim type metal case
Power over Ethernet
PoE Standard IEEE 802.3at/bt PSE
PoE Power Output Budget DC 54V / 95-watt PoE via 4-pair
DC 54V / 36-watt PoE via 2-pair
PoE Power Output DC 24V~48V input:
Max. 89.5W@1m cable
Max. 75W@100m cable

DC 12V input:
Max. 60W@1m cable
Max. 52W@100m cable
PoE Power Supply Type End-span + Mid-span
Power Pin Assignment Pair 1 End-span: 1/2 (-), 3/6 (+)
Pair 2 Mid-span: 4/5 (+), 7/8 (-)
PoE Mode Standard mode
Legacy and Force mode
Standards Conformance
Standards Compliance IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3bz 2.5G/5GBASE-T
IEEE 802.3bt 4-pair Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
Regulatory Compliance FCC Part 15 Class A, CE
Environment
Operating Temperature -40 ~ 75 degrees C
Storage Temperature -40 ~ 85 degrees C
Operating Humidity 5 ~ 90%, relative humidity, non-condensing
Storage Humidity 5 ~ 90%, relative humidity, non-condensing
Standard Accessories
Package Contents
  • IPOE-171-95W
  • User's manual
  • Wall-mount kit
  • Dust cap
Ordering Information

IPOE-171-95W

 Industrial Single-Port Multi-Gigabit 802.3bt PoE++ Injector (95 watts, -40~75 degrees C, 12~48V DC)
Click here to open the datasheets

Similar Products