Categories

IGS-5225-8P2S2X – Planet Industrial 8-Port 10/100/1000T 802.3at PoE 2-Port 1G/2.5G SFP 2-Port 10G SFP – Managed Ethernet Switch

The IGS-5225-8P2S2X is the smallest 10G uplink Layer 3 managed PoE switch specifically designed for industrial networks. Based on its 10Gbps big pipe connectivity to core networks, the IGS-5225-8P2S2X, equipped with 8 Gigabit ports featuring 36-watt 802.3at PoE+ and two 10Gbps SFP+ uplink slots, meets the demands of high power consumption and high bandwidth for 11ac Gigabit Wi-Fi APs and other PoE applications which require heavy traffic loading.

Physical Port

  • Eight 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector function
  • 2 100/1000/2500BASE-X mini-GBIC/SFP slots for SFP type auto detection
  • 2 10GBASE-SR/LR SFP+ slots, backward compatible with 1000BASE-SX/LX/BX and 2500BASE-X SFP
  • One RJ45 console interface for basic management and setup

 

Power over Ethernet 

  • Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
  • Up to 8 IEEE 802.3af/802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE management features
    – Total PoE power budget control
    – Per port PoE function enable/disable
    – PoE admin-mode control
    – PoE port power feeding priority
    – Per PoE port power limit
    – PD classification detection
  • Intelligent PoE features
    – Temperature threshold control
    – PoE usage threshold control
    – PD alive check
    – PoE schedule

 

Industrial Protocol

  • Modbus TCP for real-time monitoring in the SCADA system
  • IEEE 1588v2 PTP (Precision Time Protocol)

 

Industrial Case and Installation

  • IP30 aluminum case
  • DIN-rail and wall-mount designs
  • 48~56V DC, redundant power with reverse polarity  protection
  • Supports 6000V DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
Hardware Specifications
Hardware Version3
Copper Ports8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots2 1000BASE-SX/LX/BX SFP interfaces (Port-9 and Port-10)
Compatible with 100BASE-FX and 2500BASE-X SFP
SFP+ Slots2 10GbBASE-SR/LR SFP+ interfaces (Port-11 and Port-12)
Compatible with 1000BASE-SX/LX/BX and 2500BASE-X SFP transceiver
PoE Injector Port8 ports with 802.3at/af PoE injector function with Port-1 to Port-8
Console1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
Reset Button< 5 sec: System reboot
> 5 sec: Factory default
ESD Protection6KV DC
EnclosureIP30 aluminum case
InstallationDIN rail kit and wall-mount kit
ConnectorRemovable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
Removable 6-pin terminal block for DI/DO interface
Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND
AlarmOne relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC
2 Digital Input (DI)Level 0: -24V~2.1V (±0.1V)
Level 1: 2.1V~24V (±0.1V)
Input load to 24V DC, 10mA max.
2 Digital Output (DO)Open collector to 24V DC, 100mA max.
Dimensions (W x D x H)72 x 107 x 152 mm
Weight1684g
Power RequirementsDual 48~56V DC (>51V DC for PoE+ output recommended)
Power ConsumptionMax. 11.1 watts/37.87BTU (Power on without any connection)
Max. 306 watts/1043.46BTU (Full loading with PoE function)
LED IndicatorSystem:
Power 1 (Green)
Power 2 (Green)
Fault Alarm (Red)
Ring (Green)
R.O. (Green)
DIDO (Red)
Per 10/100/1000T RJ45 Ports:
LNK/ACT (Green)
PoE In-Use (Orange)
Per 100/1000/2500BASE-X SFP Interface:
1G/2.5G LNK/ACT (Green)
100 LNK/ACT (Orange)
Per SFP+ Interface:
1G/2.5G LNK/ACT (Green)
10G LNK/ACT (Orange)
Switching
Switch ArchitectureStore-and-Forward
Switch Fabric66Gbps/non-blocking
Throughput (packet per second)49.107Mpps@ 64Bytes packet
Address Table32K entries, automatic source address learning and aging
Shared Data Buffer16Mbits
Jumbo Frame10Kbytes
Flow ControlIEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Power Over Ethernet
PoE StandardIEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply TypeEnd-span
PoE Power OutputIEEE 802.3af Standard
– Per port 48V~51V DC (depending on the power supply), max. 15.4 watts
IEEE 802.3at Standard
– Per port 51V~56V DC (depending on the power supply), max. 36 watts
Power Pin Assignment1/2(+), 3/6(-)
PoE Power BudgetDual power input: 240W maximum (depending on power input)
Max. number of Class 2 PDs8
Max. number of Class 3 PDs8
Max. number of Class 4 PDs8
Layer 3 Function
IP InterfacesMax. 128 VLAN interfaces
Routing TableMax. 128 routing entries
Routing ProtocolsIPv4 hardware static routing
IPv6 hardware static routing
IPv4 OSPFv2 dynamic routing
Layer 2 Function
Port ConfigurationPort disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Port StatusDisplay each port’s speed duplex mode, link status, flow control status,
auto negotiation status, trunk status
Port MirroringTX/RX/Both
Many-to-1 monitor
VLANIEEE 802.1Q tag-based VLAN
IEEE 802.1ad Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
GVRP (GARP VLAN Registration Protocol)
Up to 4K VLAN groups, out of 4094 VLAN IDs
Link AggregationIEEE 802.3ad LACP/static trunk
Supports 6 trunk groups with 4 ports per trunk group
QoSTraffic classification based, strict priority and WRR
8-level priority for switching
– Port number
– 802.1p priority
– 802.1Q VLAN tag
– DSCP/TOS field in IP packet
IGMP SnoopingIPv4 IGMP (v1/v2/v3) snooping, up to 255 multicast groups
IPv4 IGMP querier mode support
MLD SnoopingIPv6 MLD (v1/v2) snooping, up to 255 multicast groups
IPv6 MLD querier mode support
Access Control ListIP-based ACL/MAC-based ACL
Up to 512 entries
Bandwidth ControlPer port bandwidth control
Ingress: 500Kb~1000Mbps
Egress: 500Kb~1000Mbps
Switch Management
Basic Management InterfacesConsole; Telnet; Web browser; SNMP v1, v2c
Secure Management InterfacesSSHv2, TLSv1.2, SSL, SNMP v3
SNMP MIBsRFC 1213 MIB-II
IF-MIB
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2819 RMON MIB (Groups 1, 2, 3 and 9)
RFC 2737 Entity MIB
RFC 2618 RADIUS Client MIB
RFC 2933 IGMP-STD-MIB
RFC 3411 SNMP-Frameworks-MIB
IEEE 802.1X PAE
LLDP
MAU-MIB
Standards Conformance
Regulatory ComplianceFCC Part 15 Class A, CE
Stability TestingIEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Standards ComplianceIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1ad Q-in-Q VLAN stacking
IEEE 802.1X Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3ah OAM
IEEE 802.1ag Connectivity Fault Management(CFM)
IEEE 1588 PTPv2
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
RFC 3810 MLD version 2
ITU G.8032 ERPS Ring
ITU-T G.8032 ERPS Ring
ITU-T Y.1731 Performance Monitoring
Environment
Operating Temperature-40 ~ 75 degrees C
Storage Temperature-40 ~ 85 degrees C
Humidity5 ~ 95% (non-condensing)

SIMILAR PRODUCTS