Back

IGS-510TF – Planet Industrial Compact 4-Port 10/100/1000T 1-Port 100/1000X SFP Gigabit Ethernet Switch

Physical Port

  • 4-port 10/100/1000BASE-T RJ45 with auto-MDI/MDI-X function
  • One SFP slot, supporting 1000BASE-X and 100BASE-FX transceiver dual mode

Layer 2 Features

  • Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T Ethernet standard
  • Supports auto-negotiation and 10/100Mbps half/full duplex and 1000Mbps full duplex
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High-performance Store and Forward architecture, broadcast storm control and runt/CRC filtering eliminate erroneous packets to optimize the network bandwidth
  • Backplane (switching fabric): 10Gbps
  • Integrated address look-up engine, supporting 4K absolute MAC addresses
  • 9K jumbo packet size
  • Automatic address learning and address aging
  • CSMA/CD Protocol

Industrial Case and Installation

  • IP30 metal case
  • DIN rail and wall-mount designs
  • 9 to 48V DC and 24V AC power support, redundant power with reverse polarity protection
  • Removable terminal block for master and slave power
  • Supports 6000 VDC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
  • Free fall, shock-proof and vibration-proof for industries
IGS-510TF - Planet Industrial Compact 4-Port 10/100/1000T 1-Port 100/1000X SFP Gigabit Ethernet Switch
Hardware Specifications
Copper Ports 4-port 10/100/1000BASET RJ45 TP auto-MDI/MDI-X, auto negotiation
SFP Slots 1 1000BASE-SX/LX/BX SFP interface
Compatible with 100BASE-FX SFP
Connector Removable 4-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for Power 2
LED 2 x LED for system and power:
Green: DC Power 1
Green: DC Power 2
2 x LED for each copper port
Green: 1000Mbps LNK/ACT
Orange:10/100Mbps LNK/ACT
1 x LED for SFP fiber slot
Green: LNK/ACT
ESD Protection 6KV
Power Requirements 9~48V DC, redundant power with reverse polarity protection, 24V AC power support
Power Consumption / Dissipation 2.8 watts/9.5BTU
Installation DIN-rail kit and wall-mount ear
Enclosure IP30 metal case
Dimensions (W x D x H) 30 x 70 x 104 mm
Weight 252g
Switch Specifications
Switch Processing Scheme Store-and-Forward
Address Table 4K entries
Buffer Memory 1M bits on-chip buffer memory
Flow Control Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Switch Fabric 10Gbps
Throughput (packet per second) 7.4Mpps@64bytes
Jumbo Frame 9K
Network Cables 10/100/1000BASE-T
Cat. 3, 4, 5, 5e, 6 UTP cable (max. 100 meters)
EIA/TIA-568 100-ohm STP (max. 100 meters)
Standards Conformance
Standards Compliance IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3az Gigabit SX/LX
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.1p Class of Service
Regulatory Compliance FCC Part 15 Class A, CE
Stability Testing IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
Environment
Temperature Operating: -40~75 degrees C
Storage: -40~75 degrees C
Humidity Operating: 5~90%, Storage: 5~90% (non-condensing)
Click here to open the datasheets