Back

IGS-501T – Planet 5-Port Gigabit Industrial Switch

Available on backorder

Part Number:IGS-501T

An advanced, slim-type, industrial, hardened Gigabit Ethernet Switch with IP30 metal case consists of 5 10/100/1000Mbps auto negotiation ports and thus, it operates reliably in heavy industrial demanding environments.Its compact IP30 standard metal case features either DIN rail or wall mount for the efficient use of cabinet space.

Physical Port

  • 5-port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function

Layer 2 Features

  • Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T Ethernet standard
  • Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
  • High performance Store and Forward architecture, broadcast storm control and runt/CRC filtering eliminate erroneous packets to optimize the network bandwidth
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Backplane (switching fabric): 10Gbps
  • Integrated address look-up engine, supporting 2K absolute MAC addresses
  • 1M bits on-chip buffer memory
  • 9K Jumbo packet size support
  • Automatic address learning and address aging
  • CSMA/CD Protocol

Industrial Case / Installation

  • IP30 metal case
  • DIN rail and wall-mount design
  • 12 to 48V DC, redundant power with polarity reverse protect function and connective, removable terminal block for master and slave power; 24V AC power support
  • Supports EFT protection 6000V DC for power line
  • Supports 6000V DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
IGS-501T - Planet 5-Port Gigabit Industrial Switch
Hardware Specifications
Hardware Version 4
Copper Ports 5 x 10/100/1000Base-T RJ45 TP auto-MDI/MDI-X, auto-negotiation
Connector Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Alarm Provides one relay output for power failure Alarm relay current carry ability: 1A @ DC 24V
LED 3 x LED for system and power: ■ Green: DC Power 1 ■ Green: DC Power 2 ■ Green: Power Fault 2 x LED for each copper port ■ Green: 1000Mbps LNK/ACT ■ Orange:10/100Mbps LNK/ACT
ESD Protection 6KV
EFT Protection 6KV
Power Requirements 12~48V DC, Redundant power with polarity reverse protection function, 24V AC power support
Power Consumption / Dissipation 5.28 watts/18BTU
Installation DIN rail kit and wall-mount ear
Enclosure IP30 metal case
Dimensions (W x D x H) 135 x 87 x 32 mm
Weight 498g
Switch Specifications
Switch Processing Scheme Store-and-Forward
Address Table 2K entries
Buffer Memory 1M bits on-chip buffer memory
Flow Control Back pressure for half duplex IEEE 802.3x pause frame for full duplex
Switch Fabric 10Gbps
Throughput (packet per second) 7.4Mpps @64bytes
Jumbo Frame 9K
Network Cables 10/100/1000Base-T Cat. 3, 4, 5, 5e, 6 UTP cable [100 meters (max.)] EIA/TIA-568 100-ohm STP [100 meters (max.)]
Standards Conformance
Standards Compliance IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.1p Class of Service
Regulation Compliance FCC Part 15 Class A, CE
Stability Testing IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration)
Environment
Temperature Operating: -40~75 degrees C Storage: -40~75 degrees C
Humidity Operating: 5~90% Storage: 5~90% (non-condensing)
Click here to open the datasheets