IGS-20160HPT Planet 16-Port 30W PoE Gigabit Industrial Switch with 2 Port Uplink and 2 Port SFP

Physical Port

• 16 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector
• 2 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
• 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection
• One RJ45 console interface for basic management and setup

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
• Up to 16 IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m
• PoE management features
  – Total PoE power budget control
  – Per port PoE function enable/disable
  – PoE admin-mode control
  – PoE port power feeding priority
  – Per PoE port power limit
  – PD classification detection
• Intelligent PoE features
  – Temperature threshold control
  – PoE usage threshold control
  – PD alive check
  – PoE schedule

Industrial Protocol

• Modbus TCP for real-time monitoring in the SCADA system
• IEEE 1588v2 PTP (Precision Time Protocol)

Industrial Case & Installation

• IP30 aluminum case protection
• DIN rail and wall-mount design
• 48~56V DC, redundant power with polarity reverse protect function
• Supports 6000V DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature

Digital Input & Digital Output

• 2 Digital Input (DI)
• 2 Digital Output (DO)
• Integrate sensors into auto alarm system
• Transfer alarm to IP network via email and SNMP trap

Layer 2 Features

• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Storm Control support
  – Broadcast/Multicast/Unicast
• Supports VLAN
  – IEEE 802.1Q tagged VLAN
  – Up to 255 VLANs groups, out of 4094 VLAN IDs
  – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
  – Private VLAN Edge (PVE)
  – Protocol-based VLAN
  – MAC-based VLAN
  – Voice VLAN
  – GVRP (GARP VLAN Registration Protocol)
• Supports Spanning Tree Protocol
  – IEEE 802.1D Spanning Tree Protocol (STP)
  – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
  – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
  – BPDU Guard
• Supports Link Aggregation
  – 802.3ad Link Aggregation Control Protocol (LACP)
  – Cisco ether-channel (static trunk)
  – Maximum 10 trunk groups with 4 ports per trunk group
  – Up to 8Gbps bandwidth (duplex mode)
• Provides port mirror (1-to-1)
• Port mirroring to monitor the incoming or outgoing traffic on a particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• Compatible with Cisco Uni-directional link detection (UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices
• Link Layer Discovery Protocol (LLDP)

Layer 3 IP Routing Features

• Supports maximum 32 software static routes and route summarization

Quality of Service

• Ingress Shaper and Egress Rate Limit per port bandwidth control
• 8 priority queues on all switch ports
• Traffic classification
  – IEEE 802.1p CoS
  – IP TOS/DSCP/IP precedence
  – IP TCP/UDP port number
  – Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic-policing policies on the switch port
• DSCP remarking

Multicast

• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4 IGMP snooping port filtering
• IPv6 MLD snooping port filtering
• MVR (Multicast VLAN Registration)

Security

• IEEE 802.1x Port-based/MAC-based network access authentication
• Built-in RADIUS client to cooperate with the RADIUS servers
• TACACS+ login users access authentication
• RADIUS/TACACS+ users access authentication
• IP-based Access Control List (ACL)
• MAC-based Access Control List
• Source MAC/IP address binding
• DHCP snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized intruder

Management

• Switch Management Interfaces
  – Console/Telnet Command Line Interface
  – Web switch management
  – SNMP v1 and v2c switch management
  – SSH/SSL and SNMP v3 secure access

• Four RMON groups (history, statistics, alarms, and events)
• IPv6 IP address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• Firmware upload/download via HTTP/TFTP
• DHCP Relay
• DHCP Server
• DHCP Option 82
• User Privilege levels control
• Network Time Protocol (NTP)
• Link Layer Discovery Protocol (LLDP)
• SFP-DDM (Digital Diagnostic Monitor)
• Network Diagnositc
  – ICMPv6/ICMPv4 Remote Ping
  – Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
• Reset button for system reboot or reset to factory default
• PLANET Smart Discovery Utility for deployment management