IGS-10080MFT – Planet 8-Port SFP with 2-Port TP Industrial Switch

Part Number: IGS-10080MFT Categories , , ,

The IGS-10080MFT is an Industrial 10-Port Full Gigabit Managed Ethernet Switch specially designed to build a full Gigabit backbone to transmit reliable, high speed data in heavy industrial demanding environments and also can forward data to remote network through fiber optic. It provides two 100/1000/2500BASE-X and six 100/1000BASE-X SFP fiber optic ports, two extra 10/100/1000BASE-T copper interfaces delivered in an IP30 rugged  case with redundant power system. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-10080MFT can be placed in almost any harsh environment.

Physical Port

  • 2 10/100/1000BASE-T Ethernet ports (Port 1 to port 2)
  • 2 100/1000/2500BASE-X mini-GBIC SFP ports (Port 3 to port 4)
  • 6 100/1000BASE-X mini-GBIC SFP ports (Port 5 to port 10)

Industrial Case / Installation

  • IP30 Aluminum case protection
  • DIN-Rail and Wall Mount Design
  • Redundant Power Design
    -AC 24V power adapter acceptable
  • Supports EFT protection 6000 VDC for power line
  • Supports 6000 VDC Ethernet ESD protection
  • -40 to 75 Degree C operation temperature

Layer 2 Features

  • Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
  • High performance of Store-and-Forward architecture and runt/CRC filtering eliminate erroneous packets to optimize the network bandwidth
  • Storm Control support
    – Multicast / Unknown-Unicast
  • Supports VLAN
    – IEEE 802.1Q Tagged VLAN
    – Up to 255 VLANs groups, out of 4095 VLAN IDs
    – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    – Private VLAN
    – Protocol-Based VLAN
    – MAC-Based VLAN
    – Voice VLAN
  • Supports Spanning Tree Protocol
    – STP, IEEE 802.1D Spanning Tree Protocol
    – RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
    – MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
    – BPDU Guard
  • Supports Link Aggregation
    – 802.3ad Link Aggregation Control Protocol (LACP)
    – Cisco ether-channel (Static Trunk)
    – Maximum 5 trunk groups, up to 10 ports per trunk group
    – Up to 20Gbps bandwidth(Duplex Mode)
  • Provides Port Mirror (many-to-1)
  • Port Mirroring to monitor the incoming or outgoing traffic on a particular port
  • Supports E.R.P.S. (Ethernet Ring Protection Switching, *Function to expect in future)

Quality of Service

  • Ingress Shaper and Egress Rate Limit per port bandwidth control
  • 8 priority queues on all switch ports
  • Traffic classification
    – IEEE 802.1p CoS
    – IP TOS / DSCP / IP Precedence
    – IP TCP/UDP port number
    – Typical network application
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports QoS and In/Out bandwidth control on each port
  • Traffic-policing policies on the switch port
  • DSCP remarking


  • Supports IGMP Snooping v1, v2 and v3
  • Supports MLD Snooping v1 and v2
  • Querier mode support
  • IGMP Snooping port filtering
  • MLD Snooping port filtering
  • MVR (Multicast VLAN Registration)


  • IEEE 802.1x Port-Based / MAC-Based network access authentication
  • Built-in RADIUS client to co-operate with the RADIUS servers
  • TACACS+ login users access authentication
  • RADIUS / TACACS+ users access authentication
  • IP-Based Access Control List (ACL)
  • MAC-Based Access Control List
  • Source MAC / IP address binding
  • DHCP Snooping to filter un-trusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guard prevents IP spoofing attacks
  • Loop Protection
  • IP address access management to prevent unauthorized intruder


  • Switch /Management Interfaces
    – Web switch management- Remote Telnet management- SNMP v1, v2c, and v3 switch management- SSH / SSL secure access
  • Four RMON groups (history, statistics, alarms, and events)
  • IPv6 IP Address / NTP / DNS management
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • Firmware upload/download via HTTP / TFTP
  • DHCP Relay
  • DHCP Option82
  • User Privilege levels control
  • NTP (Network Time Protocol)
  • PTP (Precision Time Protocol)
  • Link Layer Discovery Protocol (LLDP) Protocol
  • Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
  • Reset button for system reboot or reset to factory default
  • PLANET Smart Discovery Utility for deploy management
Hardware Specification
SFP/mini-GBIC Slots8 100/1000Base-SX/LX mini-GBIC SFP slots
Copper Ports2 10/100/1000Base-T Ethernet interface
Switch ArchitectureStore-and-Forward
Switch Fabric20Gbps / non-blocking
Throughput (packet per second)14.8Mpps
Address Table8K entries, automatic source address learning and ageing
Flow ControlIEEE 802.3x Pause Frame for Full-Duplex. Back pressure for Half-Duplex
Jumbo Frame9Kbytes
Reset Button< 5 sec: System reboot > 5 sec: Factory Default
ESD Protection6KV DC
EFT Protection6KV DC
EnclosureIP30 Aluminum Metal Case
InstallationDIN Rail Kit and Wall Mount Kit
AlarmOne relay output for power fail Alarm Relay current carry ability: 1A @ DC 24V
LED IndicatorsSystem: Power 1 (Green) Power 2 (Green) Fault Alarm (Green) Ring (Green) * R.O. (Green) * Per 10/100/1000T RJ-45 Ports: 1000 (Green) 10/100, LNK/ACT (Orange) Per SFP Interface: 1000 LNK/ACT(Green) 100 LNK/ACT (Orange)
Dimension (W x D x H)72 x 107 x 152mm
Power RequirementDC 12 to 48V, AC 24V Power Adapter
Power Consumption13.92 Watts / 47.76BTU (Full loading)
Layer 2 function
Basic Management InterfacesWeb Browser, Remote Telnet, SNMP v1, v2c
Secure Management InterfaceSSH, SSL, SNMP v3
Port configurationPort disable/enable Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection Auto-Detection / Forced 100/1000Mbps SFP Fiber transceiver speed Flow Control disable / enable Power saving mode control
Port StatusDisplay each port’s speed duplex mode, link status, Flow control status, Auto negotiation status, trunk status
Port MirroringTX / RX / Both Many to 1 monitor
E.R.P.S. Ring *Recovery time <20ms
VLAN802.1Q Tagged Based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN MAC-Based VLAN Protocol-Based VLAN Voice VLAN MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4095 VLAN IDs
Link AggregationIEEE 802.3ad LACP / Static Trunk Supports 5 groups of 10-Port trunk
QoSTraffic classification based, Strict priority and WRR 8-Level priority for switching – Port Number – 802.1p priority – 802.1Q VLAN tag – DSCP field in IP Packet
IGMP SnoopingIGMP (v1/v2/V3) Snooping, up to 255 multicast Groups IGMP Querier mode support
MLD SnoopingMLD (v1/v2) Snooping, up to 255 multicast Groups MLD Querier mode support
Access Control ListIP-Based ACL / MAC-Based ACL Up to 256 entries
Bandwidth ControlPer port bandwidth control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps
SNMP MIBsRFC-1213 MIB-II RFC-2236 IGMPv2 RFC-2710 MLDv1 RFC-3376 IGMPv3 RFC-2879 RMON 1, 2, 3, 9 RFC-1493 Bridge MIB RFC-1643 Ethernet MIB RFC-2863 Interface MIB RFC-2665 Ether-Like MIB RFC-2819 RMON MIB (Group 1, 2, 3 and 9) RFC-2737 Entity MIB RFC-2618 RADIUS Client MIB RFC3411 SNMP-Frameworks-MIB IEEE 802.1X PAE IF-MIB LLDP MAU-MIB
Standards Conformance
Regulation ComplianceFCC Part 15 Class A, CE
Stability TestingIEC60068-2-32 (Free fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration)
Standards ComplianceIEEE 802.3 10Base-T IEEE 802.3u 100Base-TX / 100Base-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x Flow Control and Back pressure IEEE 802.3ad Port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of service IEEE 802.1Q VLAN Tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP
Temperature:-40 ~ 75 degree C
Relative Humidity:5 ~ 95 % (non-condensing)
Temperature:-40 ~ 75 degree C
Relative Humidity:5 ~ 95 % (non-condensing)
* Remark: function to expect in future