IGS-10020MT – Planet 8-Port Gigabit Industrial Switch with 2-Port SFP

Physical Port

• 8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
• 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection

Industrial Case and Installation

• IP30 aluminum case protection
• DIN-rail or wall-mount design
• Redundant power design
  – 12 to 48V DC, redundant power with polarity reverse protect function
  – AC 24V power adapter acceptable
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature

Industrial Protocol

• Modbus TCP for real-time monitoring in  SCADA system
• IEEE 1588v2 PTP (Precision Time Protocol)

Layer 2 Features

• High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Storm Control support
  – Broadcast, Multicast and Unknown Unicast
• Supports VLAN
  – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) – Private VLAN Edge (PVE)
  – Protocol-based VLAN – MAC-based VLAN
  – Voice VLAN
  – GVRP (GARP VLAN Registration Protocol)
• Supports Spanning Tree Protocol
  – IEEE 802.1D Spanning Tree Protocol (STP) – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN – BPDU Guard
• Supports Link Aggregation
  – 802.3ad Link Aggregation Control Protocol (LACP)
  – Cisco ether-channel (static trunk) – Maximum 5 trunk groups, up to 10 ports per trunk group
  – Up to 20Gbps bandwidth (duplex mode)
• Provides port mirror (many-to-1)
• Port mirroring to monitor the incoming or outgoing traffic on a particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• Compatible with Cisco Uni-directional link detection (UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices
• Link Layer Discovery Protocol (LLDP)

Layer 3 IP Routing Features

• Supports maximum 32 static routes and route summarization

Quality of Service

• Ingress Shaper and Egress Rate Limit per port bandwidth control
• 8 priority queues on all switch ports
• Traffic classification
  – IEEE 802.1p CoS – IP TOS/DSCP/IP precedence
  – IP TCP/UDP port number
  – Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic-policing on the switch port
• DSCP remarking

Multicast

• Supports IPv4 IGMP Snooping v1, v2 and v3
• Supports IPv6 MLD Snooping v1 and v2
• Querier mode support
• IPv4 IGMP Snooping port filtering
• IPv6 MLD Snooping port filtering
• MVR (Multicast VLAN Registration)

Security

• Authentication
  – IEEE 802.1x Port-based/MAC-based network access authentication
  – Built-in RADIUS client to cooperate with the RADIUS servers
  – TACACS+ login users access authentication
  – RADIUS/TACACS+ users access authentication

• Access Control List
  – IP-based Access Control List (ACL) – MAC-based Access Control List

• Source MAC/IP address binding
• DHCP snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized intruder

Management

• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
  – Telnet Command Line Interface
  – Web switch management
  – SNMP v1 and v2c switch management
  – SSH/TLS and SNMP v3 secure access
• SNMP Management
  – Four RMON groups (history, statistics, alarms, and events)
  – SNMP trap for interface Link Up and Link Down notification
• IPv6 IP address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
  – Firmware upload/download via HTTP/TFTP
  – Reset button for system reboot or reset to factory default
  – Dual Images
• DHCP Relay and DHCP Option 82
• DHCP Server
• User Privilege levels control
• Network Time Protocol (NTP)
• SFP-DDM (Digital Diagnostic Monitor)
• Network Diagnositc
  – ICMPv6/ICMPv4 Remote Ping
  – Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
• PLANET Smart Discovery Utility for deployment management