Home>Industrial>Network Switches>IFGS-1022HPT – Planet Industrial 8-Port 10/100TX 802.3at PoE + 2-Port Gigabit Combo Ethernet Switch
IFGS-1022HPT – Planet Industrial 8-Port 10/100TX 802.3at PoE + 2-Port Gigabit Combo Ethernet Switch
Part Number:
IFGS-1022HPT
Categories Industrial, Network Switches, PoE, PoE Switches, PoE Switches, Switches, Switches
Planet IFGS-1022HPT is an Industrial, DIN-rail Unmanaged Fast Ethernet PoE+ Switch with 8 10/100 Ethernet ports featuring 30-watt 802.3at PoE, and 2 Gigabit copper/SFP combo interfaces for Gigabit Ethernet. IFGS-1022HPT is designed with redundant power system and allows a total PoE budget of up to 240 watts for different kinds of PoE applications.
- Key Features
- Specifications
- Applications
Physical Port
- Eight 10/100BASE-TX Fast Ethernet RJ45 ports with IEEE 802.3at/af PoE+ Injector (Port-1 to Port-8)
- Two 10/100/1000BASE-T Gigabit Ethernet RJ45 ports (Port-9 and Port-10)
- Two 1000BASE-X mini-GBIC/SFP slots for SFP type auto detection (Port-9 and Port-10)
Power over Ethernet
- Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
- Backward compatible with IEEE 802.3af Power over Ethernet
- Up to 8 ports of IEEE 802.3af/802.3at devices powered
- 240-watt PoE budget
- Supports PoE power up to 30 watts for each PoE port
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100 meters
Industrial Case and Installation
- IP30 metal case
- DIN rail and wall-mount design
- 48~56V DC, redundant power with polarity reverse protect function
- Supports 6000V DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
Switching
- Hardware-based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI/MDI-X
- Features Store-and-Forward mode with wire-speed filtering and forwarding rates
- IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
- 16K MAC address table size
- 10K jumbo frame
- IEEE 802.1Q VLAN transparency
- Hardware DIP switch for “Standard” and “Extend” mode selection; the “Extend” mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps
- Automatic address learning and address aging
- Supports CSMA/CD protocol
Hardware Specifications | |
---|---|
Fast Ethernet Copper Ports | Eight 10/100BASE-TX RJ45 auto-MDI/MDI-X ports (Port-1 to Port-8) |
Gigabit Ethernet Copper Ports | Two 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports (shared with Port-9 and Port-10) |
SFP/mini-GBIC Slots | Two 1000BASE-SX/LX/BX SFP interfaces (shared with Port-9 and Port-10) |
PoE Injector Port | Eight ports with 802.3af/802.3at PoE+ injector function (Port-1 to Port-8) |
Switch Architecture | Store-and-Forward |
Switch Fabric | 5.6Gbps/non-blocking |
Switch Throughput@64 bytes | 4.1Mpps @64 bytes |
MAC Address Table | 16K entries |
Shared Data Buffer | 4Mb SRAM |
Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
Jumbo Frame | 10 Kbytes |
DIP Switch (Port-1 to Port-8) | Standard mode: 30-watt PoE transmit distance of 100m at speed of 10/100Mbps Extend mode: 30-watt PoE transmit distance of 250m at speed of 10Mbps |
LED | 3 x LED for System and Power: ■ Green: DC Power 1 ■ Green: DC Power 2 ■ Red : Power Fault Alarm 2 x LED for PoE Copper Port (Port-1~Port-8): ■ Green: LNK/ACT (10/100Mbps) ■ Orange: PoE-In-Use 2 x LED for 10/100/1000T Copper Port (Port-9~Port-10): ■ Green: LNK/ACT ■ Orange: 1000 2 x LED for per mini-GBIC interface (Port-9~Port-10) ■ Orange: LNK/ACT ■ Green: 1000 |
Connector | Removable 6-pin terminal block ■ Pin 1/2 for Power 1 ■ Pin 3/4 for power fault alarm ■ Pin 5/6 for Power 2 |
Alarm | One relay output for power failure. Alarm relay current carry ability: 1A @ 24V AC |
Power Requirements | 48~56V DC, 5.5A (max.) (>51V DC for PoE+ output recommended) |
Power Consumption/ Dissipation | 6.4 watts, 21BTU (Standby without PoE function) at DC 56V power input 8.2 watts, 27BTU (Full loading without PoE function) at DC 56V power input 241 watts, 832BTU (Full loading with PoE function) at DC 56V power input |
Dimensions (W x D x H) | 76.8 x 107.3 x 152 mm |
Weight | 1034g |
ESD Protection | 6KV DC |
Enclosure | IP30 aluminum case |
Installation | DIN-rail kit and wall-mount kit |
Power over Ethernet | |
PoE Standard | IEEE 802.3at Power over Ethernet Plus/PSE |
PoE Power Supply Type | End-span |
Power Pin Assignment | 1/2(+), 3/6(-) |
PoE Power Output | IEEE 802.3af Standard – Per port 48V~51V DC (depending on the power supply), max. 15.4 watts IEEE 802.3at Standard – Per port 51V~56V DC (depending on the power supply), max. 30 watts |
PoE Power Budget | Dual power input: maximum 240W (depending on power input) |
Max. Number of Class 2 PDs | 8 |
Max. Number of Class 3 PDs | 8 |
Max. Number of Class 4 PDs | 8 |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Stability Testing | IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) |
Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3z Gigabit SX/LX IEEE 802.3x Flow Control and Back Pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus |
Environment | |
Operating Temperature | -40 ~ 75 degrees C |
Storage Temperature | -40 ~ 85 degrees C |
Humidity | 5 ~ 95% (non-condensing) |
Ordering Information | |
---|---|
IFGS-1022HPT | Industrial 8-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/ SFP combo Ethernet Switch (-40~75 degrees C) |
Optional Accessories | |
---|---|
PWR-240-48 | 240W 48V DC Single Output Industrial DIN-rail Power Supply (-20 ~ 70 degrees C) |
PWR-480-48 | 480W 48V DC Single Output Industrial DIN-rail Power Supply (-20 ~ 70 degrees C) |