GSW-2824P – Planet 24-Port Combo Ethernet Switch

Part Number: GSW-2824P Categories , , , ,

The PLANET GSW-2824P is equipped with 24 10/100/1000BASE-T Gigabit Ethernet ports, 2 extra Gigabit TP ports and 2 1000BASE-X SFP combo interfaces with the inner power system. With a total of 250 watts of PoE budget, it features high-performance Gigabit IEEE 802.3af PoE (up to 15.4W) and IEEE 802.3at PoE+ (up to 32W) capabilities on all ports.

Physical Port

  • 24-port 10/100/1000BASE-T RJ45 copper with PoE injector function
  • 4 10/100/1000BASE-T RJ45 copper interfaces
  • 2 1000BASE-X SFP combo interfaces, shared with Ports 27~28


Power over Ethernet

  • Complies with IEEE 802.3at Power over Ethernet Plus end-span PSE
  • Up to 24 ports of IEEE 802.3af / 802.3at devices powered (ports 1~24)
  • Supports PoE power up to 32 watts for each PoE port, with a total PoE budget of 250W.
  • Each port supports 54V DC power to PoE powered device.
  • Auto detects powered device (PD)
  • Supports PD alive function.
  • Circuit protection prevents power interference between ports.
  • Remote power feeding up to 100m in standard mode with 250m in extend mode



  • Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Supports IEEE802.3x flow control in full-duplex mode and backpressure in half-duplex mode
  • Integrates address look-up engine, supporting 8K absolute MAC addresses
  • 9K jumbo frame supports all speeds (10/100/1000Mbps)
  • Hardware-based DIP switch for Standard, VLAN or Extend mode selection;
    • VLAN mode: Ports 1~24 cannot communicate with each other, but can communicate with the uplink ports 25~28 and SFP ports 27~ 28
    • Extend mode: Ports 1~8 have data rate of 10Mbps. The farthest transmission distance is up to 250 meters and all ports can communicate with each other.
  • VLAN mode is to isolate ports to prevent broadcast storm and defend DHCP spoofing
  • Automatic address learning and address aging



  • 19-inch rack-mount size, 1U height
  • LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
  • 2 fans to provide stable and efficient power performance
  • Supports contact discharge of ±6KV DC and air distance discharge of ±8KV DC for Ethernet ESD protection
  • Supports  ±6KV surge immunity
Hardware Specifications
10/100/1000BASE-T Copper Ports28 auto MDI/MDIX
1000BASE-X SFP/mini-GBIC Slots2
DIP SwitchSelectable operation mode
– Standard
– Extend
Dimensions (W x D x H)441.5 x 207.3 x 44 mm (1U height)
Power Requirements100~240V AC, 50/60Hz, 5A max.
Power Consumption/DissipationMax. 278 watts/948 BTU
Thermal Fan2
ESD ProtectionContact discharge of ±6KV DC,
Air discharge of ±8KV DC
Surge Protection±6KV
InstallationDesktop or rack-mount installation
LED IndicatorsSystem
Power (Green)
10/100/1000T RJ45 Interfaces
10/100 LNK / ACT(Amber)
1000 LNK / ACT (Green)
1000X SFP Interfaces
1000 LNK / ACT (Green)
Switch ArchitectureStore-and-Forward
Switch Fabric56Gbps
Switch Throughput@64bytes41.66Mpps
MAC Address Table8K entries
Jumbo Frame9216 bytes
Flow ControlIEEE 802.3x pause frame for full duplex; back pressure for half duplex
Power over Ethernet
PoE StandardIEEE 802.3at Power over Ethernet Plus/PSE
PoE Injector Ports24
PoE Power Supply TypeEnd-span: 1/2 (+), 3/6 (-)
PoE Power OutputPer port 54±1V DC, 300mA. max. 15.4 watts (IEEE 802.3af)
Per port 54±1V DC, 600mA. max. 32 watts (IEEE 802.3at)
PoE Power Budget250 watts
Number of PDs, 7 watts24
Number of PDs, 15.4 watts16
Number of PDs, 30 watts8
Standards Conformance
Regulatory ComplianceFCC Part 15 Class A, CE
Standards ComplianceIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3z Gigabit SX/LX
IEEE 802.3x flow control and back pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy Efficient Ethernet
OperatingTemperature: 0 ~ 50 degrees C
Relative Humidity: 5~ 95% (non-condensing)
StorageTemperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)