GS-5220-8UP2T2X – Planet L3 8-Port 10/100/1000T 802.3bt PoE + 2-Port 10/100/1000T + 2-Port 10G SFP+ Managed Switch

Part Number: GS-5220-8UP2T2X Categories , ,

The GS-5220-8UP2T2X Layer 3 Managed Gigabit Switch supports both IPv4 and IPv6 protocols and Layer 3 OSPFv2 dynamic routing and static routing, and provides 8 10/100/1000BASE-T ports featuring 95-watt 802.3bt PoE++, 2 additional Gigabit copper ports and another 2 extra 1/10 Gigabit BASE-X SFP+ fiber slots. Each of the eight Gigabit ports provides 95 watts of power, with a total power budget of up to 240 watts for the different types of PoE applications being employed.

Physical Port

  • 8-port 10/100/1000BASE-T with 95W PoE injector
  • 2-port 1/10G BASE-X SFP+
  • RS-232 RJ45 console interface for switch basic management and setup

Power over Ethernet 

  • Up to 8 ports of IEEE 802.3af/802.3at/802.3bt devices powered
  • Supports PoE Power up to 95 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters in standard mode and 250m in extend mode
  • PoE Management
    – PoE Port Status monitoring
    – Over Temperature Protection
    – PoE usage threshold
    – Temperature threshold
    – Per port PoE function enable/disable
    – PoE Port Power feeding priority
    – Per PoE port power limit
    – PD classification detection
    – Sequence port PoE
Hardware Specifications
Copper Ports10 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X interface with Port-1 to Port-10
Copper Ports10 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X interface with Port-1 to Port-10
SFP/mini-GBIC Slots2 x 1/10G BASE-X SFP interfaces with Port-11 to Port-12
PoE Injector Port8 ports with 802.3bt/at/af PoE injector function with Port-1 to Port-8
Console1 x RJ45 serial port (115200 , 8, N, 1)
Switch ArchitectureStore-and-Forward
Switch Fabric60Gbps/non-blocking
Throughput44.642Mpps@ 64Bytes packet
Address Table16K entries, automatic source address learning and aging
Shared Data Buffer16Mbits
Flow ControlIEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame9KB
Fan Alert (RED), Ring (Green), SYS (Green), PWR (Green)
10/100/1000BASE-T RJ45 Interfaces (Port 1 to Port 10):
1000Mbps LNK/ACT (Green)
10/100Mbps LNK/ACT (Orange)
802.3bt PoE-in-Use (Green) (Port 1 to Port 8)
802.3at/af PoE-in-Use (Orange) (Port 1 to Port 8)
1/10G Mbps SFP Interfaces (Port 11 to Port 12):
1G LNK/ACT (Green)
10G Mbps (Orange)
Power Requirements100~240V AC, 50/60Hz
Power Consumption (Full Loading)258 watts/880BTU (max.)
ESD Protection6KV DC
Dimensions (W x D x H)330 x 200 x 43.5 mm, 1U height
Power over Ethernet
PoE Standard802.3bt PoE++ PSE
Backward compatible with IEEE 802.3at PoE PSE
PoE Power Supply Type802.3bt
PoE Power OutputPer port 52V DC
802.3bt mode, Port-1 to Port-8: maximum 90 watts
UPoE mode, Port-1 to Port-8: maximum 95 watts
Force mode, Port-1 to Port-8: maximum 60 watts
End-span mode: maximum 36 watts
Mid-span mode: maximum 36 watts
Power Pin Assignment802.3bt: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
UPoE: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
End-span: 1/2(-), 3/6(+)
Mid-span: 4/5(+), 7/8(-)
PoE Power Budget240 watts (max.) @ 25 degrees C
200 watts (max.) @ 50 degrees C
Number of 90W 802.3bt Type-4 PDs2
Number of 60W 802.3bt Type-3 PDs4
Number of 802.3at PDs8
PoE Functions
PoE System ManagementSystem PoE Admin control
Total PoE power budget control
PoE Legacy mode
PoE usage threshold alarm
PoE Port ManagementPort Enable/Disable/Schedule
PoE mode control
– 802.3bt
– UPoE
– 802.3at End-span
– 802.3at Mid-span
Force mode
Port Priority
PoE Extend ModePer PoE port, max. 160 to 250 meters
PoE Device Live DetectionPer port remote PD IP address
4 actions
– None
– PD reboot
– PR reboot and alarm
– Alarm
PoE Power RecycleYes, daily or predeinded schedule
PoE Schedule4 schedule profiles
Layer2 Functions
Port ConfigurationPort disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow Control disable/enable
Port StatusDisplay each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status
Port MirroringTX/RX/Both
Many-to-1 monitor
VLAN802.1Q tagged based VLAN, up to 255 VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4094 VLAN IDs
Link AggregationIEEE 802.3ad LACP/Static Trunk
Supports 6 trunk groups with 4 ports per trunk
QoSTraffic classification based, strict priority and WRR
8-level priority for switching
– Port number
– 802.1p priority
– 802.1Q VLAN tag
– DSCP/TOS field in IP packet
IGMP SnoopingIPv4 IGMP (v1/v2/v3) snooping
IPv4 IGMP querier mode support
Supports 255 IGMP groups
MLD SnoopingIPv6 MLD (v1/v2) snooping,
IPv6 MLD querier mode support
Supports 255 MLD groups
Access Control ListIP-based ACL/MAC-based ACL
ACL based on:
– MAC Address
– IP Address
– Ethertype
– Protocol Type
– 802.1p Priority
Up to 256 entries
Bandwidth ControlPer port bandwidth control
Ingress: 10Kbps~13000Mbps
Egress: 10Kbps~13000Mbps
Basic Management InterfacesConsole; Telnet; Web browser; SNMP v1, v2c
Secure Management InterfacesSSHv2, TLS v1.2, SNMP v3
Management FunctionsFirmware upgrade by HTTP/TFTP protocol through Ethernet network
Remote syslog and local system log
LLDP protocol
ONVIFONVIF device discovery
ONVIF device monitoring
Floor Map
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2737 Entity MIB
RFC 2819 RMON MIB (Groups 1, 2, 3 and 9)
RFC 2618 RADIUS Client MIB
RFC 3411 SNMP-Frameworks-MIB
RFC 3621 Power Ethernet MIB
Standards Conformance
OperatingTemperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
StorageTemperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)