Ajax Fibra Transmitter
- Key Features
- Specifications
- Applications
Fibra wired communication encryption, two-way communication, TDMA, Power adjustment.
Any Connection Type with NO, NC, EOL or 3EOL Connection
Instant detection of wired device connection loss
Installation inside the device enclosure
KeyArm feature for integrated third-party device
Integration of roller shutter motion detector
Numerous event types for the integrated device
12v, mA power spply for integrated device
Fast connection to wired device by measurement of EOL resistors
Up to 2,000m range of communication with an Ajax hub or a module that extends the Fibra line
Convenient wire connection due to accessory 5-pin cable
Remote control and configuration
Informative in-app notifications
Chime for shops, commercial and non-commercial facilities
Low power consumption
Compatibility | Hub Hybrid (2G) Hub Hybrid (4G)
|
Communication
| Fibra communication technology Proprietary wired communication technology. Fibra combines the reliability of wires with the freedom of radio connection. Key features:
Line connection 4-core cable
Connection to any point of the Fibra line Transmitter Fibra can be installed after a hub, detector, keypad, or siren.
Fibra line length up to 2,000 m When using the U/UTP cat.5 twisted pair cable.
Encrypted communication All stored and transmitted data are protected by block encryption featuring a dynamic key.
|
Wired devices connection
| Supported configurations
Connector pins
Transmitter Fibra has 2 inputs (Z1 and Z2) to connect the wired detector using the AATT (i.e., Alarm Alarm Tamper Tamper) scheme. Type of connection NO, NC, EOL, 2EOL, 3EOL With EOL total resistance from 1 kΩ to 40 kΩ with a 100 Ω increment.
Cable length up to 3 m When using a signal cable with a 0.22 mm² copper conductor.
Operation mode pulse, bistable
Event types 15 event types of wired devices
Adjusted by a PRO or a user with admin rights in the Ajax app.
|
Recommendations
| Transmitter Fibra should be installed inside the wired detector case. The module requires a space with the following minimum dimensions: 40 × 15 × 12.2 mm |
Sabotage protection
| Protection against spoofing device authentication
Instant line damage detection Valid for EOL, 2EOL, or 3EOL connections.
Communication loss detection after 36 s Between the hub and Transmitter Fibra. It can be changed in the hub settings.
|
Power supply
| Fibra line 7–30 V⎓, up to 200 mA The hub powers the module.
Output to the connected wired device 10.5–15 V⎓, up to 50 mA (total maximum current consumption) One power supply line from Transmitter Fibra.
|
Board
| Dimensions 40 × 15 × 12.2 mm
Weight 6 g
Operating temperature range from −25 °C to +50 °C
Operating humidity up to 75%
Electric shock protection Class II
|
Complete set
| Transmitter Fibra Accessory 5-pin cable Quick start guide
|