Categories

Ajax Fibra Multitransmitter White

Part Number: AJ-F-MULTI-W Categories , ,

Ajax Fibra MultiTransmitter is a wired integration module that allows for third-party wired devices to be connected to an Ajax system. With this module, security companies can complement an Ajax system with nearly any device to build comprehensive security solutions for projects of various complexity. Also, the module provides an outdated yet functional alarm setup with all the benefits of the modern Ajax ecosystem, which is more cost-efficient than an upgrade

Wired Fibra Communication

Up to 2,000m Fibra line connection

3 independent 12V⎓ power lines for fire and intrusion detectors

Instant detection of wired connection loss (EOL)

18 zones for connecting detectors: NO, NC, EOL, 2EOL, 3EOL

Two Colours Black and White

Numerous event types of wired devices

Data rich notifications

Place for 12V⎓ backup battery 4 or 7Ah

Remote control and setup

Energy consumption from Fibra line up to 100µA

CompatibilityHub Hybrid (2G)

Hub Hybrid (4G)

 

Range Extenders: No

Communication

 

Fibra communication technology

Proprietary wired communication technology. Fibra combines the reliability of wires with the freedom of radio connection.

Key features:

  • Two-way communication.
  • Advanced sabotage protection.
  • Instant notifications.
  • Remote control and configuration via Ajax apps.

 

Line connection

4-core cable

 

Fibra line length

up to 2,000 m

When the U/UTP cat.5 twisted pair cable is used.

 

Encrypted communication

All stored and transmitted data are protected by block encryption featuring a dynamic key.

 

 

Wired devices connection

 

Number of zones

18 wired zones

Multiple devices can be connected to one zone. The number of connected devices depends on their power consumption.

 

Type of connection

NC, NO, EOL, 2EOL, 3EOL

With EOL resistance from 1 kΩ to 30 kΩ with 100 Ω increment.

 

Cable length

up to 400 m

When a copper signal cable with a 0.22 mm² cross-sectional area of the conductor is used.

 

Operation mode

pulse, bistable

 

Event types

15 event types for wired devices are available:

  • Tamper alarm
  • Intrusion
  • Fire
  • Auxiliary alarm
  • Panic button
  • Gas alarm
  • Malfunction
  • Leakage
  • Glass break
  • High temperature
  • Low temperature
  • Masking
  • Duress code (opening)
  • Vibration (seismic sensor)
  • Custom

Adjusted by a PRO or a user with admin rights in an Ajax app.

 

Recommendations

 

The device is powered by 100–240 V~ mains and designed for indoor use only.

 

Sabotage protection

 

Tamper alarm

Two tampers detect the opening of the lid and notify of attempts to tear the device from the surface or remove it from the mount.

 

Protection against forgery

Device authentication

 

Communication loss detection

within 36 seconds

Between a hub and MultiTransmitter Fibra.

 

Instant detection of wired connection loss, short circuits, and malfunctions

when 2EOL/3EOL connection is used

Depends on the connection type.

 

Power supply

 

Main

100–240 V~

 

Backup

12 V⎓, up to 7 Ah capacity with a full charge cycle of up to 30 hours

 

Type

type A

Used inside the protected premises.

 

Operating AC voltage range

100–240 V~, 50/60 Hz

Main power supply.

 

Operating DC voltage range

10.5–15 V⎓

Backup power supply.

 

Quiescent current consumption at nominal voltage

25 mA*

 

Maximum current consumption at nominal voltage

30 mA*

* From the backup rechargeable battery after the loss of the main power supply.

 

Backup rechargeable battery capacity

up to 7 Ah with a full charge cycle of up to 30 hours**

When a 4 Ah rechargeable battery is used, the minimum operating time at a maximum load of 1.7 А is 2 hours. For autonomous operation for 12 or 24 hours, the maximum load should not exceed 0.3 A and 0.15 A, respectively.

When a 7 Ah rechargeable battery is used, the minimum operating time at a maximum load of 1.7 А is 4 hours. For autonomous operation for 12 or 24 hours, the maximum load should not exceed 0.4 A and 0.2 A, respectively.

** It is the maximum time to recharge a 7 Ah battery to 80% of its capacity.

 

Power supply of connected wired devices

10.5–15 V⎓, up to 1 A (total maximum current consumption)

Three power supply lines from MultiTransmitter Fibra.

 

Power supply of connected fire detectors

10.5–15 V⎓, up to 0.4 A

One power supply line from MultiTransmitter Fibra.

 

Low battery voltage

11.6 V⎓

 

Low battery recovery voltage

12.9 V⎓

 

End-of-life battery voltage

11 V⎓

 

Maximum output peak-to-peak ripple battery voltage

200 mV⎓

 

Minimum backup rechargeable battery energy level in the charged state

100%

 

Casing

 

Dimensions

192 × 238 × 100 mm

 

Weight of the device in a black casing

795 g

Excluding the backup rechargeable battery.

 

Weight of the device in a white casing

867 g

Excluding the backup rechargeable battery.

 

Operating temperature range

from −10°C to +40°C

 

Operating humidity

up to 75%

 

Protection class

IP30, IK06

The new casing version of MultiTransmitter Fibra has light guides for the integration module LED indication, while the previous version has the LED indicator on the board.

 

ColourWhite
Complete set

 

MultiTransmitter Fibra

 

Power cable

 

Screw terminal block adapter (for INCERT compliance only)

 

12 V battery connection cable

 

Casing (depending on the kit)

 

Installation kit

 

Quick start guide