Categories
Ajax Fibra LineSupply (45W) White
An Ajax system with Ajax Fibra LineSupply can cover a facility requiring kilometers or even tens of kilometers of wires, whether it’s a renovation or a new project. The device provides power to connected Fibra devices and extends the line length to 2,000 m more. One Fibra line can combine up to 10 LineSupply modules to boost communication length from 2 km to 22 km. This unlocks numerous possibilities in covering a large-scale object like a factory, farm, or power plant.
Fibra Wired Communication
Up to 2,000m range of communication with an Ajax hub or a module that extends the Fibra line.
Output Fibra line length upto 2,000m
Up to 10 modules on the Fibra line
Protects connected device from short circuit and overvoltage
Remote control and configuration
Convenient mounting and cable management when installed into Case
Additional power supply for the Fibra line
Informative in-app notifications
Zero power consumption from the Fibra line: The: The module is powered by 110/230 V and a backup battery
Two colours: Black and White
Backup battery with a capacity of up to 18Ah
| Compatibility | Hub Hybrid (2G)
Hub Hybrid (4G)
|
| Communication
| Fibra communication technology Proprietary wired communication technology combines the reliability of wires with the freedom of radio connection. Key features:
Line connection 4-core cable
Connection to any point of the Fibra line LineSupply (45 W) can be installed after a hub, detector, keypad, siren, or another LineSupply. The module provides additional power to Fibra devices installed between the LineSupply (45 W) and the end of the line.
Wired connection range
The maximum line length is relevant when using the U/UTP cat.5 twisted pair.
Encrypted communication All stored and transmitted data are protected by block encryption featuring a dynamic key.
|
| Line connection
| Number of input lines 1 LineSupply (45 W) can be connected after any Fibra device.
Number of output lines 1 Fibra devices with a total power consumption of up to 30 W can be connected to the output line.
Cable length up to 2,000 m For the output line between the module and the last Fibra device on the line when using U/UTP cat.5 twisted pair.
Galvanic isolation Ensures that devices connected between the LineSupply (45 W) and the end of the line do not consume power from the hub.
|
| Power supply
| Main 100–240 V~, 50/60 Hz
Backup 12 V⎓ battery with a capacity from 7 to 18 Ah Not included. When the main power is available, the backup battery is charged from the mains.
Power output
|
| Recommendations
| Power supply 100–240 V~. The device is designed for indoor use only. Installation in Case C (260) or Case D (430) is recommended. The casing is sold separately.
|
| Sabotage protection
| Tamper alarm LineSupply (45 W) has a connector to fasten the tamper board to the module. The tamper board is in Case that is sold separately.
Protection against short circuit on the line
Protection against overvoltage on the Fibra signal lines The module protects devices when voltage is applied to the signal terminals A, B.
Protection against spoofing device authentication
Communication loss detection after 36 s Between the hub and LineSupply (45 W). It can be changed in hub settings.
|
| Enclosure
| Dimensions 160 × 85 × 53 mm
Weight 456 g
Operating temperature range from –10 °C to +40 °C
Operating humidity up to 75%
Electric shock protection Class III
|
| Colour | White |
| Complete set
| LineSupply (45 W) Fibra
Power supply cable
Battery connection cable
Terminal adapter — 2 pcs.
Quick start guide
|
