Categories
Ajax Fibra Lineprotect
Ajax Fibra LineProtect is a module to protect the Fibra line and devices from electrical sabotage. If an intruder tries to damage the security system and, for example, hits the StreetSiren Fibra with a stun gun, LineProtect will take the hit. All devices between LineProtect and the hub will continue to operate. The module can be installed at any point of the Fibra line. The output line from LineProtect can be up to 2000 meters in length. LineProtect inherits all the advantages of Ajax smart devices: it is easy to control the module from the app, receive event notifications, and configure or test LineProtect remotely.
Fibra wired communication
Up to 2,000m distance of wired communication with an Ajax hub
Length of Fibra line: up to 2,000m for LineProtect output
Protection from short circuit
Informative in-app notifications
Remote control and configuration
Low power consumption up to 0.17W
Can be installed at any point of the Fibra line
Tamper alarm
| Compatibility | Hub Hybrid (2G) Hub Hybrid (4G)
Range Extenders: No |
| Communication
| Fibra communication technology Proprietary wired communication technology. Fibra combines the reliability of wires with the freedom of radio connection. Key features:
Line connection 4-core cable
Connection to any point of the Fibra line LineProtect can be installed behind the hub, detector, keypad, or siren. The module protects devices installed on the Fibra line between LineProtect and the hub, as well as the hub itself. It does not protect devices between the module and the end of the line.
Fibra line length up to 2,000 m When using the U/UTP cat.5 twisted pair cable.
Encrypted communication
|
| Lines connection
| Number of output lines 1 LineProtect can be installed behind any Fibra device.
Number of input lines 1 The number of Fibra devices connected to the output line depends on their energy consumption.
Cable length up to 2,000 m When using the U/UTP cat.5 twisted pair cable.
|
| Lines protection
| Voltage supply 110/230 V~ Fuses are triggered if an abnormal voltage is supplied on the Fibra line. After that LineProtect needs to be replaced.
Short circuit on the line
Hit by the stun gun
Overvoltage on the Fibra signal lines The module protects devices when voltage is supplied to A and B signal terminals.
Notifications The device distinguishes the intervention type, and the system sends the corresponding notification to the users and the security company.
Alert with a siren The siren indicates with the buzzer and LED frame, if the output line alarm is detected.
|
| Recommendations
| For indoor use only. It is recommended to install it in Case that is sold separately and available in several options. |
| Module protection
| Tamper alarm LineProtect has a connector to fasten the tamper board to the module. The tamper board is in Case that is sold separately.
Protection against spoofing device authentication
Lost connection detection after 36 s Between the hub and LineProtect. It can be changed in hub settings.
|
| Power supply
| Fibra line power supply 5.7−30 V⎓, up to 7 mA The hub powers the module.
|
| Board
| Dimensions 90 × 50 × 15 mm
Weight 28 g
Operating temperature range from −10°C to +40°C
Operating humidity up to 75%
|
| Complete set
| LineProtect Fibra
Quick start guide
|
