Categories
Ajax Fibra DoorProtect Black
Ajax DoorProtect Fibra is a wired opening detector. Designed for indoor use. Supports connection of a third-party NC detector.
DoorProtect Fibra is a wired opening detector. The detector is connected to the hub with a wire and operates using the Fibra protocol. In case of standard installation, it consists of two blocks: a detector and a magnet. The detector is mounted on a frame or fixed part of the structure, and the magnet is mounted on a movable flap or a sliding part.
The sensitive element of the detector is a reed switch (sealed contact). This is a small flask with an open contact group inside. When a magnet is brought to the detector, a magnetic field is generated and the detector contacts are magnetized, attracted, and closed. Opening the flap or door moves the magnet away from the reed switch, which opens the circuit, and the detector detects opening.
It takes a single magnet for the DoorProtect Fibra detector to create a magnetic field. Use a small or large magnet depending on the conditions at the installation site.
DoorProtect Fibra has two reed switches, which allows you to install a magnet on both the left and right side of the detector. Note that DoorProtect Fibra works with one magnet on one side only. If magnets are installed on both sides, the detector will not detect opening correctly.
The DoorProtect Fibra detector in the armed mode, when triggered, transmits an alarm signal to the hub in 0.15 seconds, activates the sirens connected to the hub, and notifies the user and the security company.
| Devices compatibility
| Hubs Hub Hybrid (2G) Hub Hybrid (4G)Range extenders No |
| Communication
| Fibra communication technology Proprietary wired communication technology. It features:
Line connection Fibra line length Encrypted communication |
| Detection
| Sensing element 2 × reed switch The magnet can be installed to the right or left side of the detector.Additional detector connection Wired detector with the normally closed (NC) contact type. |
| Recommendations
| Do not install the detector using both magnets at the same time.The detector recognizes only one magnet on one side of the detector — left or right. The device is designed for indoor use only. |
| Anti-sabotage protection
| Tampering alarm Alerts of attempts to detach the detector from the surface or remove the mounting panel.Protection against forgery Device authentication |
| Power supply
| Detector’s operating voltage range 5−30 V⎓, up to 23 mW The detector is powered by the control panel.Detector’s nominal operating voltage 24 V⎓Quiescent detector’s current consumption at nominal voltage 0.044 mA Maximum detector’s current consumption at nominal voltage |
| Enclosure
| Dimensions 90.5 × 21 × 18.5 mmWeight 54 gOperating temperature range from −10 °C to +40 °C Operating humidity Protection class |
| Colour
| Black |
| Complete set
| DoorProtect Fibra Big magnet Small magnet Installation kit Quick start guide
|
