Ajax Fibra Case D (430) White
Ajax Fibra Case D (430) with dimensions of 430 × 400 × 133 mm has 8 slots for LineProtect Fibra, LineSplit Fibra, MultiRelay Fibra, LineSupply Fibra, Hub Hybrid (2G)1, or Hub Hybrid (4G)1 and two up to 18 Ah batteries.
- Key Features
- Specifications
- Applications
Organised cable management perforations and holes for cable fixing and routing
Perfect installations: bubble level and enlarged mounting holes
Sabotage protection with tamper alarm
Safe hole drilling stoppers and recesses for drilling
Available in two colours: Black and White
Compatibility
| LineSplit Fibra
With batteries up to 18 Ah
With battery up to 9 Ah. Installing the hub in Case D (430) does not meet the Grade (EN 50131) requirements. The compliant version will be available soon.
|
Device installation
| Number of devices up to 8
Plastic holders Module Holder (type A) Place the required number of Module Holder (type A) into the casing to accommodate LineSplit Fibra, LineProtect Fibra, and MultiRelay Fibra modules. The Case D (430) complete set includes a total of 4 holders.
Module Holder (type B) Place two Module Holder (type B) into the casing to accommodate the Hub Hybrid board. Holders are sold separately.
Plastic rails to secure LineSupply Fibra Slide LineSupply Fibra along the rails to remove it from the casing. No holders are required to secure the module.
Cable fasteners to hold the cables together with ties
Bubble level To check the inclination angle of the casing during installation.
Recesses for drilling Ø32 mm, Ø40 mm, or Ø63 mm
Wider holes To ensure that the casing is installed correctly, even if there are errors during installation.
Holding stripe for the battery To prevent accidental dislodgement of the battery.
Holders for batteries up to 18 Ah At the bottom of the casing.
|
Key features
| Tamper board Included in the Case complete set. The tamper board connects to the appropriate device connector and protects the installed device from sabotage.
Device rotation by 180° The devices in the casing can be rotated by 180°, providing two fixation options.
Holding screws in the casing lid
Latches to secure the lid during installation The latches prevent the lid from falling off Case until it is secured with screws.
|
Recommendations
| The device is designed for indoor use only. Case is produced in several versions. |
Product
| Dimensions 430 × 400 × 133 mm
Weight of the white Case 3,381 g
Operating temperature range from −10 °C to +40 °C
Operating humidity up to 75%
|
Colour
| White |
Complete set
| Case D (430)
Tamper board
Holding stripe for a battery
Module Holder (type A) — 4 pcs.
Installation kit
Quick start guide
|