Categories
ISW-804PT-M12 - Planet 8-Port IP67 Industrial M12 PoE Switch
The Planet ISW-804PT-M12 is equipped with 8-port 10/100Base-TX auto-negotiation M12 connectors with 4-port IEEE 802.3af PoE (Port 5 to port 8), providing 15.4-watt PoE output. The M12 connectors provide tight and strong connections and guarantees stable Ethernet operation performance under high vibration and shock environment.
Physical Port
- 8-port 10/100Mbps M12 Connector with IP67 protection
- 4-port IEEE 802.3af PoE Ports (Port 5 to port 8)
Layer 2 Features
- Supports auto negotiation and 10/100Mbps half / full duplex mode
- High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
- Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
- Backplane (Switching Fabric): 1.6Gbps
- Integrated address look-up engine, supports 2K absolute MAC addresses
- Automatic address learning and address aging
- CSMA/CD Protocol
Power over Ethernet
- 4 Ports compliant with IEEE 802.3af Power over Ethernet / PSE Standard
- Supports PoE Power up to 15.4 watts for each PoE port
- Auto-detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m
Industrial Case / Installation
- IP67 aluminum metal case protection
- DIN rail and wall mount design
- Waterproof / dustproof design
- 48V DC, redundant power with polarity reverse protect function and connective removable terminal block for master and slave power
- Supports EFT 6000VDC protection for power line
- Supports ESD 6000 VDC Ethernet protection
- -40 to 75 degrees C operating temperature
| Hardware Specifications | |
|---|---|
| 10/100Base-TX Ports | 8 x M12, 4-pin D-coded female connector |
| IEEE 802.3af PoE Ports | 4, port 5 to port 8 |
| Power Connector | 1 x M12, 5-pin A-Coded male connector |
| Enclosure | IP67 Aluminum |
| Dimensions (W x D x H) | 163 x 103 x 53 mm |
| Weight | 976g |
| Power Requirements | 48V DC, redundant power with polarity reverse protection function |
| Power Consumption / Dissipation | 65 watts / 221 BTU |
| Installation | DIN rail kit and wall mount ear |
| ESD Protection | 6KV DC |
| EFT Protection | 6KV DC |
| LED Indicators | Power LED: • Power 1 / Power 2 / FAULT (Green) 10/100Base-TX Port (Port-1 to Port-8): • LNK/ACT (Green) PoE Port (Port-5 to Port-8): • PoE In-Use (Orange) |
| Network Cables | 10Base-T: 2-Pair UTP Cat.3,4,5 up to 100m (328ft) 100Base-TX: 2-Pair UTP Cat.5, 5e, 6 up to 100m (328ft) EIA/TIA-568 100-ohm STP (100m, max.) |
| Switch Specifications | |
| Switch Processing Scheme | Store-and-Forward |
| Address Table | 2K entries |
| Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
| Switch Fabric | 1.6Gbps |
| Throughput (packet per second) | 1.19Mpps@64Bytes |
| Maximum Transmit Unit | 1536 bytes |
| Standards Conformance | |
| Standards Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3af Power over Ethernet |
| Regulation Compliance | FCC Part 15 Class A, CE |
| Stability Testing | IEC60068-2-32 (Free Fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration) |
| Power over Ethernet | |
| PoE Standard | IEEE 802.3af Power over Ethernet / PSE |
| PoE Power Supply Type | End-Span |
| PoE Power Output | 48V DC per port, 350mA . max. 15.4 watts |
| Power Pin Assignment | 1/2(+), 3/6(-) |
| PoE Budget | 60 watts |
| Environment | |
| Temperature | Operating: -40~75 degrees C Storage: -40~75 degrees C |
| Humidity | Operating: 5~95% (non-condensing) Storage: 5~95% (non-condensing) |
| Standard Accessories | |
| Packet Contents | 1 x M12 4-pin D-coded male connector to RJ-45 Ethernet cable, 1.2m 1 x M12 5-pin A-coded female connector power cable, 1.2m 1 x Wall-mount kit 1 x DIN-rail kit (attached to M12 switch as default) 1 x User’s manual |
