Back

IPOE-171S – Industrial Single-Port 10/100/1000Mbps Ultra PoE Splitter

1 in stock (can be backordered)

Part Number:IPOE-171S

IN STOCK. Same day shipping available.

Interface

  • 2 RJ45 interfaces

- 1-port Data + Power input - 1-port Data output

  • 2 DC output (4-pin terminal block)
  • 1 DC 12V/24V DIP switch

Power over Ethernet

  • Complies with ultra Power over Ethernet end-span and mid-span PD
  • Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD
  • Supports PoE input power up to 110 watts
  • Splits the 50~56V DC power over RJ45 Ethernet cable into DC 12V/24V output
  • Remote power feeding up to 100 meters

Hardware

  • IP30 metal case protection
  • DIN rail and wall mount design
  • -40 to 75 degrees C operating temperature
IPOE-171S - Industrial Single-Port 10/100/1000Mbps Ultra PoE Splitter
Hardware Specifications
Interface PoE Input Port: 1 x 10/100/1000 BASE-T RJ45 “PoE (Data + Power) In” ■ Data Output Port: 1 x 10/100/1000 BASE-T RJ45 “Data Out” ■ DC Out Plug Connector: 1 removable 4-pin terminal block ■ DIP-Switch: 12V DC /24V DC output voltage
LED Indicator Power Ready: Green802.3at PoE+ In: GreenUltra PoE or 802.3bt PoE in: GreenDC 12V: OrangeDC 24V: Green
Network Cable Ultra PoE (60W/75W/95W): 4-pair UTP Cat5e, 6, up to 100m (328ft) ■ 802.3at PoE+: 2-pair UTP Cat. 3, 4, 5, up to 100m (328ft)
Data Rate 10/100/1000Mbps
Dimensions (W x D x H) 32 x 87 x 132 mm
Weight 425g
Installation DIN rail/wall mountable
Enclosure IP30 metal case
Power Requirements 50 ~ 56V DC PoE
Power Output (at 56V DC Input) 110-watt PoE input: 12V DC, 8A (max.) 24V DC, 4A (max.) ■ 75-watt PoE input: 12V DC, 4.5A (max.) 24V DC, 2.3A (max.)
Power Consumption System on with PoE input: 3.7 watts ■ Ethernet full loading without DC output: 3.7 watts ■ Full loading with maximum 12V DC, 4A output: 60.2 watts ■ Full loading with maximum 12V DC, 8A output: 110 watts (110-watt PoE in)
Power over Ethernet
PoE Standard 802.3bt Type 3/Type 4 Power over Ethernet, 4-pair 802.3at PoE+
Power Output DC 12V/24V by DIP switch control
PoE Power Supply Type end-span + mid-span end-span mid-span
Power Pin Assignment 1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-) or 1/2(-), 3/6(+); 4/5(+), 7/8(-)
Standards Conformance
Standards Compliance IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3af Power over Ethernet
Regulatory Compliance FCC Part 15 Class A, CE
Environment
Operating Temperature -40~ 75 degrees C
Storage Temperature -40~ 85 degrees C
Humidity 5 ~ 95% (non-condensing)
Click here to open the datasheets