View cart “GS-5220-24P4X – 24-Port 30W PoE Managed Switch with 4-Port Shared SFP + 4-Port 10G SFP+ (400W)” has been added to your cart.

IPOE-171-60W – Industrial Single-Port 10/100/1000Mbps 802.3bt PoE Injector (60 Watts, -40~75 degrees C, 48~56VDC)

Available on backorder

Part Number:IPOE-171-60W

IN STOCK. Same day shipping available.


  • 2 RJ45 interfaces - 1-port Data + Power output - 1-port Data input
  • 1 terminal block for master and slave power input. (Power Range: 48 ~ 56V DC redundant power)
  • 1 PoE mode (standard/legacy) DIP switch

  Power over Ethernet

  • Complies with IEEE 802.3af/at/bt PoE end-span/mid-span PSE
  • Supports PoE power up to 60 watts for PoE port
  • Auto-detection of PoE IEEE 802.3af/at/bt equipment and devices from being damaged by incorrect installation
  • Monitors the status of the total PoE usage in real time
  • Remote power feeding up to 100m
  • Auto-detection of DC input voltage


  • IP30 slim-type metal case
  • LED indicators for Power LED , PoE-in-Use LED and PoE Usage LED
  • Industrial Case and Installation
  • Solid wall mount or DIN-rail mount installation
  • Supports 6KV DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
IPOE-171-60W - Industrial Single-Port 10/100/1000Mbps 802.3bt PoE Injector (60 Watts, -40~75 degrees C, 48~56VDC)
Hardware Specifications
Interface Input Port 1 x RJ45 STP Data InOutput Port 1 x RJ45 STP PoE (Data + Power) OutInput power terminal block 1
Network Cable Twisted-pair cable up to 100 meters (328ft) 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6 100BASE-TX: 4-pair UTP Cat. 5, 5e, 6 1000BASE-T: 4-pair UTP Cat. 5e, 6
LED Indicator System: Power 1 (Green), Power 2 (Green), Fault (Red) PoE Port: PoE-in-Use x 1 (Orange) PoE Usage: PoE Usage x 3 (Orange)
Data Rate 10/100/1000Mbps
Dimensions (W x D x H) 135 x 87.8 x 32 mm
Weight 430g
Power Requirements DC 48~56V, 2A max.
Unit Output Voltage DC 45~53V
Power Consumption 75 watts max.
No. of devices that can be powered 1
Installation DIN-rail kit or wall-mount ear
Alarm Provides one relay output for power failure Alarm Relay current carry ability: 1A @ DC 24V
Enclosure IP30 slim-type metal case
Power over Ethernet
PoE Standard IEEE 802.3af/at/bt Ultra PoE PSE
PoE Power Output Budget DC 50~54V / 60-watt PoE via 4-pair DC 48~49V / 30-watt PoE via 2-pair
PoE Power Output Max. 60W@1m cable Max. 51W@100m cable
PoE Power Supply Type End-span + Mid-span
Power Pin Assignment Pair 1 End-span: 1/2 (-), 3/6 (+) Pair 2 Mid-span: 4/5 (+), 7/8 (-)
PoE mode Standard: To provide power to the PD device that follows the IEEE 802.3af/at/bt standard.Legacy: To provide power to the PD device that does not fully follow the IEEE 802.3af/at/bt standard.
Standards Conformance
Standards Compliance IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bt 4-pair Power over Ethernet Type 3 IEEE 802.3at Power over Ethernet Plus IEEE 802.3af Power over Ethernet
Regulatory Compliance FCC Part 15 Class A, CE
Operating Temperature -40 ~ 75 degrees C
Storage Temperature -40 ~ 85 degrees C
Operating Humidity 5 ~ 90%, relative humidity, non-condensing
Storage Humidity 5 ~ 90%, relative humidity, non-condensing
Standard Accessories
Package Contents IPOE-171-60W User's manual Wall-mount kit Dust cap
Click here to open the datasheets