IPOE-E174 – Industrial PoE Extender up to 4 PoE Devices

Out of stock

Physical Port

  • Five 10/100/1000BASE-T Gigabit RJ45 interfaces

- 1-port data + power input - 4-port data + power output Power over Ethernet

  • 1-port data + power input

- Complies with ultra Power over Ethernet end-span and mid-span PD- Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD- Supports PoE input power up to 75 watts

  • 4-port data + power output

- Complies with IEEE 802.3af/at PoE/end-span PSE- Up to 4 IEEE 802.3af/at devices powered- Supports PoE power up to 30 watts for each PoE port- Auto detects powered device (PD)

  • Extends the range of PoE to an additional 100 meters (328ft.)
  • Forwards both Ethernet data and PoE power to remote device

Layer 2 Features

  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • Integrates address look-up engine, supporting 2K absolute MAC addresses
  • 9K jumbo frame support in 1000Mbps duplex mode
  • Automatic address learning and address aging

Industrial Case and Installation

  • IP30 metal case
  • DIN rail and wall-mount design
  • Supports 6000V DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
  • No external power cable required for installation
  • Plug and Play installation


IPOE-E174 - Industrial PoE Extender up to 4 PoE Devices
Hardware Specifications
Hardware Version 2
Network Connector PoE In Port 1 x 10/100/1000BASE-T Ethernet with ultra PoE “Data + DC” in, auto MDI/MDI-X, auto-negotiation RJ45 connector PoE Out Port 4 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/at PoE “Data + DC” out, auto MDI/MDI-X, auto-negotiation RJ45 connector
Switch Architecture Store-and-Forward switch architecture
MAC Address Table 2K MAC address table with auto learning function
Switch Fabric 10Gbps
Switch Throughput 7.44Mpps @ 64Bytes
Flow Control IEEE 802.3x pause frame for full duplex Back pressure for half duplex
Jumbo Frame 9Kbytes
ESD Protection 6KV DC
Enclosure IP30 metal case
Installation DIN rail kit and wall-mount ear
Cable Twisted-pair cable : ■ 10BASE-T: 2-pair UTP Cat. 3, 4, 5 up to 100 meters ■ 100BASE-TX: 2-pair UTP Cat. 5, 5e up to 100 meters ■ 1000BASE-T: 4-pair UTP Cat. 5e, 6 up to 100 meters
Dimensions (W x D x H) 32 x 85 x 135 mm
Weignt 424g
Power Consumption 4.1 watts/13.9 BTU (Power On) 64.7 watts/220.6 BTU (Full PoE loading without data transfers) 66.1 watts/225.4 BTU (Full loading with PoE function)
LED Display System: PWR (Green) Power Input: 30W, 2-pair 802.3at PoE in (Green) Power Input: 60W+, 4-pair 802.3bt, Ultra PoE or UPOE in (Green) PoE Power Usage: 20W, 40W and 60W PoE Input Port: LNK/ACT (Green) PoE Input Port: PoE in (Orange) Per PoE Output Port: LNK/ACT (Green) Per PoE Output Port: PoE-in-Use (Orange)
Power over Ethernet
PoE Standard PoE In Port IEEE 802.3at High Power over Ethernet end-span/mid-span class 4 PD Per PoE Out Port IEEE 802.3at High Power over Ethernet end-span PSE IEEE 802.3af Power over Ethernet end-span PSE
PoE Power PoE In Port 50~57V DC, max. 72 watts Per PoE Out Port 44~55V DC, max. 30.8 watts
Power Pin Assignment PoE In Port 1/2(+), 3/6(-); 4/5(+), 7/8(-) Per PoE Out Port 1/2(+), 3/6(-)
Compatible PoE Injectors POE-171A-60 POE-171A-95 IPOE-171-60 IPOE-171-95
PoE Power Budget 64 watts (max.) @ PoE Type 3 input (Ultra PoE input) 30 watts (max.) @ PoE Type 2 input (802.3at input) 15 watts (max.) @ PoE Type 1 input (802.3af input)
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Stability Testing IEC 60068-2-32 (Free fall) IEC 60068-2-27 (Shock) IEC 60068-2-6 (Vibration)
Standards Compliance IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt Higher Power over Ethernet
Operating Temperature: -40 ~ 75 degrees C Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -40 ~ 85 degrees C Relative Humidity: 5 ~ 95% (non-condensing)
Click here to open the datasheets