View cart “MGB-TSX – SFP-Port 1000Base-SX – 220m OM1 or 550m OM3 Industrial” has been added to your cart.
Back

ICS-2200T – Industrial 2-Port RS232/RS422/RS485 Serial Device Server

1 in stock (can be backordered)

Part Number:ICS-2200T

IN STOCK. Same day shipping available.

Serial Interface

  • Two DB9 interfaces support RS232, 2-wire RS485, 4-wire RS485 and RS422 operation
  • Asynchronous serial data rates up to 921600bps
  • Data mode including VCOM, RFC2217, TCP Server, TCP Client, UDP, Remote Pair and Serial Telnet modes

Ethernet Interface

  • 2-port 10/100BASE-TX RJ45 interface with auto MDI/MDI-X function
  • Ethernet ports support Ethernet switch or cascading operation for easy wiring

Management

  • IPv4 and IPv6 Dual stack management
  • IPv4 and IPv6 dual stack management
  • Remote Management Interfaces

- Windows-based VCOM utility supports searching, monitoring and configuration setting

  • IP NTP (Network Time Protocol) and DNS management
  • Standard TCP/IP interface and versatile operation modes
  • Software Protocol supports ARP, ICMP, TCP/IP, UDP, HTTP server, DHCP client, Telnet server/client 
  • Serial Operation mode selected via management interface
  • Pair Connection mode for connecting two serial devices over a network
  • Allows a max. of 4 hosts to be accessed as TCP client mode
  • Firmware upgrade via HTTP protocol
  • Accessible IP security control to prevent illegal users
  • Event notification

- Remote Syslog server
- SNMP trap
- Built-in buzzer- Relay output alarm

  • DHCP client for IP address assignment 
  • PLANET Smart Discovery utility automatically finds the client devices on the network

Industrial Case and Installation

  • IP30 metal case 
  • DIN-rail and wall-mount designs
  • Redundant power design
  • - 12 to 48V DC, redundant power with polarity reverse protect function

  • Supports 6000 VDC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
  • Free fall, shock-proof and vibration-proof for industries
  • Supports extensive LED indicators for network diagnosis
  • Reset button for reset to factory default
ICS-2200T - Industrial 2-Port RS232/RS422/RS485 Serial Device Server
Serial Interface
Serial Ports 2 x DB9 male
Serial Standards RS232/RS422/4-wire RS485/2-wire RS485
Baud Rate (Data Rate) 50bps to 921Kbps
Data Bits 5, 6, 7, 8
Parity Type 1, 1.5, 2
Stop Bit Odd, Even, None, Space, Mark
Flow Control RTS/CTS and DTR/DSR (RS232 only)
XON/XOFF
Signals RS232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS422: Tx+, Tx-, Rx+, Rx-, GND
4-wire RS485: Tx+, Tx-, Rx+, Rx-, GND
2-wire RS485: Data A (+), Data B (-), GND
Pin Assignment
Pin RS232 RS422
RS485-4W
RS485-2W
1 DCD TxD+ --
2 RxD TxD- --
3 TxD RxD- Data-
4 DTR RxD+ Data+
5 GND GND GND
6 DSR -- --
7 RTS -- --
8 CTS -- --
9 -- -- --
Serial Line Protection 2KV isolation protection
1KV (level 2) surge protection
15KV ESD protection
Ethernet Interface
Ethernet Ports 2 x RJ45
Standard 10/100BASE-TX
Distance 100m
Switch Architecture Store-and-Forward
Address Table 1K
ESD Protection 6KV
Surge Protection 2KV
Hardware
Installation DIN-rail kit and wall-mount ear
Enclosure IP40 metal
Dimensions (W x D x H) 56 x 87 x 135 mm
Weight 477 g
LED Indicators System: Power 1, Power 2, Fault, SYS
TP Port: Link/Active
Serial Port: Tx and Rx
Power Requirements 12~48V DC, redundant power with polarity reverse protection function
Power Consumption Full Loading
12VDC: 0.419A (5.1 watts)
24VDC: 0.227A (5.4 watts)
48VDC: 0.136A (6.5 watts)
Connector Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
DI and DO N/A
Alarm Provides one relay output for power failure
Alarm relay current carry ability: 1A @ DC 24V
Reset Button < 5 sec: System reboot
> 5 sec: Factory default
Management
Management Interfaces Web management
Telnet Console management
Windows-based VCOM Utility management
PLANET Smart Discovery Utility
IP Version IPv4 and IPv6
Operation Mode TCP Server
TCP Client
UDP Client
Virtual COM
RFC2217
Telnet Server
Pair Connection – Remote (Slave)
Pair Connection – Local (Master)
Virtual COM Utility Platform Supports Windows Base Only:
Windows XP
Windows Server 2003
Windows 7
Windows Server 2008
Windows 8 (Must install the latest version of WinPcap)
Windows Server 2012 (Must install the latest version of WinPcap)
Windows 10
Alert Built-in buzzer and RTC
Security Allow max. 4 accessible IP address hosts/ranges
SNMP MIBs RFC1213 MIB-II
RFC1317 RS232-like OIDs
Standards Conformances
Regulatory Compliance FCC Part 15 Class A,
CE Certification Class A
Stability Testing IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Standards IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x flow control and back pressure
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 854 Telnet
RFC 958 NTP
RFC 1591 DNS (client only)
RFC 1908 SNMPv2c
RFC 2068 HTTP
RFC 2131 DHCP Client
RFC 2732 Format for Literal IPv6 Addresses in URL's
RFC 3315 DHCPv6 Client
RFC 3513 IPv6 Addressing Architecture
RFC 3596 DNSv6
RFC 4443 ICMPv6
EIA/TIA RS232/422/485
Regulatory Approval RoHS
Environment
Operating Temperature -40 ~ 75 degrees C
Storage Temperature -40 ~ 85 degrees C
Humidity 5 ~ 95% (non-condensing)
Click here to open the datasheets