GS-4210-8P2T2S - Planet 8-Port 30W PoE Managed Switch with 2-Port TP + 2-Port SFP (240W)

Physical Port

• 10-Port 10/100/1000Base-T Gigabit RJ45 copper with 8-Port IEEE 802.3at/af PoE Injector (Port-1 to Port-8)
• 2 100/1000Base-X mini-GBIC/SFP slots
• RJ45 console interface for switch basic management and setup

Power over Ethernet

• Complies with IEEE 802.3at High Power over Ethernet End-Span PSE
• Complies with IEEE 802.3af Power over Ethernet End-Span PSE
• Up to 8 ports of IEEE 802.3af / 802.3at devices powered
• Supports PoE Power up to 30.8 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters
• PoE Management
  – Total PoE power budget control
  – Per port PoE function enable/disable
  – PoE Port Power feeding priority
  – Per PoE port power limitation
  – PD classification detection
  – PD alive-check
  – PoE schedule

Layer 2 Features

• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Supports VLAN
  – IEEE 802.1Q tagged VLAN
  – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
  – Protocol VLAN
  – Voice VLAN
  – Private VLAN
  – Management VLAN
  – GVRP

• Supports Spanning Tree Protocol
  – STP (Spanning Tree Protocol)
  – RSTP (Rapid Spanning Tree Protocol)
  – MSTP (Multiple Spanning Tree Protocol)
  – STP BPDU Guard, BPDU Filtering and BPDU Forwarding

• Supports Link Aggregation
  – IEEE 802.3ad Link Aggregation Control Protocol (LACP)
  – Cisco ether-channel (Static Trunk)
  – Maximum 8 trunk groups, up to 8 ports per trunk group
• Provides port mirror (many-to-1)
• Loop protection to avoid broadcast loops

Quality of Service

• Ingress / Egress Rate Limit per port bandwidth control
• Storm Control support
  – Broadcast / Unknown-Unicast / Unknown-Multicast
• Traffic classification
  – IEEE 802.1p CoS- TOS / DSCP / IP Precedence of IPv4/IPv6 packets
• Strict priority and Weighted Round Robin (WRR) CoS policies

Multicast

• Supports IGMP Snooping v2 and v3
• Supports MLD Snooping v1, v2
• IGMP Querier mode support
• IGMP Snooping port filtering
• MLD Snooping port filtering

Security

• Authentication
  – IEEE 802.1X Port-based network access authentication
  – Built-in RADIUS client to co-operate with the RADIUS servers
  – RADIUS / TACACS+ login user access authentication

• Access Control List
  – IPv4 / IPv6 IP-based ACL
  – MAC-based ACL

• MAC Security
  – Static MAC
  – MAC Filtering
• Port Security for Source MAC address entries filtering
• DHCP Snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• DoS Attack Prevention
• SSH/SSL

Management

• IPv4 and IPv6 dual stack management
• Switch Management Interface
  – Web switch management
  – Telnet Command Line Interface
  – SNMP v1, v2c and v3
  – SSH / SSL secure access
• User Privilege Levels Control
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
  – Firmware upload/download via HTTP / TFTP
  – Configuration upload / download through Web interface
  – Dual Images
  – Hardware reset button for system reboot or reset to factory default
• SNTP Network Time Protocol
• Cable Diagnostics
• Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
• SNMP trap for interface Link Up and Link Down notification
• Event message logging to remote Syslog server
• Four RMON groups (history, statistics, alarms, and events)
• PLANET Smart Discovery Utility
• Smart fan with speed control