Categories

GS-4210-8HP2S – Planet 2-Port 95W PoE + 6-Port 30W PoE + 2-Port SFP Gigabit Managed Switch

Part Number: GS-4210-8HP2S Categories , , , ,

PLANET GS-4210-8HP2S is a Managed Switch that provides 2 x 10/100/1000BASE-T ports featuring 95-watt 802.3bt PoE++, 6 x 10/100/1000BASE-T ports featuring 36-watt 802.3at PoE+ and 2 x 100/1000BASE-X SFP ports. With a total power budget of up to 240 watts for different kinds of PoE applications, the GS-4210-8HP2S provides a quick, safe and cost-effective 802.3bt PoE++ network solution.

Physical Port

  • 8-port 10/100/1000BASE-T RJ45 copper with PoE injector function
  • 2 100/1000BASE-X mini-GBIC/SFP slots
  • RJ45 console interface for switch basic management and setup

Power over Ethernet

  • Complies with IEEE 802.3bt PoE++ and 802.3at PoE+ standard PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Selectable PoE mode: End-span/Mid-span/802.3bt/UPoE/Legacy
  • Ports 1 to 6 support up to 36 watts
  • Ports 7 to 8 support up to 95 watts
  • Each PoE port supports 54V DC power to powered device
  • 240-watt PoE budget
  • Auto detects powered device
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters in standard mode and 250m in extended mode
  • PoE management
    – Total PoE power budget control
    – Per port PoE function enable/disable
    – PoE port power feeding priority
    – Per PoE port power limitation
    – PD classification detection
    – PoE extension
  • Intelligent PoE features
    – PD alive check
    – PoE schedule
    – Scheduled power recycling

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, broadcast storm control, and runt/CRC filtering that eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
    – IEEE 802.1Q tagged VLAN
    – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    – Protocol VLAN
    – Voice VLAN
    – Private VLAN
    – Management VLAN
    – GVRP
  • Supports Spanning Tree Protocol
    – STP (Spanning Tree Protocol)
    – RSTP (Rapid Spanning Tree Protocol)
    – MSTP (Multiple Spanning Tree Protocol)
    – STP BPDU Guard, BPDU filtering and BPDU forwarding
  • Supports Link Aggregation
    – IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    – Cisco ether-channel (static trunk)
  • Provides port mirror (many-to-1)
  • Loop protection to avoid broadcast loops

Quality of Service

  • Ingress and egress rate limit per port bandwidth control
  • Storm control support
    – Broadcast/Unknown unicast/Unknown multicast
  • Traffic classification
    – IEEE 802.1p CoS
    – TOS/DSCP/IP precedence of IPv4/IPv6 packets
  • Strict priority and Weighted Round Robin (WRR) CoS policies

Multicast

  • Supports IPv4 IGMP snooping v2 and v3
  • Supports IPv6 MLD snooping v1, v2
  • IGMP querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering

Security

  • Authentication
    – IEEE 802.1X port-based network access authentication
    – Built-in RADIUS client to cooperate with the RADIUS servers
    – RADIUS/TACACS+ login user access authentication
  • Access control list
    – IPv4/IPv6 IP-based ACL
    – MAC-based ACL
  • MAC security
    – Static MAC
    – MAC filtering
  • Port security for source MAC address entries filtering
  • DHCP snooping to filter distrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP source guard prevents IP spoofing attacks
  • DoS attack prevention
  • SSH/SSL

Management

  • IPv4 and IPv6 dual stack management
  • Switch management interface
    – Web switch management
    – Telnet command line interface
    – SNMP v1 and v2c switch monitoring
    – SSHv2 and TLSv1.2 and SNMP v3 secure access
  • SNMP Management
    – Four RMON groups (history, statistics, alarms and events)
    – SNMP trap for interface link up and link down notification
  • User privilege levels control
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • System maintenance
    – Firmware upload/download via HTTP/TFTP
    – Configuration upload/download through web interface
    – Dual images
    – Hardware reset button for system reboot or reset to factory default
  • SNTP Network Time Protocol
  • Network Diagnostic
    – SFP-DDM (digital diagnostic monitor)
    – Cable diagnostics
    – ICMPv4/ICMPv6 remote ping
  • Link Layer Discovery Protocol (LLDP) and LLDP-MED
  • Event message logging to remote Syslog server
  • PLANET smart discovery utility
  • Smart fan with speed control
GS-4210-8HP2S Application Diagram