GS-4210-24UP4C – Planet 16-Port 60W Ultra PoE Gigabit Managed Switch + 4-Port shared TP/SFP (600W)
Part Number:
GS-4210-24UP4C
Categories PoE, PoE Switches, Switches, Switches
The GS-4210-24UP4C provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 24 10/100/1000BASE-T ports featuring 95-watt 802.3bt type-4 PoE++ injector ports and 4 additional Gigabit TP/SFP combo ports, with a total power budget of up to 720 watts.
- Key Features
- Specifications
- Applications
Physical Port
- 28 10/100/1000BASE-T RJ45 copper ports with 24-Port IEEE 802.3af PoE/802.3at PoE+/802.3bt PoE++ injector
- 4 100/1000BASE-X mini-GBIC/SFP slots, shared with port-25 to port-28 compatible with 100BASE-FX SFP
- RJ45 console interface for switch basic management and setup
Power over Ethernet
- Complies with IEEE 802.3bt Power over Ethernet Plus Plus
- Backward compatible with IEEE 802.3at Power over Ethernet Plus
- Up to 24 ports of IEEE 802.3at/IEEE 802.3bt PoE devices powered
- 8 PoE ports with built-in 802.3bt type-4 PoE 90W or ultra PoE 95-watt injector function (Ports 1 to 8)
- 16 PoE ports with built-in 802.3bt type-3 PoE 60W or ultra PoE 72-watt injector function (Ports 9 to 24)
- All PoE ports support 802.3at end-span/mid-span PoE 36W injector function
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100 meters in standard mode and 250m in extend mode
- PoE management
– PoE Legacy mode option
– Temperature threshold control
– PoE Chipset temperature display
– Per port PoE function enable/disable
– Per port PoE Inline mode option
– PoE port power feeding priority
– PD classification detection - Intelligent PoE features
– PD alive check
– PoE schedule
– PoE extension
Layer 2 Features
- Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
- High performance Store and Forward architecture, broadcast storm control, and runt/CRC filtering that eliminates erroneous packets to optimize the network bandwidth
- Supports VLAN
– Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
– Protocol VLAN
– Voice VLAN
– Private VLAN
– Management VLAN
– GVRP - Supports Spanning Tree Protocol
– STP (Spanning Tree Protocol)
– RSTP (Rapid Spanning Tree Protocol)
– MSTP (Multiple Spanning Tree Protocol)
– STP BPDU Guard, BPDU filtering and BPDU forwarding - Supports Link Aggregation
– IEEE 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk) - Provides port mirror (many-to-1)
- Loop protection to avoid broadcast loops
Quality of Service
- Ingress and egress rate limit per port bandwidth control
- Storm control support
– TOS/DSCP/IP precedence of IPv4/IPv6 packets - Strict priority and Weighted Round Robin (WRR) CoS policies
Multicast
- Supports IPv4 IGMP snooping v2 and v3
- Supports IPv6 MLD snooping v1, v2
- IGMP querier mode support
- IGMP snooping port filtering
- MLD snooping port filtering
Security
- Authentication
– Built-in RADIUS client to cooperate with the RADIUS servers
– RADIUS/TACACS+ login user access authentication - Access control list
– IPv4/IPv6 IP-based ACL
– MAC-based ACL - MAC security
– Static MAC
– MAC filtering - Port security for source MAC address entries filtering
- DHCP snooping to filter distrusted DHCP messages
- Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
- IP source guard prevents IP spoofing attacks
- DoS attack prevention
- IP address access management to prevent unauthorized intruder
Management
- IPv4 and IPv6 dual stack management
- Switch management interface
– Console and telnet command line interface
– SNMP v1 and v2c switch management
– SSHv2, TLSv1.2 and SNMP v3 secure access - SNMP Management
– Four RMON groups (history, statistics, alarms and events)
– SNMP trap for interface link up and link down notification - User privilege levels control
- Built-in Trivial File Transfer Protocol (TFTP) client
- BOOTP and DHCP for IP address assignment
- System maintenance
– Firmware upload/download via HTTP/TFTP
– Configuration upload/download through web interface
– Dual images
– Hardware reset button for system reboot or reset to factory default - SNTP Network Time Protocol
- Network Diagnostic
– SFP-DDM (digital diagnostic monitor)
– Cable diagnostics
– ICMPv4/ICMPv6 remote ping
- Link Layer Discovery Protocol (LLDP) and LLDP-MED
- Event message logging to remote syslog server
- Smart fan with speed control
- PLANET UNI-NMS (Universal Network Management) and Smart Discovery Utility for deployment management
Hardware Specifications | |
---|---|
Copper Ports | 28 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X port |
SFP Slots | 4 x 100/1000BASE-X SFP interface shared with port-25 to port-28 Supports 100/1000Mbps dual mode and DDM |
PoE Injector Port | 24 ports with 802.3at/af/802.3bt PoE++ injector function with port-1 to port-24 |
Switch Architecture | Store-and-Forward |
Switch Fabric | 56Gbps/non-blocking |
Switch Throughput@64Bytes | 41.67Mpps |
Address Table | 8K entries |
Shared Data Buffer | 4.1 megabits |
Flow Control | IEEE 802.3x pause frame for full duplex Back pressure for half duplex |
Jumbo Frame | 10K bytes |
Reset Button | < 5 sec: System reboot > 5 sec: Factory default |
LED | System: PWR x1 (Green) SYS x1 (Green) Per PoE Port (Port 1 to Port 24): 10/100/1000 LNK/ACT x1 (10/100:Orange.1000:Green) IEEE 802.3af/at/bt PoE-in-use x1 (802.3af/at: Orange. 802.3bt: Green) Per Gigabit TP Port (Port 25 to Port 28): 10/100 LNK/ACT x1 (Orange) 1000 LNK/ACT x1 (Green) Per Gigabit SFP Port (Port 25 to Port 28): 100 LNK/ACT x1 (Orange) 1000 LNK/ACT x1 (Green) Alert: PoE PWR x1 (Red) FAN1 x1 (Red) FAN2 x1 (Red) FAN3 x1 (Red) |
Power Requirements | 100~240V AC, 50/60Hz, auto-sensing |
Dimensions (W x D x H) | 440 x 300 x 44.5 mm, 1U height |
ESD Protection | Contact Discharge 4KV DC Air Discharge 8KV DC |
Enclosure | Metal |
Weight | 5kg |
Power Consumption/Dissipation | 900 watts (max.)/3070 BTU |
Fan | 3 x smart fan |
Power over Ethernet | |
PoE Standard | IEEE 802.3bt PoE++ PSE Backward compatible with IEEE 802.3at/af PoE PSE |
PoE Power Supply Type | ■ 802.3bt ■ UPoE/POH ■ End-span ■ Mid-span ■ Force |
PoE Power Output | Per port 54V DC ■ 802.3bt mode, Ports 1 to 8: maximum 90 watts ■ 802.3bt mode, Ports 9 to 24: maximum 60 watts ■ UPoE mode, Ports 1 to 8: maximum 95 watts ■ UPoE-mode, Ports 9 to 24: maximum 72 watts ■ End-span mode: maximum 36 watts ■ Mid-span mode: maximum 36 watts |
Power Pin Assignment | ■ 802.3bt: 1/2(-), 3/6(+), 4/5(+), 7/8(-) ■ UPoE: 1/2(-), 3/6(+), 4/5(+), 7/8(-) ■ End-span: 1/2(-), 3/6(+) ■ Mid-span: 4/5(+), 7/8(-) |
PoE Power Budget | 720 watts, operating temperature < 40 degrees C 660 watts, operating temperature between 40 to 49 degrees C 600 watts, operating temperature around 50 degrees C (Factory default mode) |
Number of 90W 802.3bt Type-4 PDs | 8 |
Number of 60W 802.3bt Type-3 PDs | 12 |
Number of 802.3at PDs | 24 |
PoE Management Functions | |
Active PoE Device Detection | Yes |
PoE Power Recycle | Yes, daily or predefined schedule |
PoE Schedule | 4 schedule profiles |
PoE Extend Mode | Yes, max. up to 250 meters |
PoE Port Management | ■ Port Enable/Disable/Schedule ■ PoE mode control – 802.3bt – UPoE – 802.3at End-span – 802.3at Mid-span ■ Force mode ■ Port Priority |
Layer 2 Functions | |
Port Mirroring | TX/RX/both Many-to-1 monitor Up to 4 sessions |
VLAN | 802.1Q tagged VLAN Up to 256 VLAN groups, out of 4094 VLAN IDs 802.1ad Q-in-Q tunneling Voice VLAN Protocol VLAN Private VLAN (Protected port) GVRP |
Link Aggregation | IEEE 802.3ad LACP and static trunk Supports 2 groups of 4-port trunk |
Spanning Tree Protocol | IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) STP BPDU Guard, BPDU Filtering and BPDU Forwarding |
IGMP Snooping | IGMP (v2/v3) snooping IGMP querier Up to 256 multicast groups |
MLD Snooping | MLD (v1/v2) snooping, up to 256 multicast groups |
Access Control List | IPv4/IPv6 IP-based ACL/MAC-based ACL |
QoS | 8 mapping IDs to 8 level priority queues – Port number – 802.1p priority – 802.1Q VLAN tag – DSCP field in IP packet Traffic classification based, strict priority and WRR |
Security | IEEE 802.1X port-based authentication Built-in RADIUS client to cooperate with RADIUS server RADIUS/TACACS+ user access authentication IP-MAC port binding MAC filtering Static MAC address DHCP Snooping and DHCP Option82 STP BPDU guard, BPDU filtering and BPDU forwarding DoS attack prevention ARP inspection IP source guard |
Management Functions | |
Basic Management Interfaces | Web browser; Telnet; SNMP v1, v2c |
Secure Management Interfaces | SSHv2, TLS v1.2, SNMP v3 |
System Management | Firmware upgrade by HTTP/TFTP protocol through Ethernet network Remote/Local Syslog System log LLDP protocol SNTP PLANET Smart Discovery Utility PLANET UNI-NMS central management software |
SNMP MIBs | RFC 1213 MIB-II RFC 1215 Generic Traps RFC 1493 Bridge MIB RFC 2674 Bridge MIB Extensions RFC 2737 Entity MIB (v2) RFC 2819 RMON (1, 2, 3, 9) RFC 2863 Interface Group MIB RFC 3635 Ethernet-like MIB RFC 3621 Power Ethernet MIB |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE, LVD |
Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree protocol IEEE 802.1w Rapid Spanning Tree protocol IEEE 802.1s Multiple Spanning Tree protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt Power over Ethernet Plus Plus IEEE 802.3az Energy Efficient Ethernet (EEE) RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP version 1 RFC 2236 IGMP version 2 RFC 3376 IGMP version 3 RFC 2710 MLD version 1 RFC 3810 MLD version 2 |
Environment | |
Operating | Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Storage | Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |