FSD-504HP - Planet 4-Port 30W PoE Switch with 1-Port Up Link (60W)

Part Number: FSD-504HP Categories PoE, PoE Extend Mode, PoE Switches, Switches, Switches

Log in or Register for current pricing

The FSD-504HP, is a 4-port 10/100Mbps 802.3at/af Power over Ethernet + 1-port Fast Ethernet Switch with a total power budget of 60W. Targeting the increasingly popular IP surveillance applications, the FSD-504HP 802.3at/af PoE Switch is also positioned as a Surveillance Switch for quick and easy PoE IP camera deployment with power feeding, while also providing VLAN protection features whose ports can then be isolated from one another via DIP switch.

2 in stock (can be backordered)

Key Features
Specifications
Applications

RJ45 Interface

5 10/100Mbps Fast Ethernet ports
4 ports supporting 51V DC power to PoE powered device

Power over Ethernet

Complies with IEEE 802.3af/at Power over Ethernet end-span + mid-span PSE
Up to 4 IEEE 802.3af/2 IEEE 802.3at devices powered
Supports PoE power up to 30 watts for each PoE port
60-watt PoE budget
Hardware DIP switch for “Standard” and “Extend” mode selection; the “Extend” mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation
Auto detects powered device (PD)
Circuit protection prevents power interference between ports
Remote power feeding up to 100m in the standard mode

Switching

Hardware-based 10/100Mbps auto-negotiation and auto MDI/MDI-X
Flow control for full duplex operation and back pressure for half duplex operation
1536bytes packet size support
Integrates address look-up engine, supporting 1K absolute MAC addresses
Automatic address learning and address aging
Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing

Hardware

Desktop palm size
LED indicators for PoE ready/activity and LINK/ACT
6KV lightning protection
One 51V DC power jack

Hardware Specifications
Network Connector	5-port RJ45 for 10/100BASE-TX, auto MDI/MDIX
PoE Inject Port	4-port with 802.3af/at PoE injector function (Port 1 to Port 4)
LED Display	System: Power (Orange)Per PoE port: PoE (Orange, Port 1 to Port 4) LNK/ACT (Green, Port 1 to Port 5)
DIP Switch	Standard mode for 100M Extend mode for 250m (Based on the cable category)
Switch Architecture	Store and Forward switch architecture
MAC Address Table	1K MAC address table with auto learning function
EST Protection	6KV
Switch Fabric	1Gbps
Switch Throughput	0.74Mpps @64bytes
Maximum Packet Size	1536bytes
Flow Control	Back pressure for half duplex. IEEE 802.3x pause frame for full duplex
Power Requirements	51V DC, 1.25A
Power Consumption	Max. 63 watts, 214 BTU
Dimensions (W x D x H)	100 x 100 x 26 mm
Weight	257g
Power over Ethernet
PoE Standard	IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type	End-span + mid-span
Power Pin Assignment	1/2(+), 4/5(+), 3/6(-), 7/8(-)
PoE Power Output	Per Port 51V DC, 300mA. max. 15.4 watts (IEEE 802.3af) Per Port 51V DC, 600mA. max. 30 watts (IEEE 802.3at)
PoE Power Budget	60 watts
Number of PDs, 7 watts	4
Number of PDs, 15.4 watts	4
Number of PDs, 30 watts	2
Standard Conformance
EMI Safety	FCC, CE
Standard Compliance	IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus
Environment
Operating Environment	0 ~ 50 degrees C
Storage Environment	-10 ~ 70 degrees C
Operating Humidity	5 ~ 95%, relative humidity, non-condensing
Storage Humidity	5 ~ 95%, relative humidity, non-condensing