Back

FGSD-1008HPS – 8-Port 30W PoE Switch with 2-Port Up Link and 2 Port SFP (120W)

1 in stock (can be backordered)

Part Number:FGSD-1008HPS

PLANET FGSD-1008HPS provides 8 10/100BASE-T PoE ports, in-line power interfaces and two Gigabit TP/SFP Combo interfaces which support high-speed transmission of surveillance images and videos.

Physical Port

  • 8-port 10/100BASE-TX RJ45 copper with PoE in-line supported
  • 2-port 10/100/1000BASE-T RJ45 copper
  • 2 1000BASE-X mini-GBIC/SFP slots to share with Port-9 to Port-10
  • Reset button for system management

PoE

  • Complies with IEEE 802.3at High Power over Ethernet End-span PSE
  • Complies with IEEE 802.3af Power over Ethernet End-span PSE
  • Up to 8 IEEE 802.3at / 802.3af devices powered
  • 125 watts PoE budget
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Detects powered device (PD) automatically
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE Management

- Per port PoE function enable/disable- PoE Port Power feeding priority- Per PoE port power limit- PD classification detection- PoE Power sequential  Layer 2 Features

  • Auto-MDI/MDI-X detection on each RJ45 port
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Supports broadcast storm control
  • Supports VLAN

- IEEE 802.1Q tag-based VLAN, up to 30 VLANs groups, out of 4094 VLAN IDs- Port-based VLAN, up to 10 VLAN groups- MTU VLAN (Multi-tenant Unit VLAN)

  • Supports Link Aggregation

- 802.3ad Link Aggregation Control Protocol (LACP)- Cisco ether-channel (static trunk)- Maximum 3 trunk / LACP groups, up to 4 ports per trunk / LACP group

  • Supports Spanning Tree Protocol

- STP, IEEE 802.1D Spanning Tree Protocol- RSTP, IEEE 802.1w Rapid Spanning Tree Protocol

  • Port mirroring to monitor the incoming or outgoing traffic on a particular port, many-to-1
  • Loopback protection to avoid broadcast loops

Quality of Service

  • Ingress / Egress Rate Limit per port bandwidth control
  • 2 priority queues on all switch ports
  • Traffic classification

- Port-based priority- IEEE 802.1p-based priority- IP TOS / DSCP-based priority- TCP / UDP port-based QoS

  • Strict priority and Weighted Round Robin (WRR) CoS policies

Multicast

  • Supports IGMP Snooping v1 and v2

Security

  • Physical port to MAC address binding
  • TCP/UDP port number filter: Forwarding or discarding typical network applications

Management

  • Switch Management Interfaces

- Web switch management- SNMP v1 / v2c switch management

  • Supports DHCP Option82 and DHCP Relay
  • Firmware upload/download via HTTP
  • Configuration upload/download through HTTP
  • Hardware reset button for system reboot or reset to factory default
  • PLANET Smart Discovery Utility
FGSD-1008HPS - 8-Port 30W PoE Switch with 2-Port Up Link and 2 Port SFP (120W)
Hardware Specifications
10/100Mbps Copper Ports 8 10/100BASE-TX RJ45 Auto-MDI/MDI-X ports
Gigabit Copper Ports 2 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X ports
SFP/mini-GBIC Slots 2 1000BASE-X SFP interfaces, shared with Port-9 to Port-10
Switch Architecture Store-and-Forward
Switch Fabric 5.6Gbps / non-blocking
Throughput 4.16Mpps@64Bytes
Address Table 4K entries, automatic source address learning and ageing
Shared Data Buffer 2.75Mb embedded memory for packet buffers
Flow Control IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex
Maximum Transmit Unit 1536 Bytes
Reset Button < 5 sec: System reboot > 5 sec: Factory default
Dimensions (W x D x H) 330 x 155 x 43.5 mm, 1U height
Weight 1.5kg
LED System: Power (Green) 10/100BASE-TX RJ45 Interfaces (Port1 to Port8): 10/100Mbps LNK/ACT (Green) PoE In-Use (Orange) 10/100/1000BASE-T RJ45 / SFP Interfaces (Port 9 to Port10): LNK/ACT (Green) 100/1000 (Green) PoE Usage 30W, 60W, 90W, 120W (Orange)
Cable Twisted-Pair 10BASE-T: 2-Pair UTP CAT. 3, 4, 5, up to 100 meters 100BASE-TX: 2-Pair UTP CAT. 5, 5e up to 100 meters 1000BASE-T: 4-Pair UTP CAT. 5e, 6 up to 100 meters Fiber-Optic Cable 1000BASE-SX : 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 550m (varying on SFP module) 1000BASE-LX : 9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/60/70/120 kilometers (varying on SFP module)
Power Requirements 100~240V AC, 50/60Hz, 2A
Power Consumption Max. 150 watts / 511BTU
ESD Protection Contact Discharge 8KV DC Air Discharge 8KV DC
Power over Ethernet
PoE Standard IEEE 802.3af / 802.3at PoE / PSE
PoE Power Supply Type End-span
PoE Power Output Per Port 52V DC, Max. 30.8 watts
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget 125 watts (max.)
PoE Ability PD @ 7 watts 8 units PD @ 15.4 watts 8 units PD @ 30.8 watts 4 units
Layer 2 Functions
Port Management Port disable / enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow Control disable / enable Bandwidth Control / Broadcast Storm Control
Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status
Port Mirroring TX / RX / Both Many-to-1 monitor
VLAN 802.1Q tagged-based VLAN, up to 30 VLAN groups, out of 4094 VLAN IDs Port-based VLAN, up to 10 VLAN groups MTU VLAN
QoS Allow to assign low / high priority on each port First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy
Security Control MAC address binding TCP & UDP Filter
Spanning Tree Protocol STP, IEEE 802.1D Spanning Tree Protocol RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
Link Aggregation 2 groups of 4-Port 10/100BASE-TX trunk supported 1 group of 2-Port 10/100/1000BASE-T trunk supported
DHCP Relay DHCP Relay Agent / DHCP Relay Server
PoE Setting PoE Status / PoE Port Setting / PoE Sequential
Configuration Back / Restore Configuration backup / restore through Web interface
IGMP Snooping IGMP (v1 / v2) Snooping, up to 32 multicast groups
Management Functions
Basic Management Interfaces Web browser, SNMP v1 / v2c
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3z Gigabit Ethernet IEEE 802.3x Full-duplex flow control IEEE 802.1Q VLAN IEEE 802.1p QoS IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus
Environment
Operating Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing)
Click here to open the datasheets