Back

VC-232G – Ethernet over Coax (VDSL2) Converter Gigabit

Part Number:VC-232G

IN STOCK. Same day shipping available.

Ethernet over Coaxial VDSL2 (BNC) Converter 10/100/1000T

  • ITU-T G.993.5 G.Vectoring and G.INP
  • Upstream/Downstream bandwidth up to 200/100Mbps
  • CO/CPE mode selectable via DIP switch
  • Selectable target band plan and SNR margin
  • Half duplex back pressure and IEEE 802.3x full duplex pause frame flow control
  • One BNC connector for VDSL connection
  • Uses existing RG59/RG6 coaxial cable
  • Used in pairs to extend Point-to-Point connection up to 1.4km
  • Supports a packet size of up to 1522 bytes, IEEE 802.1Q VLAN tag transparency
  • Advantage of minimum installation time (Simply by Plug-and-Play)
  • Supports extensive LED indicators for network diagnosis
  • Co-work with PLANET media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48)
  • Compact in size and easy to install
VC-232G - Ethernet over Coax (VDSL2) Converter Gigabit
Hardware Specifications
TP interface 1 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
VDSL Interface 1 BNC female Ethernet over Coaxial Cabling Coaxial cable: 75 ohm RG-6/U cable, less than12Ω/1000 ft RG-59/U cable, less than 30Ω/1000 ft. Maximum Distance Max. 1400m with data transmission (4,593ft.)
Functionality DIP-1: Select CO or CPE mode DIP-2: Select G.INP or Interleaved mode DIP-3: Select Band Profile (Asymmetric or Symmetric) DIP-4: Select SNR of 12dB or 8dB
Dimensions (W x D x H) 70 x 97 x 26 mm
Weight 185g
Power Requirement DC 5V, 2A external power
LED Indicators Power: Green 1000BASE-T LNK/ACT: Green VDSL: Green CO: Green CPE: Green
Housing Metal
Switch Specifications
Switch Processing Scheme Store-and-Forward
Address Table 2K entries
Flow Control Back pressure for half duplex IEEE 802.3x pause frame for full duplex
System Specifications
VDSL Compliance
  • VDSL-DMT

ITU-T G.993.1 VDSL ITU-T G.993.1 VDSL ITU-T G.997.1 ITU-T G.993.2 VDSL2 (Profile 17a/30a Support) ITU-T G.993.5 G. Vectoring ITU-T G.998 G.INP

Standards Conformance
Standards Compliance IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-duplex flow control IEEE 802.1p Class of Service ITU-T G.993.1 VDSL ITU-T G.997.1 ITU-T G.993.2 VDSL2 (Profile 17a/30a Support) ITU-T G.993.5 G.Vectoring and G.INP ITU-T G.998
Regulatory Compliance FCC Part 15 Class A, CE
Environment
Temperature Operating: 0~50 degrees C Storage: -10~70 degrees C
Humidity Operating: 5~95% (non-condensing) Storage: 5~95% (non-condensing)
Performance
Coaxial Performance Interleave(Upstream/Downstream: Mbps) Asymmetric (8dB): 200m ->88Mbps/168Mbps 400m ->75Mbps/160Mbps 600m ->59Mbps/129Mbps 800m ->32Mbps/110MbpsAsymmetric (12dB): 200m ->78Mbps/145Mbps 400m ->69Mbps/137Mbps 600m ->48Mbps/118Mbps 800m ->26Mbps/94MbpsSymmetric (8dB): 200m ->129Mbps/131Mbps 400m ->117Mbps/122Mbps 600m ->101Mbps/92Mbps 800m ->62Mbps/73Mbps Symmetric (12dB): 200m ->117Mbps/123Mbps 400m ->102Mbps/102Mbps 600m ->88Mbps/82Mbps 800m ->47Mbps/56Mbps G.INP(Upstream/Downstream: Mbps) Asymmetric (8dB): 200m ->95Mbps/200Mbps 400m ->82Mbps/175Mbps 600m ->59Mbps/151Mbps 800m ->37Mbps/122Mbps Asymmetric (12dB): 200m ->89Mbps/181Mbps 400m ->71Mbps/156Mbps 600m ->46Mbps/136Mbps 800m ->30Mbps/102Mbps Symmetric (8dB): 200m ->147Mbps/147Mbps 400m ->132Mbps/135Mbps 600m ->108Mbps/104Mbps 800m ->76Mbps/78Mbps Symmetric (12dB): 200m ->138Mbps/143Mbps 400m ->116Mbps/120Mbps 600m ->91Mbps/89Mbps 800m ->58Mbps/60Mbps Note: As there are various resistance values in the category of RG-59/U or RG-6/U cable, the actual data rate will vary on the quality of the copper wire and environmental factors.
Click here to open the datasheets