WGS-804HP – 8-Port Gigabit Flat Type Switch with 4-Port 30W PoE

Part Number:WGS-804HP

IN STOCK. Same day shipping available.

IP30 8-Port Gigabit Wall-mount Switch with 4-Port 30W PoE (-10 to 60 C), dual redundant power input on 48-56V DC terminal block and power jack

Physical Port

  • 8-Port 10/100/1000BASE-T Gigabit RJ-45 copper with 4-Port IEEE 802.3at / af PoE Injector (Port-1 to Port-4)

Power over Ethernet

  • Complies with IEEE 802.3at High Power over Ethernet end-span PSE
  • Backward compliant with IEEE 802.3af Power over Ethernet end-span PSE
  • Up to 4 ports of IEEE 802.3af / 802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters

Layer 2 Features

  • High performance Store and Forward architecture; runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • 9K Jumbo frame supports in 1000Mbps duplex mode
  • Automatic address learning and address aging

Industrial Case / Installation

  • Compact size, wall-mounted, magnetic wall mount and DIN-rail design
  • IP30 metal chassis
  • Supports -10 to 60 degrees C operating temperature
  • Supports EFT 6000VDC protection for power line
  • Supports ESD 6000VDC Ethernet protection
  • LED indicators for real-time PoE usage
  • 48V~56V DC input range for booting with polarity reverse protect function
WGS-804HP - 8-Port Gigabit Flat Type Switch with 4-Port 30W PoE
Hardware Specifications
Network Connector 8-Port RJ45 for 10/100/1000BASE-T
PoE Inject Port 4-Port with 802.3af / 802.3at PoE injector function (Port-1 to Port-4)
Switch Architecture Store and forward
MAC Address Table 8K MAC address table with auto learning function
Data Buffer 1Mbit
Switch Fabric 16Gbps / non-blocking
Switch Throughput 11.9Mpps@64Bytes
Jumbo Frame 9Kbytes
Flow Control IEEE 802.3x pause frame for full duplex Back pressure for half duplex
LED Indicators Power LED: Power (Green) PoE Power Usage LED: 30W, 60W, 90W, 120W (Green) PoE Port(Port-1 to Port-4): PoE-in-Use (Orange) LNK/ACT (Green) 10/100/1000BASE-TX Port (Port-5 to Port-8): 1000 (Green) LNK/ACT (Green)
Connector ■ Removable 3-pin terminal block for power input - Pin 1/2 for DC Power - Pin 3 for earth ground ■ DC power jack with 2.0mm central pole
Power Requirements 48~56V DC, 3A (max.)
Power Consumption 140 watts / 478BTU
ESD Protection 6KV DC
EFT Protection 6KV DC
Enclosure IP30 metal
Dimensions (W x D x H) 148 x 24.2 x 134 mm
Weight 510g
Installation Wall mount, magnetic wall mount and DIN-rail kit
Power over Ethernet
PoE Standard IEEE 802.3af / 802.3at Power over Ethernet PSE
PoE Power Supply Type End-span
PoE Power Output ■ IEEE 802.3af Standard - Per port 48V~56V DC (depending on the power supply), max. 30 watts ■ IEEE 802.3at Standard - Per port 50V~56V DC (depending on the power supply), max. 30 watts
Power Pin Assignment 1/2(+), 3/6(-)
* PoE Power Budget 120 watts (depends on power input)
Max. Number of Class 2 PD 4
Max. Number of Class 3 PD 4
Max. Number of Class 4 PD 4
Standard Conformance
Standard Compliance IEEE 802.3: Ethernet IEEE 802.3u: Fast Ethernet IEEE 802.3ab: Gigabit Ethernet IEEE 802.3x: Flow Control IEEE 802.3af: Power over Ethernet IEEE 802.3at: High Power over Ethernet
Regulation Compliance FCC Part 15 Class A, CE
Stability Testing IEC 60068-2-32 (Free fall) IEC 60068-2-27 (Shock) IEC 60068-2-6 (Vibration)
Operating Temperature: -10 ~ 60 degrees C Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -20 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing)
Standard Accessories ■ User’s manual x1 ■ Magnetic kit x 1 ■ DIN-rail kit x 1 ■ Wall-mounted Kit x 1 ■ Dust cap x 8 ■ 3-pin Terminal Block Connector x 1
* The actual power output may vary on the external power system with maximum 120 watts PoE budget for the switch.
Click here to open the datasheets